Phasor-Pursuit Directional Modulation PubID: pubid: 979-8-3503-9214-2/24/$31.00 © 2024 IEEE
David Couto, Arash Samani, Alec Yonika · 2025
Read Phasor-Pursuit Directional Modulation PubID: pubid: 979-8-3503-9214-2/24/$31.00 © 2024 IEEE by David Couto, Arash Samani, Alec Yonika (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-10459.txt.
Introduction
David Couto, Arash Samani, and Alec Yonika present a cheaper way to hide radio signals from eavesdroppers in a paper from 2025. Directional modulation scrambles a beam so only the intended receiver reads it cleanly. Classic versions waste much power and repeat patterns on small arrays. Their phasor-pursuit method rotates element weights by real-valued phase steps, building a random walk to each symbol.
The scheme supports many modulation types in phase, amplitude, or both. Power loss versus plain beamforming can be as small as one decibel, far better than the usual six. The set of possible weights is also much larger, resisting pattern analysis. Tests used a standard noise injection setup. The authors target small arrays like home routers.
Catalog record
| CREATOR | David Couto, Arash Samani, Alec Yonika |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 29 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-10459
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Phasor-Pursuit Directional Modulation PubID: pubid: 979-8-3503-9214-2/24/$31.00 © 2024 IEEE David Couto, Arash Samani, Alec Yonika Abstract Emitting phased array RF systems have to contend with an ever-increasing number of eavesdroppers as technological advancements provide lower cost and/or more capable radios. Often, eavesdroppers can accumulate sufficient information transmitted in sidelobes by integrating over long enough periods. Directional modulation (DM) disrupts this capability by inducing a randomized walk through IQ-space to reach a pertinent location which corresponds to a symbol of particular amplitude and phase. This results in higher secrecy capacity. The path taken by the cumulative element contributions are determined by the complex weights of individual transmitters. Because large phased arrays support a large number of available paths, repetitions of applied weights are not concerning. The same cannot be said for arrays that consist of only a few elements, e.g. WiFi routers. We introduce a computationally efficient and flexible framework for DM that utilizes real-valued phase rotations of element weights. It supports a wide family of modulation schemes in phase and/or amplitude. By employing the state-of-the-practice orthogonal noise injection framework, we demonstrate a richness of unique paths which resolves concerns about repeated weights. In our proposed scheme, there is a small reduction in received power compared to traditional beamforming, as little as 1 dB, which is an advantage over conventional directional modulation which typically sacrifices 6 dB of power. Also, there is a significantly larger set of possible element weights than that of the conventional scheme. This feature protects against the possibility of eavesdroppers breaking the distortion-based obfuscation of symbols over repeated observations. From these two key benefits, Phasor Pursuit Directional Modulation provides more secrecy capacity than conventional directional modulation via increased power delivery and increased receiver SNR and does so with resilience to advanced eavesdropping threats. I Introduction Fielded transmitting RF array systems require the means to protect their transmissions from potential eavesdroppers. One tactic is to protect the communication at the symbol level, one example of a technology in this family of solutions is directional modulation (DM). To provide security, DM relies upon obfuscation of the symbols in power radiated off-target, i.e. side lobes, if we consider the context of a traditional uniform linear array. This is done by augmenting transmitted signals at the element level such that the a-priori secure communication direction is the only direction where the waves combine with the intended phase and amplitude, which makes eavesdropping infeasible [ 1 ] . Contrasting with standard cryptographic approaches to protect transmitted content [ 2 ] , DM can be implemented at the physical layer [ 3 , 4 ] for information theoretic security [ 5 ] . DM has been described as either a direct manipulation of the antenna radiating structures, or a perturbation of the complex array element excitation weights [ 6 ] . In many DM systems, the orthogonal vector approach introduced in [ 1 , 7 ] is employed. When we use this paradigm, a DM implementation is a modification of array excitation weights corresponding to a \pm\pi/2 rotation; this is similar to the artificial noise approach utilized by the information theory community [ 8 , 9 ] . These induced rotations are balanced, such that the cumulative transmission arrives