For proceedings editors: Combining contributions using WS-procs961x669 master document in L a T e X 2e

First Author · 2025

Read For proceedings editors: Combining contributions using WS-procs961x669 master document in L a T e X 2e by First Author (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-06682.txt.

Introduction

Samik Mitra studies how gas falls into a spinning black hole. The catalog record for this work carries a wrong title, but the text itself is a physics proceeding on accretion flows. The flow studied here turns more slowly than a plain orbit would allow. That slow spin is what lets the gas reach the edge of the hole at all.

The flow stays close to the disk plane and holds still up and down. Magnetic fields run through it, both pointing out and around. Mitra maps a family of flow paths that cross sound speed more than once. He shows how the stored magnetic flux and the spin of the hole change the flow, and sketches the heat glow the disk would give off.

Catalog record

CREATORFirst Author
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE5 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-06682

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

For proceedings editors: Combining contributions using WS-procs961x669 master document in L a T e X 2e
First Author

Abstract
ws-procs961x669.tex is the master file to input all the papers from front matter, body and end matter files.



\wstoc

For proceedings editors: Combining contributions using
WS-procs961x669 master document in
\LaTeX
2eF. Author

Author, F.
\address
World Scientific Publishing Co, Production Department,

5 Toh Tuck Link, Singapore 596224,

E-mail: [email protected]

\keywords
Master file;
L
a
T
e
X
; Proceedings; World Scientific Publishing.

1
Master File

You can obtain these files from the following website:

\url
http://www.icpress.co.uk/authors/stylefiles.shtml#conference and

\url
http://www.worldscientific.com/page/authors/proceedings-stylefiles.
All the subdocuments are arranged in this master file in the
following sequence:
Ω\documentclass{ws-procs961x669}Ω\par\usepackage{ws-toc,ws-multind}Ω\makeindex{author} \par\begin{document}Ω\titlepages\inputpreface.texΩ\cleardoublepage\includeorganizers.texΩ\blankpage\mastertoc\include{proc1}Ω\include{proc2}Ω\include{proc3}Ω\blankpage\printindex{author}{AUTHOR INDEX} \end{document}Ω

2
Pagination

\parPages

i–iv are always the same and are prepared by the publisher. The pagination of the rest of the front matter depends on the length of the various sections (preface, organizing committee’s text, contents). Each front matter section should start on an odd right-hand page. The following is an example of proceedings pagination:
{romanlist}
[(iii)]
\itemFront
matter:

page i

—

half-title page, prepared by publisher

page ii

—

blank page

page iii

—

full-title page, prepared by publisher

page iv

—

copyright page, prepared by publisher

pages v–ix

—

preface text

page xi

—

organizing committees text

pages xiii–xx

—

contents text (TOC)

\parThe
first available front matter page is page v.

\itemBody
text:

odd page

—

First article, followed by remaining articles

\itemBack
matter (optional):

odd page

—

participants list

\parBack
matter text must start on an odd page.
\bfIf
the organization of the contributors’ manuscripts is different from the above pagination guidelines, please e-mail the respective desk-editor for advice.

\tbl

This table shows how the author names should appear in running head and TOC depending upon the number of authors contributing that paper.

\topruleNo
. of Authors

Author Names

\colrule
1

L. Hatcher

2

I. A. Pedrosa & I. Guedes

3

B. Feng, X. Gong & X. Wang

4 and more

S. R. Choudhury
\itet
al.

\botrule

{tabnote}
For TOC and Running Heads, the author names should appear in initial and surname format, e.g. LEE HATCHER should be abbreviated as L. HATCHER.

3
Running Head

\parPreparation

of the running head is optional. Each contribution must have
t the preamble to set the running head.
—

4
Master TOC

\parEach

contribution must have
\wstoc
#1#2— at the preamble to create the combined table of contents.
\wstoc
Article TitleAuthor’s Name—

5
Preparing the Individual Contributions for Combining

\parThe

following highlighted changes should be made in all the contributions provided by the individual contributors before including them in the master document.
Contribution provided by an Modified contribution, ready to individual contributor: get included in the master document: \par\documentclass{ws-procs961x669} \markboth{A. Author}{Paper title} \begin{document} \wstoc{Paper title}{A. Author} \title{PAPER TITLE} \title{Paper title} \author{A. AUTHOR} \author{A. Author} \aindx{Author, A.} \address{Institute of ...} \address{Institute of ...} \begin{abstract} \begin{abstract} We search for ... We search for ... \end{abstract} \end{abstract} \keywords{Keyword1; ...} \keywords{Keyword1; ...} \bodymatter\bodymatter\section{Introduction} \section{Introduction} String theory ... String theory ... \begin{thebibliography}{00} \begin{thebibliography}{00} \bibitem{t1} A. Sen, ... \bibitem{t1} A. Sen, ... \bibitem{t2} P. Horava, ... \bibitem{t2} P. Horava, ... ... ... \end{thebibliography} \end{thebibliography} \end{document} \vfill\pagebreak

6
Author Index

\parTocreate

an “author” index, the following declarations should be included in the master
T
e
X
file:
\makeindex{author} \printindex{author}{AUTHOR INDEX}

\parIntext

, the author index entries are marked with:
entry— or
\aindx
entry—

7
Compiling the Master File in
L
a
T
e
X
2e

\parTocompletethe

job, compile your file as follows:

[(4)]
\itemlatexws
-procs961x669
\itemlatexws
-procs961x669
\itembibtex
proc2
% Chapters using
\btex
database should

—
% be compiled individually in ‘bibtex’.

\itemmakeindexauthor

% author index

\itemlatexws
-procs961x669
\itemlatexws

Read the complete text