Explainable Autoencoder Design for RSSI-Based Multi-User Beam Probing and Hybrid Precoding

Asmaa Abdallah, , Abdulkadir Celik, , Ahmed Alkhateeb, , and Ahmed M. Eltawil · 2025

Read Explainable Autoencoder Design for RSSI-Based Multi-User Beam Probing and Hybrid Precoding by Asmaa Abdallah, , Abdulkadir Celik, , Ahmed Alkhateeb, , and Ahmed M. Eltawil (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-08267.txt.

Introduction

Asmaa Abdallah, Ahmed Eltawil, and co-authors train a clear auto coder to probe beams and set mix beams for fast wave links, in a 2025 paper. Such links need keen beam aim but can spare just few test chirps. Past beams waste probe strength on dead zones in the room.

Their coder learns from past room reads to aim probes at hot zones. It then calls free beam forms from few strength reads with no set code book. End to end train runs with no hand marks and a strength max loss. Code size at the neck is checked by math to keep reads rich.

Catalog record

CREATORAsmaa Abdallah, , Abdulkadir Celik, , Ahmed Alkhateeb, , and Ahmed M. Eltawil
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE73 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-08267

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Explainable Autoencoder Design for RSSI-Based Multi-User Beam Probing and Hybrid Precoding Asmaa Abdallah, , Abdulkadir Celik, , Ahmed Alkhateeb, , and Ahmed M. Eltawil Abstract This paper introduces a novel neural network (NN) structure referred to as an “Auto-hybrid precoder” (Auto-HP) and an unsupervised deep learning (DL) approach that jointly designs millimeter wave probing beams and hybrid precoding matrix design for mmWave multi-user communication system with minimal training pilots. Our learning-based model capitalizes on prior channel observations to achieve two primary goals: designing a limited set of probing beams and predicting off-grid radio frequency beamforming vectors. The Auto-HP framework optimizes the probing beams in an unsupervised manner, concentrating the sensing power on the most promising spatial directions based on the surrounding environment. This is achieved through an innovative neural network architecture that respects radio frequency chain constraints and models received signal strength power measurements using complex-valued convolutional layers. Then, the autoencoder is trained to directly produce RF beamforming vectors for hybrid architectures, unconstrained by a predefined codebook, based on few projected received signal strength indicators (RSSIs). Finally, once the RF beamforming vectors for the multi-users are predicted, the baseband (BB) digital precoders are designed accounting for the multi-user interference. The Auto-HP neural network is trained end-to-end (E2E) in an unsupervised learning manner with a customized loss function that aims to maximizes the received signal strength. The adequacy of the Auto-HP NN’s bottleneck layer dimension is evaluated from an information theory perspective, ensuring maximum data compression and reliable RF beam predictions. The proposed algorithm leverages mutual information (MI) and entropy evolution during Auto-HP training, reducing training overhead significantly. In a system with 64 antennas, 4 RF chains, and 4 users, our solution requires only 8 training pilots to predict RF beamforming/combining vectors directly, and achieve near-optimal data rates. I Introduction Millimeter-wave (mmWave) devices necessitate precise beamforming to address substantial isotropic path loss and ensure sufficient signal strength. Analog beams are commonly utilized in practical mmWave systems to minimize costs and power consumption, directing energy toward specific angles. However, selecting the optimal focused beams is highly sensitive to the variations in the propagation environment, including blockages and reflections. For both base stations (BSs) and user equipments (UEs), it is essential to identify effective beamforming directions during initial connection and subsequently track these beams amidst variations in propagation conditions, such as UE movements and rotations. As cellular systems advance to wider bandwidths and higher carrier frequencies, including the ”sub-terahertz (THz)” bands reaching up to 300 GHz, devices will incorporate increasingly dense antenna arrays and narrower beams. Consequently, beam management, encompassing the discovery and maintenance of optimal beamforming directions, emerges as a formidable challenge, particularly as we advance towards 6G and beyond. Currently, there are primarily two types of beamforming techniques: 1. Channel state information (CSI) based beamforming techniques : The initial phase of CSI-based beamforming involves the estimation of channel state information, typically conducted through the transmission of pilot signals. Following channel estimation, UEs in the downlink scenario commonly feed back this information back to the BS. Finally, with the knowledge of the channel state, the BS uses complex optimization based beamforming algorithms to design the beamforming vectors or matrices [ 1 , 2 , 3 , 4 , 5 , 6 , 7 ] . 