on-phase. This results in a necessary trade of power placed on target by the transmitting platform, e.g. half of the elements experiencing a rotation leads to a roughly 6 dB loss, in exchange for the increased security off-target. However, this presents a problem that becomes apparent in the limit of few-element arrays. This comes about from the limited set of unique combinations of conventionally-transmitting and randomly-rotated nodes. For a capable enough eavesdropper, the distorted symbols may be recoverable as was demonstrated in [ 10 ] . A simple extension of the DM concept is presented in [ 11 ] in which the random phase rotations induced by the array excitation weights are chosen to be real-valued and small. This technique induces the desired security aspects contained in DM, while creating a larger set of unique combinations; however, this approach induced some variability in the received power at the target location. Other approaches utilize genetic algorithms [ 4 ] or particle-swarming [ 12 ] methods to perform the optimization task of selecting the array weights. The use of these optimization approaches can be prohibitively expensive in terms of computational cost, especially when the transmitting system is expected to perturb array weights on a per-symbol basis. In-between these two families of approaches is where our work is placed; providing a computationally-efficient means to randomly perturb the individual array weights such that security off-target is increased yet providing enough constraint so that the energy delivered on-target is constant, or for amplitude modulation schemes, matching the desired amplitude. This paper is organized as follows. In Section II , we provide the preliminary mathematical groundwork necessary for the continued discussion and present the operational scenario that guides the rest of our discussion. We then demonstrate the functionality of a conventional DM framework. Section III discusses the real-valued phase approach to DM, wherein we also discuss modifications to further extend this capability and provide broad operational relevance. Results that provide direct comparison between conventional and real-valued phase DM is discussed in Section IV with final statements following in V . II Background Herein we present the salient mathematical features of DM to aid in denoting the differing, noteworthy, behaviors between conventional and real-valued phase approaches to DM. This discussion is concluded with the operational scenario that is used as the exemplar, and corresponding conventional DM performance, which will be used as the operational scenario for future discussions on the performance benefits and differences between conventional and real-valued phase DM unless specified otherwise. II-A Mathematical Description We assume isotropically-radiating antenna elements with uniform array spacing of one half wavelength. The far-field pattern, \mathbf{E}(\theta) , is determined as a sum of the individual element contributions with the respective element excitations \alpha_{n} , \mathbf{E}(\theta)=\sum_{n=1}^{N}(\alpha_{n}e^{i\pi(n-\frac{N+1}{2})cos(\theta)}). (1) Implementing DM is achieved through replacing the individual element excitations with the product of the modulated data stream (at symbol level) and complex gain; the gain of which possesses unity magnitude and non-zero phase in the IQ-space, i.e. \alpha_{n}\equiv d_{m}G^{*}_{n} and G_{n}=e^{j\phi_{n}} . Moving from a single epoch to multiple epoch processing of DM sequences introduces the requirement of constraining orthogonality across the gain differences over the array. Consider two epochs, wherein the gain coefficients can be represented via vectors \vec{G}_{u} and \vec{G}_{v} respectively. The gain difference is simply, \Delta\vec{G}=\vec{G}_{u}-\vec{G}_{v} . Then, discretizing over the spatial direction in Eq. 1 , we denote the discrete channel matrix as \mathbf{H}\equiv\begin{bmatrix}e^{i(1-\frac{N+1}{2})\pi cos(\theta_{1})}&\ldots&e^{i(N-\frac{N+1}{2})\pi cos(\theta_{1})}\\ e^{i(1-\frac{N+1}{2})\pi cos(\theta_{2})}&\ldots&e^{i(N-\frac{N+1}{2})\pi cos(\theta_{2})}\\ \vdots&\ddots&\vdots\\ e^{i(1-\frac{N+1}{2})\pi cos(\theta_{K})}&\ldots&e^{i(N-\frac{N+1}{2})\pi cos(\theta_{K})}\end{bmatrix}. (2) We then can denote the orthogonality constraint, as presented in [ 7 ] , as \mathbf{H}(\theta_{k}=\theta_{target})^{*}\Delta\vec{G}=0~. (3) We can now note the primary difference between conventional and real-valued phase DM. Conventional DM systems, such as those defined in [ 6 , 4 ] constrain the phase of the complex gain coefficient to three values \phi_{n}=[-\pi/2,0,\pi/2] . Whereas in the real-valued phase DM framework, we denote \phi_{n} as a random variable drawn from a beta distribution in the interval \phi_{n}\in[-\pi/2,\pi/2] , that is \phi_{n}\sim\frac{\pi}{2}[\mathcal{B}\rm{e}(\alpha=\beta)-.5] . We present the coefficient determination