Active magneto-mechanical metamaterial with the wave transmission and Poisson’s ratio controlled via the magnetic field

Krzysztof K. Dudek, J. A. Iglesias Martínez, L. Hirsinger, M. Kadic, M. Devel · 2025

Read Active magneto-mechanical metamaterial with the wave transmission and Poisson’s ratio controlled via the magnetic field by Krzysztof K. Dudek, J. A. Iglesias Martínez, L. Hirsinger, M. Kadic, M. Devel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-07887.txt.

Introduction

Krzysztof Dudek and co-authors design a material whose stiffness and sound channels answer to a magnet held nearby. Active metamaterials that reconfigure on command usually stop at shape or statics. Their 2025 magneto-mechanical lattice goes further, tying wave propagation to the same remote control.

Turning the external field's strength and direction reconfigures the structure step by step. Along the way its Poisson's ratio sweeps from strongly auxetic — widening when stretched — through zero to ordinary positive values. The sound band structure moves with it, opening complete band gaps at different frequency ranges for each configuration. One lattice thus serves as several filters and several materials. Engineers get remote, reversible tuning of both mechanics and acoustics in a single device.

Catalog record

CREATORKrzysztof K. Dudek, J. A. Iglesias Martínez, L. Hirsinger, M. Kadic, M. Devel
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE41 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-07887

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Active magneto-mechanical metamaterial with the wave transmission and Poisson’s ratio controlled via the magnetic field Krzysztof K. Dudek, J. A. Iglesias Martínez, L. Hirsinger, M. Kadic, M. Devel Abstract In recent years, there has been a notable increase in the significance of active mechanical metamaterials capable of being remotely manipulated through changes in external stimuli. While research in this area has achieved considerable success in controlling reconfiguration to induce shape morphing or alter static mechanical properties, the active control of wave propagation within these systems remains largely unexplored. In this study, we propose a magneto-mechanical metamaterial that can be entirely governed by adjusting the magnitude and direction of an external magnetic field. We demonstrate that such a system offers remote control over its Poisson’s ratio, allowing for transitions from strongly auxetic to positive Poisson’s ratio configurations. Additionally, our system enables manipulation of the phononic band structure, facilitating the formation of complete band gaps across different frequency ranges depending on the stage of the magnetically guided reconfiguration process. The potential for achieving such active control over the properties and behavior of these materials holds great promise for various applications, including robotics and smart vibration dampers that can be remotely controlled. 1 Introduction Mechanical metamaterials [ 1 , 2 , 3 , 4 , 5 , 6 ] are a class of structures capable of exhibiting counterintuitive mechanical properties thanks to their rational design. Over the years, such systems have been thoroughly investigated from the perspective of their ability to exhibit properties such as negative Poisson’s ratio [ 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 ] , negative stiffness [ 17 , 18 , 19 , 20 ] , or high energy absorption [ 21 , 22 , 23 , 24 , 25 , 26 ] that have proven to be of great significance in the case of applications ranging from biomedical [ 27 , 28 ] to soundproofing devices [ 29 , 30 , 31 , 32 , 33 ] . Despite their numerous advantages, standard mechanical metamaterials typically share one limitation. Namely, once they are fabricated, it is very challenging to modify their properties. To do this, it is typically required to refabricate the system while implementing a different design. This, in turn, significantly reduces the applicability of such structures since they cannot be continuously used without sacrificing their efficiency. The solution to this problem turned out to be active mechanical metamaterials, i.e. structures that can undergo changes in their mechanical properties and deformation pattern based on the variation in the external stimulus. In recent years, it has been shown that it is possible to design metamaterials that can be controlled via temperature [ 34 , 35 , 36 , 37 , 38 ] , magnetic field [ 39 , 40 , 41 , 42 , 43 , 44 ] , light [ 45 ] , and other stimuli [ 46 ] . This concept is very promising since it allows to achieve the fully programmable and remote control over the behavior of a metamaterial not only without the need of refabricating it but also without being in direct contact with the system. The latter is particularly important in the case of applications related to microrobotics [ 41 , 47 , 48 ] , where due to a small scale it is not possible to influence the deformation of the structure through direct physical manipulation. In the studies focused on active mechanical metamaterials it was shown that through the appropriate composite design, it is possible to almost arbitrarily adjust the response of the system depending on a change in the external stimuli. One of the main directions of studies related to stimuli-responsive systems is their shape-morphing ability [ 41 , 46 ] which is very useful in the case of multiscale robotics. Active metamaterials can also change their static mechanical properties such as the Poisson’s ratio [ 42 , 49 , 50 ] or stiffness [ 51 , 52 ] . In fact, in recent studies [ 42 , 49 , 50 ] , it has been demonstrated that based on the changes in the external magnetic field, metamaterials can undergo a remotely controlled transition from a strongly auxetic to a nonauxetic configuration. This offers a considerable advantage over many standard auxetic metamaterials, where such a change in the properties of the system requires its refabrication. Another important avenue pursued by researchers working on active mechanical metamaterials is the possibility of controlling the phononic band structure and the transmission of waves through the system. In fact, over the years, there have been multiple studies reported, where it was shown that through the application of the external stimulus such as a change in the external magnetic field, it is possible to change the phononic band structure of the system [ 53 , 54 , 55 , 56 , 57 , 58 , 59 ] . This goal had been achieved amongst others through the use of soft magnetoactive laminates [ 57 , 58 ] and structures, where internal components exhibit the reorientation due to the presence of the external field [ 55 ] . However, it is much more difficult to find studies reporting the possibility of achieving simultaneous control over wave transmission through the system as well as its Poisson’s ratio. Notably, such attempts have been made but usually, the high level of control over one aspect of the behavior of the system comes at the expense of another [ 49 , 59 ] . It becomes even more challenging when the mechanical reconfiguration caused by the application of the external magnetic field is expected to cause a large reconfiguration leading to a very considerable change in the volume of the system. This, in turn, is essential to benefit from the controllable Poisson’s ratio in the case of many applications in engineering. Hence, the main objective of this work is to address these challenges. In this work, we propose a novel magneto-mechanical active metamaterial having its reconfiguration process controlled via the external magnetic field. We show that through changes in the orientation of such stimulus, the structure can follow very different deformation patterns that also correspond to very different values of Poisson’s ratio with the concurrent large changes in its volume. In addition to changes in the static mechanical properties, we also show that programmable changes in the configuration of the system can at the same time lead to significant differences in the phononic band structure including the appearance of complete phononic band gaps. 2 Concept The main objective of this work is to construct a magneto-mechanical metamaterial capable of exhibiting a versatile mechanical behavior based on the changes in the external magnetic field. To this aim, the behavior of the system should be controlled both by the magnitude and direction of the external field. More specifically, changes in the magnitude of the external stimulus are expected to guide the reconfiguration process so that the structure can follow a specific deformation pattern. On the other hand, a change in the direction of the external field is expected to result in a new deformation profile that is different from

Read the complete text