TelePix2 : Full scale fast region of interest trigger and timing for the EUDET-style telescopes at the DESY II Test Beam Facility Journal: Nuclear Instruments and Methods A

L. Huth, H. Augustin, L. Dittmann, S. Dittmeier, J. Hammerich, Y. He, A. Herkert, D. Kim, U. Krämer, D. M. Immig, R. Kolb, I. Perić, B. Pilsl, T. Senger, S. Ruiz Daza, A. Schöning, M. Stanitzki, B. Weinläder, A. Wintle · 2025

Read TelePix2 : Full scale fast region of interest trigger and timing for the EUDET-style telescopes at the DESY II Test Beam Facility Journal: Nuclear Instruments and Methods A by L. Huth, H. Augustin, L. Dittmann, S. Dittmeier, J. Hammerich, Y. He, A. Herkert, D. Kim, U. Krämer, D. M. Immig, R. Kolb, I. Perić, B. Pilsl, T. Senger, S. Ruiz Daza, A. Schöning, M. Stanitzki, B. Weinläder, A. Wintle (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-08177.txt.

Introduction

Lennart Huth and co-authors describe in 2025 a new sensor layer for the test beam telescopes at a German physics lab. Test beams let teams try out particle detectors before real experiments. The existing telescopes track particles well but read out slowly, so several particles can blur into one trigger and small test devices are easy to miss.

The new chip, TelePix2, adds fast timing and a flexible trigger that watches a chosen region of interest. It is a full-size version of an earlier small prototype. Tests show detection rates above 99 percent and timing sharp to about four nanoseconds. The paper also covers how the chip plugs into the standard data system and analysis chain at the facility. First real uses at the test beam are reported as a success.

Catalog record

CREATORL. Huth, H. Augustin, L. Dittmann, S. Dittmeier, J. Hammerich, Y. He, A. Herkert, D. Kim, U. Krämer, D. M. Immig, R. Kolb, I. Perić, B. Pilsl, T. Senger, S. Ruiz Daza, A. Schöning, M. Stanitzki, B. Weinläder, A. Wintle
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-08177

