Set-based and Dynamical Feedback-augmented Hands-off Control (Andrei’s Version)
Andrei Sperilă, Sorin Olaru, Stéphane Drobot · 2025
Read Set-based and Dynamical Feedback-augmented Hands-off Control (Andrei’s Version) by Andrei Sperilă, Sorin Olaru, Stéphane Drobot (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-11795.txt.
Introduction
Andrei Sperilă, Sorin Olaru, and Stéphane Drobot propose a spatial take on hands-off control, the art of actuating a system as little as possible. Their 2025 paper contrasts with the usual timing view. Instead of asking when to intervene, they define a region of the state space where the plant may drift freely, untouched, in open loop.
Dynamical feedback plus invariant-set constraints steer the state into that hands-off region and keep the guarantees intact. The resulting design procedure is computationally light while carrying strong theoretical assurances. A practical example shows the scheme working intuitively. The approach suits systems where actuation is costly, wear-inducing, or best reserved for genuine need, from robotics to process control.
Catalog record
| CREATOR | Andrei Sperilă, Sorin Olaru, Stéphane Drobot |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 65 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-11795
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Set-based and Dynamical Feedback-augmented Hands-off Control (Andrei’s Version) Andrei Sperilă, Sorin Olaru, Stéphane Drobot Abstract A novel set-theoretical approach to hands-off control is proposed, focusing on spatial arguments for command limitation rather than temporal ones. By employing dynamical feedback alongside invariant set-based constraints, actuation is employed only to drive the system’s state within a “hands-off region” of its state-space, where the plant can freely evolve in open-loop configuration. A computationally-efficient procedure with strong theoretical guarantees is devised, and its effectiveness is showcased via an intuitive practical example. I Introduction Classical formulations of the hands-off problem, such as the seminal work presented in Chapter 6 of [ 1 ] , focused on minimizing the amount of time in which control action is applied to a system, while ensuring satisfactory closed-loop performance guarantees in the presence of disturbance or model uncertainty. This approach was extensively investigated in [ 2 ] , where all the aforementioned aspects were addressed for a broad class of systems. While the problem of time-optimal hands-off control is still being studied in system-theoretical literature [ 3 , 4 , 5 ] , the spatial aspect of this design problem has not received the same level of attention. In this paper, we tackle the problem of computing and then enforcing, by means of dynamical feedback, the existence of a hands-off region in the state space of a finite-dimensional, linear, and time-invariant (FDLTI) system. The key feature of such a region is the fact that, when the system’s state is located within it, the proposed control algorithm does not act upon the plant. It is only when the system’s state leaves the hands-off region that the controller is allowed to act, in order to drive the system’s state back into the aforementioned region. Once this is achieved, the feedback loop is interrupted, and the system’s state is allowed to drift within the hands-off region. Despite the shared switching mechanism, the technique presented in this paper is notably distinct from the safety filter -based approach proposed in [ 6 ] , both in terms of the commutation’s nature (our approach switches between open- and closed-loop configurations, rather than two distinct control laws) and in terms of the associated computational cost (our solution involves merely the implementation of an FDLTI controller). Likewise, due to the set-theoretical focus of our approach, the use of strong set invariance (see, for example, Chapter 4 of [ 7 ] ) and that of inexpensive state-space-based control laws differentiates our proposed solution from the barrier function -based technique discussed in [ 8 ] . Once notation is introduced in Section II-A , the control problem described above will be rigorously formulated in Section II-B . Following this, the control solution, which ensures the desired functioning, will be presented in Section III , and its application will be showcased in Section IV . Alongside Section V , which contains a set of concluding remarks, the manuscript also includes an appendix, which holds the proofs of the main theoretical results presented in this paper. II Preliminaries II-A Notation Let \mathbb{N} and \mathbb{R} denote the set of natural and real numbers, respectively. Additionally, let \mathbb{N}_{>0}:=\{n\in\mathbb{N}:n>0\} and, for a,b\in\mathbb{R} with a\leq b , let \mathbb{N}_{[a,b]}:=\{n\in\mathbb{N}:a\leq n\leq b\} . For any set \mathcal{M} , let \mathcal{M}^{n} and \mathcal{M}^{p\times m} stand for the set of all vectors of dimension n and, respectively, the set of all