2. Beam sweeping-based techniques : In massive multiple-input multiple-output (MIMO) systems, acquiring perfect CSI presents challenges owing to limitations in signaling overhead. To overcome this challenge, beamforming codebooks offer a viable solution. During the initial access phase, synchronization bursts contain a subset of beams that the BS typically scans. Subsequently, UEs report back to the BS the index of the beam with the strongest received power. By leveraging beam codebooks, MIMO systems can reduce the overhead associated with channel training while maximizing received signal strengths. It is worth noting that the efficiency of training through beam sweeping is intricately tied to the beam codebook’s design. The current implementation of 5G integrates a beam alignment framework that focuses on beam sweeping, measurements, and reporting [ 8 , 9 , 10 ] . As illustrated in Fig. 1 , in the downlink, the BS employs synchronization signal blocks (SSBs) for sweeping wide probing beams selected from codebooks with quantized beam directions and more flexible CSI reference signals (CSI-RSs) for refining narrow beams. The UE monitors the received signal power, uses either a quasi-omnidirectional beam or sweeps its beam codebook with different receiving beams, and then communicates the received signal measurements back to the BS. Quantized beams generally distribute energy evenly across angular space, commonly employing on-grid codebooks such as discrete Fourier transform (DFT) and oversampled-DFT (O-DFT) codebooks to ensure coverage across any location. One major issue of the on-grid methods is the “grid mismatch”, where the predefined beams may not align perfectly with the actual channel conditions, leading to suboptimal performance. SSBs are transmitted periodically and serve various purposes, including cell discovery and initial access (IA) for new UEs. To synchronize before connecting to the network, an unconnected UE must measure the SSBs from the Base Station (BS), identify one with a favorable beam, and extract the necessary information. The prominence of beam sweeping in both beam alignment and cell discovery suggests that future releases of 5G will continue to utilize beam sweeping-based frameworks. However, a significant drawback of exhaustive search is the linear increase in beam sweeping latency with the total number of beams and antennas deployed. As systems progress to higher frequencies and adopt more antennas with narrower beams, the codebook size increases accordingly, leading to substantial overhead and latency in beam sweeping. In a THz system, the exhaustive search may involve tens of thousands of beam pairs due to the extremely large antenna arrays [ 11 ] , rendering it impractical due to the associated prohibitive beam sweeping latency. Moreover, while probing beams discover or update channel characteristics by sending pilot signals to gather information on how the channel behaves, precoding beam design utilizes beam probing to enhance system performance by effectively managing the transmission beams towards intended UEs. The BS can determine which directions offer the best signal paths based on the UE feedback by probing the channel with beams directed in multiple orientations. This directional information is key to constructing or updating the precoding matrix, which consists of beamforming vectors tailored to maximize energy toward intended users while nullifying it toward unintended UEs or interferers. Figure 1 : Beam alignment classical procedure, where N_{\mathrm{BS}} is the number of antennas at BS and O_{\mathrm{BS}} is the oversampling factor. I-A Related Work CSI-Based Beamforming Techniques: Unlike predefined codebook-based beam management techniques, where the beamforming gain is confined by the granularity of the codebook, a grid-free strategy expands the exploration scope for the optimal beam into a high-dimensional continuous space, theoretically achieving superior gain. For example, singular-value decomposition (SVD) based beamforming, maximum ratio transmission (MRT), and equal gain transmission (EGT) are considered as efficient beamforming techniques under a unit power constraint. However, these methods necessitate complete CSI for computing beamforming weights, a challenge as CSI is typically unavailable before beam alignment. Moreover, even with CSI, determining the optimal SVD and equal gain combining (EGC) beams in a MIMO setup entails a grid search over potential weights, rendering

Read the complete text