Radio Frequency from Optical with Instabilities below 10 − 15 10^{-15} - Generation and Measurement

A. Hati, M. Pomponio, N. V. Nardelli, T. Grogan, K. Kim, D. Lee, J. Ye, T. M. Fortier, A. Ludlow, C. W. Nelson · 2025

Read Radio Frequency from Optical with Instabilities below 10 − 15 10^{-15} - Generation and Measurement by A. Hati, M. Pomponio, N. V. Nardelli, T. Grogan, K. Kim, D. Lee, J. Ye, T. M. Fortier, A. Ludlow, C. W. Nelson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-05547.txt.

Introduction

Hati and nine co-authors describe a way to make a very steady radio signal from light signals. Their paper, from two thousand twenty-five, reaches doubt levels below one part in a huge count.

Two chains each start with a laser held steady by a cold or glass space. Comb tools turn the light first to a fast wave signal, then down to a slower radio one. The team built a new, low-noise digital tool to check each step. They match its results with a known check method. The work aids clocks and tests that need radio tones of the utmost steadiness.

Catalog record

CREATORA. Hati, M. Pomponio, N. V. Nardelli, T. Grogan, K. Kim, D. Lee, J. Ye, T. M. Fortier, A. Ludlow, C. W. Nelson
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-05547

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Radio Frequency from Optical with Instabilities below 10 − 15 10^{-15} - Generation and Measurement Preprint: AIP/123-QED A. Hati, M. Pomponio, N. V. Nardelli, T. Grogan, K. Kim, D. Lee, J. Ye, T. M. Fortier, A. Ludlow, C. W. Nelson Abstract This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of σ y ​ ( 1 ​ s ) < 10 − 15 \sigma_{y}(1~\text{s})<10^{-15} and low 10 − 18 10^{-18} level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of σ y ​ ( 1 ​ s ) ≈ 4.7 × 10 − 16 \sigma_{y}(1~\text{s})~\approx~4.7\times 10^{-16} at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of -140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems. I Introduction Generating extremely stable radio frequency (RF) signals from optical sources is an important capability that benefits high-precision radar, navigation, communication systems, and metrology. Optical clocks and cavity-stabilized lasers currently set the benchmark for frequency stability and accuracy, outperforming conventional microwave standards by two orders of magnitude both in short and long-term fractional frequency instability Katori 2011 ; Ludlow et al. 2015 . However, translating the extraordinary stability of these optical systems to more accessible RF frequencies, such as 10 MHz and 100 MHz, poses unique challenges. Optical clocks operate at frequencies in the hundreds of terahertz and achieve fractional frequency stabilities below 10^{-16} on short integration times. This remarkable precision will underpin the redefinition of the SI second Dimarcq et al. 2024 and extend the application of optical systems beyond their intrinsic domain. The optical frequency comb (OFC) is central to this effort because it enables phase-coherent division of optical frequencies into the RF and microwave regimes with an exceptional level of spectral purity and stability Jones et al. 2000 ; Fortier et al. 2011 ; Xie et al. 2017 . While previous developments have mainly focused on generating 10 GHz signals Nakamura et al. 2020 , there remains a demand for equally stable signals at lower frequencies, such as 10 MHz and 100 MHz, for applications requiring long-term temporal coherence, and high spectral purity. Currently, 10 MHz signals are widely used as a standard reference frequency in many electronic devices and test instruments, serving as the stable timing source for precise measurements. Additionally, distributing signals at 10 MHz and 100 MHz via coaxial cables is more convenient due to their low loss compared to microwave signals. Nonetheless, transferring stability from optical to RF regimes is limited by noise in photodiodes, quantum noise, thermal effects, and subsequent frequency divider noise. This paper demonstrates a system that transfers cavity-stabilized laser stability to 100 MHz and 10 MHz signals with short-term instability levels below 10^{-15} and 10^{-14} respectively. This system will be capable of transferring optical clock stability to domains that are critical for future scientific and industrial applications Yao et al. 2019 . Figure 1: Block diagram of the optical-to-RF synthesis chain. II Description of Optical-to-Radio Frequency Synthesis Figure 1 shows the block diagram of the optical-to-RF synthesis scheme. It employs a high-finesse cavity-stabilized laser, an OFC, and a microwave prescaler. We constructed two separate synthesis chains: one based on a cryogenic silicon cavity-stabilized laser at 1542 nm Matei et al. 2017 ; the other utilized an ultra-low-expansion (ULE) glass cavity at 1157 nm Schioppo et al. 2017 . Each respective cavity output was converted to a 10 GHz signal via Ti:Sapphire and Er/Yb:glass OFCs Fortier et al. 2011 ; Nardelli et al. 2023 . The 10 GHz microwave outputs were subsequently divided to 100 MHz with commercial prescalers. II.1 Cavity Stabilized Lasers The two cavity-stabilized lasers used in the experiment were originally designed and built to probe ultra-narrow atomic resonances in 171 Yb McGrew et al. 2018 and 87 Sr Aeppli et al. 2024 optical lattice clocks. These lasers exhibit coherence times of up to several seconds and ultra-low thermally limited phase noise. To achieve such high performance, the lasers are phase-stabilized to Fabry-Perot cavities via a Pound-Drever-Hall (PDH) lock, whereby the length stability of the cavities is transferred to the frequency and phase of the light. The 1157 nm laser, used to probe the 171 Yb clock, is based on a ULE glass cavity at room temperature with a finesse of 877,000. The light is frequency-doubled to reach the clock transition at 578 nm. The 1542 nm laser used to probe the 87 Sr clock is based on single-crystal silicon designed to operate at 124 K with a finesse of 500,000. A frequency comb is used to transfer stability to the Sr clock transition frequency at 698 nm. Both optical reference cavities are protected by several layers of thermal isolation, as well as active and passive vibration isolation. The cavities are engineered to neither expand nor contract (zero coefficient of temperature expansion) at their operating temperatures. The cavities are operated at a temperature at which the coefficient of thermal expansion is nominally zero. II.2 Optical Frequency Combs We generated the two ultrastable 10 GHz signals for our synthesizer using two optical frequency combs to divide down the optical references. One comb was based on a Ti:Sapphire mode-locked laser producing pulses at a rate of 1 GHz Fortier et al. 2011 , and the other comb was based on an Er/Yb:glass mode-locked laser with a 500 MHz repetition frequency ( f_{rep} ) Nardelli et al. 2023 . Both combs were fully stabilized with one comb tooth phase-locked to the optical reference laser, v_{\text{opt}} , while simultaneously stabilizing the carrier offset frequency, f_{o} , detected via a f-to-2f interferometer. This transferred the optical reference stability to the comb mode spacing, f_{rep}=\frac{(v_{\text{opt}}-f_{o})}{n} , where n is an integer on the order of 2\times 10^{5} . A photodetector converted the laser pulse train to a microwave signal comb with 1 GHz spacing Li et al. 2011 . A bandpass filter (BPF) then selected the desired harmonic of f_{rep} , either 10 GHz or 1 GHz. In the absence of added photodetector noise, photonically generated microwave signals permit a reduction in the phase modulation (PM) spectral density noise of the optical reference by (n/m)^{2} when photodetecting the m th harmonic of the OFC repetition rate. When dividing the 1157 nm (259 THz) and 1542 nm (195 THz) optical reference to 10 GHz, this results in a reduction in phase noise by 88 dB and 86 dB, respectively. The phase

Read the complete text