matrices of dimension p\times m whose entries belong to \mathcal{M} . The operator \|\cdot\| represents the (induced, for matrix arguments) 2-norm and e_{i} stands for the i^{\text{th}} column of the identity matrix, whose dimension is inferred from the available context. For any n\in\mathbb{N}_{>0} , we proceed to denote by 0_{n} and by 1_{n} those n -dimensional vectors whose entries are all 0 and, respectively, all 1 . For any two sets \mathcal{X},\mathcal{Y}\subseteq\mathbb{R}^{n} , given an arbitrary n\in\mathbb{N}_{>0} , the operation \mathcal{X}\oplus\mathcal{Y} denotes the Minkowski sum, while \mathcal{X}\ominus\mathcal{Y} stands for the Pontryagin difference. Finally, we employ the shorthand notation (-\mathcal{X}):=\{-x:x\in\mathcal{X}\} , and for any two polyhedra (see, for example, Section 3.3 in [ 7 ] ) \mathcal{Y}_{1},\mathcal{Y}_{2}\subseteq\mathbb{R}^{n} , the operator \mathrm{conv}(\mathcal{Y}_{1},\mathcal{Y}_{2}) computes the convex hull of the vertices which make up \mathcal{Y}_{1} and \mathcal{Y}_{2} . II-B Problem Statement We consider a state-space system with an n -dimensional state vector, denoted by x[k] , whose dynamics are as follows \left\{\begin{aligned} x[k+1]=&\ Ax[k]+\sigma[k]Bu[k]+(1-\sigma[k])d[k]+w[k],\\ y[k]=&\ x[k]+v[k],\end{aligned}\right.\vskip-2.84526pt (1) The m -dimensional vector u[k] represents the system’s controlled inputs, whereas d[k]\in\mathcal{D} stands for the uncontrolled ones. The vector w[k]\in\mathcal{W} represents the process noise, while \sigma[k]\in\mathbb{B}:=\{0,1\} is a switching signal which governs the system’s binary functioning, and v[k]\in\mathcal{V} designates the measurement noise. We also make the following assumption. Assumption II.1 . All the sets discussed in this section (with the exception of \mathbb{B} ) are polytopic (see Section 3.3 in [ 7 ] ) and they include the zero vector inside their respective interiors. Given \mathcal{U}\subset\mathbb{R}^{m} along with \mathcal{S}\subset\mathcal{X}\subset\mathbb{R}^{n} which satisfy \displaystyle\exists\,\varepsilon_{p},\varepsilon_{m}\in(0,1)\text{ s.t. }\mathcal{V}\subseteq\varepsilon_{p}\,\mathcal{S}\text{ and }(-\mathcal{V})\subseteq\varepsilon_{m}\,\mathcal{S}, (2a) \displaystyle\exists\,\delta>0\text{ s.t. }\overline{\mathcal{B}}_{\delta}:=\{r\in\mathbb{R}^{n}:\|r\|\leq\delta\}\subseteq\mathcal{S}, (2b) \displaystyle\mathcal{S}^{+}:=A\,\mathcal{S}\oplus\mathcal{W}\oplus\mathcal{D}\subseteq\mathcal{X}, (2c) we assume that the state is initialized somewhere in the set \mathcal{S}_{c}:=\mathrm{conv}(\mathcal{S},\mathcal{S}^{+})\subseteq\mathcal{X} , with the inclusion following from Assumption II.1 , from \mathcal{S}\subset\mathcal{X} and from ( 2c ). The goal of the paper is to design a control scheme that computes appropriate time-domain functions u[k] and \sigma[k] such that the system described by ( 1 ) functions as follows: i) the constraints x[k]\in\mathcal{X} along with u[k]\in\mathcal{U} must be satisfied at all time instants; ii) If the system has been initialized outside of \mathcal{S} or if the system’s state strays outside of \mathcal{S} , then \sigma[k] must be set to 1 and the state vector must be driven to within some \Omega_{I}\subseteq\mathcal{S} (to be designed in the sequel); iii) After the system’s state has been brought inside \Omega_{I} or if the system has been initialized in \mathcal{S} , then \sigma[k] must be set to 0 and the system must be allowed to drift within \mathcal{S} , as influenced by w[k] and by d[k] . Remark II.1 . Recall the fact that x[k] is not directly available for measurement, due to the noise vector v[k] . Checking, therefore, whether x[k]\in\mathcal{S} must be done via the sufficient condition y[k]\in(\mathcal{S}\ominus(-\mathcal{V})) (which is non-empty, due to ( 2a )-( 2b ) and to Assumption II.1 ). Consequently, we will treat y[k]\not\in(\mathcal{S}\ominus(-\mathcal{V})) as corresponding to x[k]\not\in\mathcal{S} , since we are unable to guarantee the fact that x[k]\in\mathcal{S} . Moreover, the same arguments hold when assessing whether x[k]\in\Omega_{I} , which will be designed such that (\Omega_{I}\ominus(-\mathcal{V}))\neq\{\emptyset\} . The use of certain observer-based strategies could mitigate these shortcomings, yet their use is beyond the scope of this paper, and we assume that \mathcal{V} is sufficiently small (with respect to \mathcal{S} and \Omega_{I} ) so as not to impact performance significantly. Having presented the desired functioning of the system described by ( 1 ), we now propose a control solution which satisfies the operating principles laid out in points i) - iii) . III Main Results III-A Theoretical Aspects One of the main contributions of the work presented in this paper is the fact that, when \sigma[k]=1 , we compute u[k] via dynamical feedback. Thus, consider the systems \left\{\begin{aligned} x_{K}[k+1]=A_{K}x_{K}[k]+B_{K}y[k],\\ u[k]=C_{K}x_{K}[k]+D_{K}y[k],\end{aligned}\right. (3) in which x_{K}[k] represents the controller’s n_{K} -dimensional