Electro-mechanically tunable, waveguide-coupled photonic-crystal cavities with embedded quantum dots
L. A. F. Brunswick, L. Hallacy, R. Dost, E. Clarke, M. S. Skolnick, L. R. Wilson · 2025
Read Electro-mechanically tunable, waveguide-coupled photonic-crystal cavities with embedded quantum dots by L. A. F. Brunswick, L. Hallacy, R. Dost, E. Clarke, M. S. Skolnick, L. R. Wilson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-09482.txt.
Introduction
Quantum dots trapped in light cavities are building blocks for quantum machines, but factory flaws leave each device slightly off tune. Luke Brunswick and co-authors build a fully tunable version of such a device in a 2025 paper.
The cavity is a one-dimensional crystal of holes etched in a chip, with a quantum dot inside. A tiny cantilever bends to shift the cavity's color, while voltage shifts the dot's glow through a known field effect. Together they brought dot and cavity into resonance, speeding the dot's emission. The signal exits through a shared waveguide, the layout needed to chain many cavities on one chip. The tuning range covered the spread that fabrication flaws typically cause.
Catalog record
| CREATOR | L. A. F. Brunswick, L. Hallacy, R. Dost, E. Clarke, M. S. Skolnick, L. R. Wilson |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-09482
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Electro-mechanically tunable, waveguide-coupled photonic-crystal cavities with embedded quantum dots L. A. F. Brunswick, L. Hallacy, R. Dost, E. Clarke, M. S. Skolnick, L. R. Wilson Abstract On-chip micro-cavities with embedded quantum emitters provide an excellent platform for high-performance quantum technologies. A major difficulty for such devices is overcoming the detrimental effects of fluctuations in the device dimensions caused by the limitations of the fabrication processes. We present a fully tunable system based on a 1D photonic-crystal cavity with an embedded quantum dot, which enables tuning of both the quantum dot emission energy and the cavity mode wavelength. A micro-electromechanical cantilever is used to tune the cavity mode wavelength via index modulation and the quantum-confined Stark effect is used to tune the quantum dot emission energy, mitigating the effect of fabrication imperfections. To demonstrate the operation of the device, a maximum, voltage-controllable cavity tuning range of Δ λ = 1.8 \Delta\lambda=1.8 nm is observed. This signal is measured at the end of a bus waveguide which side-couples to the cavity, enabling the coupling of multiple cavities to a common waveguide, a key requirement for scale-up in these systems. Additionally, a quantum dot is tuned into resonance with the cavity mode, exhibiting an enhanced emission rate with a resolution limited Purcell factor of F P = 3.5 F_{P}=3.5 . keywords Quantum dots, Nanophotonics, Purcell effect, Photonic resonators, Micro-electromechanical systems, Full tunablility † † affiliation: School of Mathematical and Physical Sciences, University of Sheffield, UK † † email: [email protected] † † affiliation: School of Mathematical and Physical Sciences, University of Sheffield, UK † † affiliation: School of Mathematical and Physical Sciences, University of Sheffield, UK † † affiliation: School of Electrical and Electronic Engineering, University of Sheffield, UK † † affiliation: School of Mathematical and Physical Sciences, University of Sheffield, UK † † affiliation: School of Mathematical and Physical Sciences, University of Sheffield, UK † † suppinfo: \mciteErrorOnUnknownfalse 1 Introduction Semiconductor quantum dots (QDs) embedded in nanostructures have been an active field of research for the past two decades, during which significant progress has been made towards the realisation of quantum technologies based on this architecture. Demonstrations of key properties such as transform-limited emitter linewidths Kuhlmann et al. 2015 ; Pedersen et al. 2020 , highly indistinguishable single-photon emission Somaschi et al. 2016 ; Ding et al. 2016 , strong light-matter interactions Liu et al. 2018 ; Mahmoodian et al. 2017 ; Laucht et al. 2012 ; Javadi et al. 2015 ; Yoshie et al. 2004 and highly efficient, deterministic single-photon generation Tomm et al. 2021 ; Senellart et al. 2017 have established QDs as a leading single-photon source for quantum technology applications. Embedding QDs in optical resonators such as micro-cavities enhances many of their favourable properties due to the enhanced light-matter interaction that arises from