Comparative high-pressure structural and electrical transport properties study of thermoelectric (Bi 1-x Sb x ) 2 Te 3 compounds

Chenxin Wei, Dawod Muhamed, Wenting Lu, Haikai Zou, Baihong Sun, Shiyu Feng, Qian Zhang, Zegeng Su, Hirokazu Kadobayashi, Martin Kunz, Bihang Wang, Azkar, Saeed Ahmad, Yaron Amouya, Elissaios Stavrou · 2025

Read Comparative high-pressure structural and electrical transport properties study of thermoelectric (Bi 1-x Sb x ) 2 Te 3 compounds by Chenxin Wei, Dawod Muhamed, Wenting Lu, Haikai Zou, Baihong Sun, Shiyu Feng, Qian Zhang, Zegeng Su, Hirokazu Kadobayashi, Martin Kunz, Bihang Wang, Azkar, Saeed Ahmad, Yaron Amouya, Elissaios Stavrou (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-06562.txt.

Introduction

Chenxin Wei and co-authors squeeze a family of heat-to-power crystals in a diamond press and watch how their build and charge flow change. Their 2025 study varies the mix of two metals, bismuth and antimony, in a tellurium crystal. Three mixes were run up to high pressures at room heat.

X-ray reads showed all three shift through the same chain of forms as the pure end members. One shift, to a scrambled cubic phase, took more pressure the more antimony the mix held. One mix kept that phase stable to at least a huge pressure mark. Charge tests on that mix showed it turns metal-like past a set pressure, and flips back when the pressure lifts.

Catalog record

CREATORChenxin Wei, Dawod Muhamed, Wenting Lu, Haikai Zou, Baihong Sun, Shiyu Feng, Qian Zhang, Zegeng Su, Hirokazu Kadobayashi, Martin Kunz, Bihang Wang, Azkar, Saeed Ahmad, Yaron Amouya, Elissaios Stavrou
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-06562