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

TelePix2 : Full scale fast region of interest trigger and timing for the EUDET-style telescopes at the DESY II Test Beam Facility Journal: Nuclear Instruments and Methods A L. Huth, H. Augustin, L. Dittmann, S. Dittmeier, J. Hammerich, Y. He, A. Herkert, D. Kim, U. Krämer, D. M. Immig, R. Kolb, I. Perić, B. Pilsl, T. Senger, S. Ruiz Daza, A. Schöning, M. Stanitzki, B. Weinläder, A. Wintle Abstract With increasing demands by future and current upgrades of particle physics experiments on rate capabilities and time resolution, the requirements on test beams are also increasing. The current infrastructure at the DESY II test beam facility includes particle tracking telescopes with long integration times, no additional timing but excellent spatial resolution. This results in readouts with multiple particles per trigger, causing ambiguities in tracking and assigning particles to triggers. Also, it is likely not to trigger on particles that pass through a small device under test, leading to inefficient data taking. These issues can be solved by adding TelePix2 as a timing and flexible region of interest trigger layer. TelePix2 is a full scale HV-CMOS chip based on the successful small scale prototype TelePix . The DAQ system and the sensors performance featuring efficiencies above 99 % 99\text{\,}\mathrm{\%} and a time resolution of 3.844 ​ ( ± 0.002 ) ns 3.844(\pm 0.002)\text{\,}\mathrm{n}\mathrm{s} are presented. The integration into EUDAQ2 and the AIDA-TLU to seamlessly work in the test beam environment as well as into the analysis chain is described. First successful use cases are highlighted to conclude that TelePix2 is a well-suited timing and trigger layer for test beams. 1 Introduction Developing new detectors for particle physics experiments is crucial improving the understanding of fundamental forces and interactions. Characterisation of novel detectors under conditions as close as possible to the final experiment can be done at test beams, where minimum ionizing particles are provided for tests. Precise reference systems - so-called beam telescopes - are used to tag the spatial and temporal presence of a particle. DESY hosts a test beam facility [ 1 ] at the DESY II accelerator with three independent beamlines of which two are equipped with EUDET-style beam telescopes [ 2 ] , based on MINMOSA-26 sensors [ 3 , 4 ] with an active area of approximately 2x1\text{\,}\mathrm{c}\mathrm{m}\mathrm{{}^{2}} . Copies of these telescopes can also be found at CERN. These telescopes have an integration time of up to 230\text{\,}\mathrm{\SIUnitSymbolMicro s} , no time-stamping and are read out in externally triggered rolling shutter mode. The telescope is fully integrated with EUDAQ2 [ 5 ] and the AIDA-TLU [ 6 ] , allowing users to integrate devices under test (DUT) with minimal effort. Under typical operation conditions, up to 6 electrons pass the telescope in a single readout frame. This causes ambiguities in track reconstruction. In addition, it is likely not to trigger the particle passing through potentially small DUTs, which results in inefficient data taking. A pixelated timing layer with a configurable trigger region resolves both issues by assigning a timestamp to each particle passing the telescope and only triggering the telescope readout if the selected region is hit. Previously used hybrid approaches [ 7 ] have reduced timing capabilities, are operated in 40\text{\,}\mathrm{M}\mathrm{H}\mathrm{z} LHC-like readouts and add significant material. The time resolution of a suitable layer has to be below 1\text{\,}\mathrm{\SIUnitSymbolMicro s} to be able to discriminate particles coming from different circulations of the primary beam and below 5\text{\,}\mathrm{n}\mathrm{s} to provide insight into the timing for LHC like detectors. The active area should correspond to the telescope’s active area. TelePix2 is the successor of a small-scale prototype TelePix [ 8 ] , that already fulfilled all requirements except for the size. 2 TelePix2 TelePix2 is a system-on-chip pixel detector produced in a 180\text{\,}\mathrm{n}\mathrm{m} HV-CMOS process and based on the developments within the Mu3e and ATLAS context [ 9 , 10 ] . It has an active area of 2\times 1\text{\,}\mathrm{c}\mathrm{m}\mathrm{{}^{2}} to match the active area of the MIMOSA-26 chips. The matrix consists of 120\times 400\text{\,}\mathrm{p}\mathrm{i}\mathrm{x}\mathrm{e}\mathrm{l}\mathrm{s} with a pitch of 165\times 25\text{\,}\mathrm{\SIUnitSymbolMicro} . The chip consists of repeated columns, where one column has 400 pixels point-to-point connected to 400 hit digitizers and end-of-column multiplexer. Each pixel can store a 20-bit time stamp as well as a 10-bit time-over-threshold. Hit data is streamed zero suppressed via a differential link to the readout system typically running at 1.25\text{\,}\mathrm{G}\mathrm{b}\mathrm{i}\mathrm{t}\mathrm{/}\mathrm{s} . The chip periphery additionally hosts a readout control unit, a clock generator based on a phase-locked loop, configuration registers, DACs and IO pads. TelePix2 is implemented on a p-type Czochralski substrate with resistivity in the range 200-400\text{\,}\Omega\mathrm{c}\mathrm{m} instead of the standard wafer to enhance the depleted region and hence charge collection. A pixel diode is formed by a deep n-well implant which is reversely biased towards the substrate. The pixel is designed to have a breakdown voltage of about 120 V. The used technology offers 7 metal layers, with a thick top metal layer used for the distribution of power and time-critical signals. The active pixel matrix extends to three die borders making the chip three-side abuttable. All configuration register cells are triple redundant and followed by majority logic making it tolerant to single-bit flips caused by ionization (single-event upset). The cells have an auto-refresh feature to allow for the automated repair of single-event upsets. These registers store settings for the DACs that generate bias-, threshold-, baseline- and injection voltages. Pixel Cell The main parts of the active pixel cell are the sensor diode - implemented as a large fill factor n-well electrode, the AC-coupled charge sensitive amplifier (CSA) and the comparator. The negative signal charge is collected by the n-well and amplified by an inverting CSA. No pixel reset is required since the feedback capacitor (p+ diffusion to n-well capacitance of the node AmpOut in Figure 1 ) of the amplifier is continuously discharged. The comparator compares the positive amplifier output signal to a threshold, which is adjustable via a 3-bit differential current-steering DAC, that is stored in an SRAM cell. The comparator output signals are transmitted to the hit digitizers at the bottom of the chip using long signal lines. An additional test signal circuit allows the injection of a defined charge into the n-well by discharging a metal-metal capacitor enabling electrical tests without ionizing particles. It is produced at the chip periphery, its amplitude can be varied by an on-chip DAC with 8 bits. The test signal is distributed to all pixels but can be enabled/disabled per pixel. The block diagram of the pixel is shown in figure 1 . Figure 1 : Schematic drawing of the in-pixel functionality Hit Digitization The in-pixel discriminator signal is transmitted to the hit digitizers, where the rising edge is sampled with a 19-bit Gray counter running at the rising reference clock (typically 125\text{\,}\mathrm{M}\mathrm{H}\mathrm{z} ) edge together with a falling clock edge 1-bit counter, allowing for time stamping with twice the clock speed. An additional 10-bit time stamp samples the threshold crossing of the falling signal edge to determine the time-over-threshold. Additionally, the address of the hit is generated. The layout of the hit digitizer is full custom and has an area of 165x4.2\text{\,}{\mathrm{\SIUnitSymbolMicro m}}^{2} . Digital Periphery The readout process is

Read the complete text