coupling between the QD and the cavity when they are in resonance. In the weak-coupling regime, this enhancement is known as the Purcell effect Purcell 1946 which manifests itself as a reduction in the radiative lifetime of the QD Englund et al. 2005 . This phenomenon not only increases the emission rate of single-photons from the QD, but also reduces the sensitivity to losses caused by decoherence or non-radiative recombination Arcari et al. 2014 , which is critical to achieve high performance devices based on single quantum emitters. To enhance the light-matter interactions of a QD in a micro-cavity, the QD emission must be in resonance with the optical mode of the cavity. This requirement poses a significant challenge for semiconductor QD systems as, due to the random nature of QD growth and fluctuations in fabrication Fussell et al. 2008 ; García et al. 2013 , it is unlikely that a QD that is located in a cavity will be on resonance with the mode of the cavity. To grow QDs with high-quality optical characteristics the Stranski–Krastanov method is often used, which nucleates QDs in random positions on the substrate, and of random sizes, resulting in a distribution of emission energies Rastelli et al. 2009 . Furthermore, fabrication imperfections can cause nanostructure dimensions to deviate from their design, leading to significant detuning of the optical modes from their intended wavelength. Consequently, a method to independently control both the QD emission energy and the cavity resonance is highly desirable to maximise the yield of these devices. The tuning of QD emission energies is a well-established technique in the field and can be achieved through several different, complementary methods such as electrical tuning via the quantum-confined Stark effect Bennett et al. 2010 , strain tuning, Ding et al. 2010 ; Bonato et al. 2011 ; Seidl et al. 2006 ; Grim et al. 2019 magnetic field tuning Stevenson et al. 2006 and temperature tuning Englund et al. 2007 . When considering cavity tuning methods, they can be split broadly into two categories: material or mode perturbation. Material perturbation methods influence the whole cavity/emitter system by altering the physical properties of the structure. Examples of material perturbation tuning methods include thermal Xu et al. 2017 ; Pan et al. 2008 , electro-optical Midolo et al. 2017 , acoustic Tadesse and Li 2014 and strain Luxmoore et al. 2012 ; Luxmoore et al. 2011 . However, these approaches cannot independently tune the QDs relative to the cavity mode. Mode perturbation tuning methods modulate the effective refractive index of the cavity mode by using an electromechanical device to control the displacement of a dielectric material within the evanescent field of the cavity mode. This approach has the advantage of preserving the optical properties of the QD while enabling independent control of the cavity mode wavelength. Moreover, such an interaction is inherently local to a single cavity, a key requirement for a scaleable cavity emitter system. Such devices have seen success in silicon Chew et al. 2011 ; Koenderink et al. 2005 ; Chew et al. 2010 ; Deotare et al. 2013 ; Lin et al. 2015 ; Wu et al. 2018 ; Wang et al. 2019 , diamond - AlN hybrid Mouradian and Englund 2017 and, more recently, in GaAs Zhou et al. 2020 ; Petruzzella et al. 2015 ; Petruzzella et al. 2018 ; Qvotrup et al. systems. Actuation can occur in either in-plane or out-of-plane geometries. In-plane actuation requires intricate comb drives, which are complex to fabricate, occupy a large footprint and typically require moderate voltages on the order of 10 V to operate Qvotrup et al. . Out-of-plane systems on the other hand, rely on the electrostatic attraction between layers of the wafer to displace the material, simplifying fabrication and reducing device size. In the present work we embed InAs QDs in a 1D-photonic-crystal cavity (PhCC) where the electric field maximum is located in the high index material. Additionally, a perturbing beam is mounted on a singly clamped cantilever to tune the cavity. This geometry brings two key benefits relative to previous reports in GaAs systems. Firstly, 1D-PhCCs possess intrinsically low mode volumes, on the order of \frac{1}{2}(\frac{\lambda}{n})^{3} Deotare et al. 2009 , providing a favourable environment for strong light-matter interactions. Secondly, the evanescent field of the cavity mode is easily accessible in a side-coupled geometry from both sides of the cavity Afzal et al. 2019 allowing for