Tuning the Size and Stiffness of Inflatable Particles

Nidhi Pashine, Dong Wang, Robert Baines, Medha Goyal, Mark D. Shattuck, Corey S. O’Hern, Rebecca Kramer-Bottiglio · 2025

Read Tuning the Size and Stiffness of Inflatable Particles by Nidhi Pashine, Dong Wang, Robert Baines, Medha Goyal, Mark D. Shattuck, Corey S. O’Hern, Rebecca Kramer-Bottiglio (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-07850.txt.

Introduction

Nidhi Pashine and six co-authors describe soft particles that change size and stiffness when inflated, in a 2025 paper. The particles are silicone tubes that could serve as grains in robot materials. Blowing them up grows their size, but stiffness under squeeze may rise or fall. Which way it goes hinges on shape details the team set out to map.

Two shape traits matter most, above all the ratio of corner curve to wall depth. Tests and computer models agreed on the split. Particles only soften on inflation when strain piles up in one spot, which happens as that ratio nears zero. The work gives design rules for grains that tune how a robot body feels and moves.

Catalog record

CREATORNidhi Pashine, Dong Wang, Robert Baines, Medha Goyal, Mark D. Shattuck, Corey S. O’Hern, Rebecca Kramer-Bottiglio
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-07850

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tuning the Size and Stiffness of Inflatable Particles Preprint: APS/123-QED Nidhi Pashine, Dong Wang, Robert Baines, Medha Goyal, Mark D. Shattuck, Corey S. O’Hern, Rebecca Kramer-Bottiglio Abstract We describe size-varying cylindrical particles made from silicone elastomers that can serve as building blocks for robotic granular materials. The particle size variation, which is achieved by inflation, gives rise to changes in stiffness under compression. We design and fabricate inflatable particles that can become stiffer or softer during inflation, depending on key parameters of the particle geometry, such as the ratio of the fillet radius to the wall thickness, r / t r/t . We also conduct numerical simulations of the inflatable particles and show that they only soften during inflation when localization of large strains occurs in the regime r / t → 0 r/t\rightarrow 0 . This work introduces novel particle systems with tunable size and stiffness that can be implemented in numerous soft robotic applications. I Introduction Granular materials composed of discrete frictional particles possess a host of complex yet tunable mechanical properties that have been the subject of study for decades Behringer 2015 ; Liu and Nagel 2010 ; Behringer and Chakraborty 2018 . Granular metamaterials can be designed to exhibit targeted mechanical responses, such as phononic band gaps and the ability to propagate solitons and edge modes Zhang et al. 2023 ; Gaspar 2010 ; Miskin and Jaeger 2013 . Although granular metamaterials are typically composed of homogeneous particles with identical properties Pashine et al. 2023 ; Fu et al. 2019 ; Haver et al. 2024 ; Kocharyan and Karanjgaokar 2023 , recent work has realized granular metamaterials where properties of individual particles can be varied, unlocking further functionality Parsa et al. 2022 ; Wu et al. 2019 . To maximize the tunability of granular metamaterials, we need a diverse range of particles capable of dynamically varying properties such as size, shape, and stiffness within a granular packing. In this work, we design and fabricate inflatable particles with tunable size and stiffness, which can form the basis for future studies of robotic granular materials. Tuning the individual particle properties in a robotic granular packing could provide control over the interparticle contact network, which will enable the programming of the global mechanical properties of the packings. Previous studies have incorporated changes in particle stiffness and actuation Li et al. 2025 . A unique contribution of the current work is the ability to control the stiffness-inflation pressure relationship of an inflatable particle. Specifically, we can control whether the particle’s compressive stiffness increases or decreases with volumetric strain by adjusting key geometric parameters, which allows the particles to either stiffen or soften during inflation. This study focuses on two types of inflatable cylindrical particles: type I: cylindrical shells and type II: toroidal shells. Type I particles are empty inside and expand radially, as well as along the cylindrical axis of the particle, when inflated. In contrast, type II particles mostly expand radially, with minimal deformation along the cylindrical axis. Images of the two particle types are shown in Fig. 1 . We limit the expansion of type II particles along the cylindrical axis by connecting the top and bottom surfaces with a central pillar. The particle geometries are specified by several dimensionless ratios. In this work, we vary the shapes of both types of particles mainly by changing the ratio of the cylinder’s corner radius ( r in Fig. 1 ) to its thickness ( t in Fig. 1 ). We measure the force response as a function of pressure when these particles are compressed radially. Studying these two particle designs allows us to determine how the particle deformation during inflation affects its compressive stiffness. Figure 1: Schematic of the two types of particles (left) with images in the uninflated (middle) and inflated (right) states. Side views of (A) type I and (B) type II particles. (C) Top view of a type II particle. The type I and II particles have been inflated to \sim 3.4$\mathrm{kPa}$ and \sim 8.6$\mathrm{kPa}$ , respectively. All scale bars correspond to 10 mm. For both types of particles, we find that the compressive stiffness can increase, decrease, or stay the same during inflation. With finite element method simulations, we show that the slope of the stiffness versus inflation pressure curve is negative only when substantial strain localization occurs near the cylinder’s “corners” (where the top wall meets the side walls) during inflation, resulting in strain softening. We also demonstrate that the mode of particle deformation—whether cylindrical or radial—during inflation has little impact on stiffness variation, as both type I and type II particles exhibit similar stiffness behavior across different inflation pressures. These findings are used to design particles with specific variation of the compressive stiffness with inflation pressure, i.e. , increasing, decreasing, or constant stiffness. The remainder of the article is organized as follows. In Sec. II , we describe the manufacturing processes for type I and type II particles. We also describe the finite element method (FEM) simulations conducted to understand the compressive stiffness for type I particles during inflation. In Sec. III , we discuss experimental measurements of the particle stiffness versus the inflation pressure for type II particles. In Sec. IV , we summarize the conclusions and propose promising directions for future research. In Appendix A, we show the experimental results for the relation between the change in radius of type II particles and the inflation pressure. II Methods II.1 Particle Fabrication Figure 2: Summary of the particle fabrication process. Each type of particle requires two sets of molds: one for molding the two halves (mold A) and one for assembling the two halves together (mold B). The components of the molds are 3D-printed out of Polyvinyl Lactic Acid (PLA). The blue (green) molds are used for type I (type II) particles. The fabrication process for both particle types is nearly identical, except for the use of slightly different mold designs. The seven-step fabrication process for type II particles is shown. The particles (pink) are molded from EcoFlex™ 50. The inflatable particles are fabricated from EcoFlex™ 50, a two-part elastomer that reaches a 00-50 shore hardness upon curing. A schematic of the fabrication process is shown in Fig. 2 . The particles are molded as two halves and then attached to each other. The molds for each of the parts and for the final assembly are 3D-printed in PLA on a Prusa™ MK3S+ printer. The fabrication process involves first molding the top and bottom halves (mold A in Fig. 2 ) and then assembling the two parts using mold B in Fig. 2 to make the particle. During the molding process, a silicone tube is attached to the top part of the particle using Silpoxy™, which serves as an air inlet. After the two parts of the particle are cured, they are glued using a thin layer of uncured EcoFlex™ 50 and pressed in place using the second part of the mold. This particle assembly process ensures sufficient contact between the two particle layers so that leaks are avoided. The geometry of the uninflated type I particles is characterized by four dimensions: the height H , particle radius R , wall thickness

Read the complete text