Performance Analysis of Spatial and Temporal Learning Networks in the Presence of DVL Noise

Rajini Makam, Nadav Cohen, Sumukh Shadakshari, Srinivasa Puranika Bhatta, Itzik Klein, Suresh Sundaram · 2025

Read Performance Analysis of Spatial and Temporal Learning Networks in the Presence of DVL Noise by Rajini Makam, Nadav Cohen, Sumukh Shadakshari, Srinivasa Puranika Bhatta, Itzik Klein, Suresh Sundaram (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-05309.txt.

Introduction

Rajini Makam and co-authors compare two neural networks that estimate speed for underwater robots from a Doppler log, in work from twenty twenty-five. Underwater craft cannot use satellite signals, so they rely on inertial sensors that drift. A Doppler velocity log, which bounces sound off the sea floor, is key to staying on course.

One network reads spatial patterns with a convolutional design. The other uses memory to read time patterns and handles biased, noisy data. Both trained and tested on real craft data from the Mediterranean Sea. Each beat the standard least squares method, cutting error by more than half with tighter spread. The memory model is put forward for noisy settings.

Catalog record

CREATORRajini Makam, Nadav Cohen, Sumukh Shadakshari, Srinivasa Puranika Bhatta, Itzik Klein, Suresh Sundaram
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-05309

