EHT Time Domain Working Group A Novel Calibration and Imaging Method for ALMA Observations of Sgr A ∗

Ezequiel Albentosa-Ruiz, Iván Martí-Vidal, Ciriaco Goddi, Alejandro Mus · 2025

Read EHT Time Domain Working Group A Novel Calibration and Imaging Method for ALMA Observations of Sgr A ∗ by Ezequiel Albentosa-Ruiz, Iván Martí-Vidal, Ciriaco Goddi, Alejandro Mus (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-11258.txt.

Introduction

The black hole at our galaxy's core flickers fast, while its spiral shroud stays calm, and that calm can calibrate the flicker. Ezequiel Albentosa-Ruiz, Iván Martí-Vidal, Ciriaco Goddi, and Alejandro Mus build that trick in a 2025 report. Their data come from the ALMA radio array.

Steps run from a first image, to shroud-only maps, to a two-part fit per time slice. The fit returns the core's flux at each moment. Brightness curves follow for total, polarized, and circular light. One April 2018 run shows the method at work. The script runs inside the field's standard CASA package.

Catalog record

CREATOREzequiel Albentosa-Ruiz, Iván Martí-Vidal, Ciriaco Goddi, Alejandro Mus
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-11258

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

EHT Time Domain Working Group A Novel Calibration and Imaging Method for ALMA Observations of Sgr A ∗ Ezequiel Albentosa-Ruiz, Iván Martí-Vidal, Ciriaco Goddi, Alejandro Mus Abstract Event Horizon Telescope Memo Series EHT Memo 2025-TDWG-01 1 Dpt. Astronomia i Astrofísica, Universitat de València, C/ Dr. Moliner 50, 46120 Burjassot, Spain 2 Observatori Astronòmic, Universitat de València, C/ Cat. José Beltrán 2, 46980 Paterna, Spain 3 Universidade de São Paulo, Instituto de Astronomia, Geofísica e Ciências Atmosféricas, Departamento de Astronomia, São Paulo, SP 05508-090, Brazil 4 Dipartimento di Fisica, Universitá degli Studi di Cagliari, SP Monserrato-Sestu km 0.7, I-09042 Monserrato, Italy 5 INAF - Osservatorio Astronomico di Cagliari, via della Scienza 5, I-09047 Selargius (CA), Italy 6 INFN, Sezione di Cagliari, Cittadella Univ., I-09042 Monserrato (CA), Italy Abstract This document presents a novel method for the intra-field calibration and imaging of the radio source Sgr A ∗ , observed with the Atacama Large Millimeter/submillimeter Array (ALMA). Sgr A ∗ is a complex source comprising two components: the compact core (which exhibits high variability) and the extended minispiral (which is relatively stable over short timescales). The novel approach consists in a self-calibration method that employs the extended structure of the source (the minispiral) to calibrate the flux variability of the compact core. The algorithm 1 1 1 You can download the full pipeline in github, using the link: https://github.com/ealruiz/calminispiral . involves several steps: (1) an initial CLEAN image is generated for the entire source; (2) the core is subtracted, leaving only the minispiral; (3) a two-component visibility model is constructed, comprising the minispiral and the core; (4) the model is fitted to the data, retrieving flux density parameters for each integration time; and (5) the data are scaled and calibrated, resulting in nearly constant brightness for the minispiral and variable flux for the core. The implementation of this algorithm through a script in the CASA package is described, detailing the configuration parameters and the steps involved. The success of the method is demonstrated through light curves of Sgr A ∗ observed on day 21 April 2018 in Band 6, as part of the 2018 EHT campaign. The light curves have been produced for Stokes I (total intensity), linear polarized intensity, EVPA (electric vector position angle), and Stokes V (circular polarization), providing valuable insights into the variability of this radio source. 1 Introduction ALMA data acquired during VLBI observations are calibrated in a process known as “Level 2 Quality Assurance” (QA2). This process is based on self-calibration assuming a point source with a constant flux density. While this approach is well justified (and effective) for most VLBI targets, it is not optimal for Sgr A*. In fact, Sgr A ∗ can be understood as the sum of two components: • An extended component (up to parsec scales), known as the minispiral . Given its large extension, it is safe to assume that this component is not variable on the timescales comparable to the duration of the observations (i.e., a few hours). • A compact, bright component, which presents high variability: Sgr A ∗ itself . The flux density of the Sgr A ∗ core is higher than the total flux density of the minispiral. The constant flux density assumption of the QA2 calibration, results in a core with a constant brightness while transfers all the variability to the minispiral 2 2 2 If we could make a movie of the Fourier Transform (FT) of the QA2 calibrated visibilities, we would get a core with almost constant flux, while the brightness of all the minispiral would be pulsating (the flux decreases and increases at short timescales), as opposed to the true behaviour of the source. . In order to derive the light curves of Sgr A ∗ (i.e. the compact core), we designed and implemented a novel algorithm to extend and improve the QA2 gain calibration for variable sources. 