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Comparative high-pressure structural and electrical transport properties study of thermoelectric (Bi 1-x Sb x ) 2 Te 3 compounds Chenxin Wei, Dawod Muhamed, Wenting Lu, Haikai Zou, Baihong Sun, Shiyu Feng, Qian Zhang, Zegeng Su, Hirokazu Kadobayashi, Martin Kunz, Bihang Wang, Azkar, Saeed Ahmad, Yaron Amouya, Elissaios Stavrou Abstract Thermoelectric (Bi 1-x Sb x ) 2 Te 3 (BST-x) compounds with x=0.2, 0.7 and 0.9 have been studied using synchrotron angle-dispersive powder x-ray diffraction in a diamond anvil cell up to 25 GPa (at room temperature). The results clearly indicate that all compounds of this study follow a similar structural evolution with the one of pure Bi 2 Te 3 and Sb 2 Te 3 under pressure. From the comparison between the critical pressures of the corresponding phase transitions, a clear trend of increasing critical pressure for the transition to the disordered solid-solution BCC phase was observed with the increase of Sb concentration. In the case of the BST-0.7, an extended stability of the solid-solution BCC phase up to, at least, 180 GPa was observed. Finally, electrical transport properties measurements under pressure for BST-0.7, document a reversible pressure-induced metallization above 12 GPa. keywords High-pressure, Thermoelectric materials, X-ray diffraction, electrical properties 1 Introduction Bi 2 Te 3 -Sb 2 Te 3 compounds ((Bi 1-X Sb x ) 2 Te 3 , BST-x) have been extensively studied due to their outstanding thermoelectric properties at near-room temperature ranging from 300-500K Mansouri et al. 2021 ; Sun et al. 2023 ; Mahan 1998 ; Gayner et al. 2022 . The BST-x system exhibits full solubility. At ambient conditions, Bi 2 Te 3 , Sb 2 Te 3 and BST compounds adopt the rhombohedral tetradymite crystal structure (space group R-3m (166)), formed by monoatomic sublayers of Bi/Sb, and Te atoms Jacobsen et al. 2007 ; Manjón et al. 2013 ; Feutelais et al. 1993 , independently of the relative concentration of Bi and Sb. The quintuple layers of Te-Bi(Sb)-Te-Bi(Sb)-Te are stacked in a sequence along c-axis direction Nakajima 1963 ; Hosokawa et al. 2019 . The high-pressure studies of Bi 2 Te 3 and Sb 2 Te 3 end members were motivated mainly by the possibility of using pressure to improve their higher thermoelectric conversion efficiency Ovsyannikov et al. 2008 ; Khvostantsev et al. 1982 ; Jacobsen et al. 2012 and the increasing interest of the superconducting phase Il’ina and Itskevich 1975 ; Zhu et al. 2013 ; Zhang et al. 2012 ; Einaga et al. 2010 . Bi 2 Te 3 and Sb 2 Te 3 , exhibit, at least, three phase transitions under pressure. Zhu et al. Zhu et al. 2011 clarified that Bi 2 Te 3 transforms from the rhombohedral R-3m (six-fold) phase ( \alpha -Bi 2 Te 3 or phase I) to a monoclinic C2/m (seven-fold) phase at 8 GPa ( \beta -Bi 2 Te 3 or phase II) and then to a C2/c (eight-fold) phase at 14 GPa ( \gamma -Bi 2 Te 3 or phase III). At higher pressures, Bi 2 Te 3 adopts a disorder solid-solution body-center cubic (BCC, A2) Im-3m structure (phase IV), with a 40% and 60% occupancy of the 2a Wyckoff Position (WP) for Bi and Te atoms, respectively Einaga et al. 2011 ; Zhu et al. 2011 . Identical structural evolution was concluded for Sb 2 Te 3 Ma et al. 2012 ; Souza et al. 2012 , albeit with slightly different critical pressures. It is noteworthy, that the disordered BCC structure for Sb 2 Te 3 appears at pressure above 20 GPa Ma et al. 2012 . Studies on the structural evolution of Bi 1-X Sb x Te 3 compounds under pressure are extremely limited. Indeed, Bai et al. Bai et al. 2022 studied Bi 0.5 Sb 1.5 Te 3 (BST-0.75) only inside the pressure stability range of the ambient phase, < 10 GPa. Jacobsen et al. Jacobsen et al. 2007 , studied BiSbTe 3 (BST-0.5) up to 18 GPa, and a phase transition was observed at \approx 7 GPa. However, the indexing of the high-pressure phase was not the one concluded by more recent studies on Bi 2 Te 3 and Sb 2 Te 3 . Motivated by the above, we have performed a detailed comparative in-situ synchrotron angle-dispersive powder x-ray diffraction (ADXRD) study of three different BST-x compounds with x=0.2, 0.7 and 0.9, up to 20+ GPa. Our main motivation was to explore the structural evolution under pressure as a function of varying Sb concentration. Our results document that the three BST compounds follow the same phase sequence with the pure Bi 2 Te 3 and Sb 2 Te 3 under pressure, without any noticeable effect of the Sb concentration on the critical pressures for the first two phase transitions. On the other hand, it is apparent that the increase of the Sb concentration results to an increase of the critical pressure for the formation of the BCC phase. In the case of BST-0.7, our study was extended to \approx 180 GPa, with the aim of exploring the stability of the BCC phase under Mbar pressures. Surprisingly, we observe that the BCC solid-solution phase remains stable up to the highest pressure of this study. Finally, for the same BST-0.7, in-situ electrical transport measurements as a function of pressure and temperature were performed. A clear indication for metallization was observed above \approx 12 GPa. 2 Experimental methods 2.1 Material Synthesis (Bi 1-x Sb x ) 2 Te 3 (BST-x) specimens with x = 0.2, 0.7 and 0.9 were synthesized by mixing commercial high-purity Bi, Sb and Te chunks (Alfa Aesar; 99.999 % purity) in quartz tubes according to the appropriate stoichiometric ratio. The tubes were sealed under vacuum (10 -5 Torr) and annealed at 1123 K for 8.5 h to melt the raw materials, and then cooled down to 300 K dueing 16 h Gayner et al. 2022 . The obtained ingots were ground into fine powders and sieved using a 56 \mu m mesh. 2.2 High pressure studies A BX-80 type diamond anvil cell (DAC) with 400 \mu m diameter diamond culets was used for the high-pressure experiments. A Rhenium foil pre-indented to \approx 50 \mu m and a central hole diameter of \approx 130 \mu mwith was used as gasket. Samples were loaded near the center of the sample chamber, along with a ruby chip and gold used as pressure markers, at the side. The shift of ruby line Syassen 2008 and the EOS of gold Anderson et al. 1989 were used to determine the pressure in-situ . Neon (Ne) was used as pressure transmitting medium (PTM) which is capable to maintain hydrostatic environment up to 20 GPa Klotz et al. 2009 , and loaded with a gas loader. For the study of BST-0.7 up to 180 GPa, beveled 100 \mu m diameter diamond culets were used and a Rhenium foil pre-indented to \approx 30 \mu m with a hole of 40 \mu m in diameter was used as gasket. Ne was used as the PTM. 2.2.1 X-ray Diffraction X-ray diffraction (XRD) measurements at ambient conditions were performed with the Cu K \alpha 1 ( \lambda =1.540598Å) X-ray line (Rigaku MiniFlex, Tokyo, Japan) to identify the starting crystal structures, see

Read the complete text