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Performance Analysis of Spatial and Temporal Learning Networks in the Presence of DVL Noise Rajini Makam, Nadav Cohen, Sumukh Shadakshari, Srinivasa Puranika Bhatta, Itzik Klein, Suresh Sundaram Abstract Navigation is a critical aspect of autonomous underwater vehicles (AUVs) operating in complex underwater environments. Since global navigation satellite system (GNSS) signals are unavailable underwater, navigation relies on inertial sensing, which tends to accumulate errors over time. To mitigate this, the Doppler velocity log (DVL) plays a crucial role in determining navigation accuracy. In this paper, we compare two neural network models: an adapted version of BeamsNet, based on a one-dimensional convolutional neural network, and a Spectrally Normalized Memory Neural Network (SNMNN). The former focuses on extracting spatial features, while the latter leverages memory and temporal features to provide more accurate velocity estimates while handling biased and noisy DVL data. The proposed approaches were trained and tested on real AUV data collected in the Mediterranean Sea. Both models are evaluated in terms of accuracy and estimation certainty and are benchmarked against the least squares (LS) method, the current model-based approach. The results show that the neural network models achieve over a 50% improvement in RMSE for the estimation of the AUV velocity, with a smaller standard deviation. I Introduction Autonomous Underwater Vehicles are essential for underwater applications such as exploration, environmental monitoring, and naval operations. Accurate velocity estimation is crucial in enabling precise navigation and control of AUVs. Although inertial navigation systems (INS) provide navigation data, noise causes orientation, velocity, and position drift over time. Sensors such as the GNSS, DVL and pressure sensors (PS) correct this by providing position, velocity, and height data [ 1 , 2 ] . Inertial measurement units (IMUs) offer critical data on specific force and angular velocities. When combined with DVL velocity measurements, this allows for an accurate navigation solution, specifically underwater, which is a GNSS-denied environment with environmental disturbances [ 3 , 4 ] . To improve navigation accuracy, DVL was integrated with IMU data using traditional fusion algorithms such as the extended Kalman filter (EKF), unscented Kalman filter (UKF), and Particle Filter (PF) [ 5 , 6 , 7 ] . As a result, machine learning models have gained attention for their ability to capture intricate patterns in sensor data [ 8 ] . In recent years, Deep Neural Networks (DNNs) have gained increasing importance, particularly when large datasets from extended missions are available. This has led to improvements in inertial navigation in the land, aerial, and maritime domains [ 9 ] . In [ 10 ] , a fault-tolerant deep learning model called ”NavNet” was introduced, which integrates the Attitude and Heading Reference System (AHRS) with DVL for more precise navigation estimates. The approach was further advanced with the use of a recurrent neural network (RNN) in [ 11 ] . In [ 12 ] , the authors proposed a combined dead reckoning and long short-term memory (LSTM) method. A radial basis function is given in [ 13 ] to correct for current-induced errors in INS and DVL. In [ 14 ] , a combination of CNN-LSTM called C-LSTM is proposed to predict AUV pose. In this paper, we compare these two models, highlighting their complementary strengths in addressing different aspects of the data. BeamsNet, which is based on 1D-CNN, excels at learning spatial features, making them highly effective in identifying patterns that could indicate the AUV’s velocity at a specific moment [ 15 ] . On the other hand, memory-augmented neural networks focus on capturing temporal dynamics, enabling them to account for the sequence of velocity changes and how past states influence current behavior [ 16 ] . In the presence of bias and noise, this comparison is essential to determining whether CNNs, which extract spatial information, or memory networks, which maintain predictive stability, are superior in terms of accuracy, complexity, and storage. The performance of this algorithm is evaluated against the least squares (LS) method. The rest of the paper is organized as follows: Section II formulates the task at hand, Section III presents data-driven methodologies, Section IV describes data acquisition and discusses the results, and Section V concludes the findings. II Problem Formulation The DVL is used to measure the AUV’s velocity, thereby determining the accuracy of the navigation solution. To determine the velocity, the DVL transmits four acoustic beams in an ‘ \times ’-shaped configuration, known as the Janus Doppler configuration. In this configuration, the transducers are positioned at specific yaw and pitch angles relative to the DVL’s sensor body frame, as follows: \centering\boldsymbol{b}_{\dot{\imath}}=\begin{bmatrix}\cos{\Psi_{\dot{\imath}}}\sin{\Theta}\quad\sin{\Psi_{\dot{\imath}}}\sin{\Theta}\quad\cos{\Theta}\end{bmatrix}_{1\times 3},\dot{\imath}=1,2,3,4.\@add@centering (1) where, \boldsymbol{b}_{\dot{\imath}} represents the beam number, \Psi and \Theta correspond to the yaw and pitch angles relative to the body frame. The pitch angle is fixed and pre-determined by the manufacturer, ensuring the same value for all beams, while the yaw angle is defined as: \centering\Psi_{\dot{\imath}}=(\dot{\imath}-1)\cdot 90^{\circ}+45^{\circ}.\@add@centering (2) By defining a transformation matrix \mathbf{H} , the relationship between the DVL’s velocity in the body frame, \boldsymbol{v}_{b}^{b} , and the beam velocity measurements, \boldsymbol{v}^{beam} , can be expressed as: \centering\boldsymbol{v}^{beam}=\mathbf{H}\boldsymbol{v}_{b}^{b},\quad\mathbf{H}=\begin{bmatrix}\boldsymbol{b}_{1}\\ \boldsymbol{b}_{2}\\ \boldsymbol{b}_{3}\\ \boldsymbol{b}_{4}\\ \end{bmatrix}_{4\times 3}.\@add@centering (3) The beam velocity vector, \boldsymbol{v}^{beam} , represents the raw output of the DVL and is typically affected by in-run bias and white processing noise, as described by the following error model: \centering\tilde{\boldsymbol{v}}^{beam}=\mathbf{H}\boldsymbol{v}_{b}^{b}+\boldsymbol{b}_{DVL}+\boldsymbol{n},\@add@centering (4) where \boldsymbol{b}_{DVL} is the in-run bias represented as a 4\times 1 vector, \boldsymbol{n} denotes zero-mean white Gaussian noise, and \tilde{\boldsymbol{v}}^{beam} represents the corrupted beam velocity measurements. To extract the AUV velocity from the DVL’s raw data, the literature recommends using a least-squares (LS) formulation: \centering\hat{\boldsymbol{v}}_{b}^{b}=\underset{\boldsymbol{v}_{b}^{b}}{\argmin}{\mid\mid\tilde{\boldsymbol{v}}^{beam}-\mathbf{H}\boldsymbol{v}_{b}^{b}\mid\mid}^{2}.\@add@centering (5) The solution for \hat{\boldsymbol{v}}_{b}^{b} is obtained by multiplying the pseudoinverse of the transformation matrix \mathbf{H} by the raw beam measurements: \centering\hat{\boldsymbol{v}}_{b}^{b}=H^{{\dagger}}\tilde{\boldsymbol{v}}^{beam},\@add@centering (6) where, H^{{\dagger}}=(\mathbf{H}^{T}\mathbf{H})^{-1}\mathbf{H}^{T} . The underlying assumption regarding the LS method in this context is that it represents the best linear estimator. Furthermore, when the estimator is unbiased and the measurements are corrupted by independent and identically distributed Gaussian noise with known variance, the LS estimator is efficient and achieves the Cramér-Rao Lower Bound, which means that its variance is the lowest possible for an unbiased estimator [ 17 ] . In real-world applications, calibration may not completely eliminate in-run bias, and the noise may not be strictly white. As a result, these assumptions are often not fully satisfied, suggesting that more effective estimators could be available. III Methodology In this section, we present two learning strategies one based on the convolutional neural network (CNN) and the other on memory-based network. III-A BeamsNet The first methodology examined is a modified BeamsNet framework, which has two variations. In the first version, past DVL beam measurements and IMU data were used as input to a 1D CNN-based network to predict the AUV velocity. The second version assumes that no IMU data are available, using only past DVL beam measurements as input [ 15 ] . The fisrt version of modified BeamsNet (BeamsNetV1) architecture can be seen in Fig. 1 . The first layer of the network consists of two 1D convolutional layers that process both past and current IMU and DVL data. After a residual connection, the features extracted from the IMU and DVL are merged and passed through a series of fully connected layers. The result is then concatenated

Read the complete text