2 Algorithm description Our algorithm consists in an intra-field calibration and imaging of ALMA observations of Sgr A ∗ . The algorithm is already implemented in a script in CASA (see sec. 3 ) and consists of 4 main steps: • Step 1: CLEAN image First, we take all the visibilities acquired in the same track and calibrated in the QA2 process and we generate an image of the source (i.e. the core and the minispiral). This image, which we indicate with IM0 , typically presents artefacts (e.g. negative artefacts that mimic partial sidelobes of the PSF around Sgr A ∗ ), but serves as an initial approximation to the minispiral. • Step 2: Separate models We subtract the core of Sgr A ∗ from the image space ( IM0 ) to get an image of only the minispiral ( IM1 ), by selecting the pixels of the core (strongest CLEAN component) and choosing one of the two following approaches: – set the flux of the pixels to 0, – replace the flux of the pixels to the extended brightness of the minispiral (i.e. the average of the neighbouring pixels) to get a continuation of the minispiral where the core was located. Both approaches give compatible results after the first iteration of the algorithm. • Step 3: Visibility (two-component) model fitting Next, we construct a Visibility model from the IM1 CLEAN components, as the FT of the minispiral ( \texttt{MOD}=FT(\texttt{IM1}) ) scaled by a time-varying factor S_{1} (due to the variability of the minispiral’s total flux density 3 3 3 Note that the minispiral is introducing time-dependent changes on the visibilities, which come from the source structure and are absorbed by the FT; therefore S_{1} only absorbs the time variation due to the variability of the minispiral’s total flux density. ) and a constant factor S_{2} (i.e. the FT of a point source at the center of the image): V^{mod}=S_{1}\cdot\texttt{MOD}+S_{2}. (2.1) This visibility model describes the entire structure of Sgr A ∗ , with a fixed minispiral ( IM1 ) and the core (i.e. a centered point source). For each integration time, we fit the observed visibilities to our visibility model, that is, we minimize the \chi^{2} (error function) \chi^{2}(t_{int})=\sum_{i,t=t_{int}}\omega_{i}\cdot\absolutevalue{V_i^{mod}(t) - V_i^{obs}(t)}^{2}=\sum_{i,t=t_{int}}\omega_{i}\cdot\absolutevalue{ S_1 \cdot\texttt{MOD}(t) + S_2 - V_i^{obs}(t)}^{2}, (2.2) where \omega_{i} are the statistical weights of each visibility. The fitting parameters (different for each integration time t_{int} ) are S_{2} (the flux of the core) and S_{1} (a scale factor for the minispiral, which accounts for the artificial variability introduced by the QA2). Our approach is the standard least-squared minimization of the \chi^{2} function: \displaystyle\frac{\partial\chi^{2}}{\partial S_{m}} \displaystyle=\frac{\partial}{\partial S_{m}}\left[\sum_{i}\omega_{i}\left(S_{1}\cdot\texttt{MOD}_{i}+S_{2}-V_{i}^{obs}\right)\left(S_{1}\cdot(\texttt{MOD}_{i})^{\ast}+S_{2}-(V_{i}^{obs})^{\ast}\right)\right]=0; (2.3) \displaystyle\frac{\partial\chi^{2}}{\partial S_{1}} \displaystyle=2\sum_{i}\omega_{i}\left[\absolutevalue{\texttt{MOD}_i}^{2}S_{1}+Re\{V_{i}^{mod}\}S_{2}-\left(Re\{\texttt{MOD}_{i}\}Re\{V_{i}^{dat}\}+Im\{\texttt{MOD}_{i}\}Im\{V_{i}^{dat}\}\right)\right]=0; (2.4) \displaystyle\frac{\partial\chi^{2}}{\partial S_{2}} \displaystyle=2\sum_{i}\omega_{i}\left[Re\{\texttt{MOD}_{i}\}S_{1}+S_{2}-Re\{V_{i}^{dat}\}\right]=0. (2.5) Since the \chi^{2} is linear for the fitting parameters S_{k} , we can easily retrieve the algebraic expression of the Hessian H and the Residual vector \vec{b} , corresponding to the matrix formulation of the least-squared minimization problem, with Parameter vector \vec{S} : H\vec{S}=\vec{b}. (2.6) Using this formalism, from eqs. 2.5 , we retrieve: \displaystyle H \displaystyle=\begin{pmatrix}2\sum_{i}\omega_{i}\absolutevalue{V_i^{mod}}^{2}&2\sum_{i}\omega_{i}Re\{V_{i}^{mod}\}\\ 2\sum_{i}\omega_{i}Re\{V_{i}^{mod}\}&2\sum_{i}\omega_{i}\end{pmatrix}, (2.7) \displaystyle\vec{b} \displaystyle=\begin{pmatrix}2\sum_{i}\omega_{i}Re\{V_{i}^{mod}\}Re\{V_{i}^{dat}\}+Im\{V_{i}^{mod}\}Im\{V_{i}^{dat}\}\\ 2\sum_{i}\omega_{i}Re\{V_{i}^{dat}\}\end{pmatrix}. (2.8) What about polarization? As the minispiral polarization is negligible (due to Sgr A ∗ dominating both in total intensity and polarization brightness), the model for Stokes Q,U,V is a centered point source (i.e. V^{mod}=S , being S the flux of the core Stokes parameter). Under

Read the complete text