Manipulation of Elasto-Flexible Cables with Single or Multiple UAVs
Chiara Gabellieri, Lars Teeuwen, Yaolei Shen, Antonio Franchi · 2025
Read Manipulation of Elasto-Flexible Cables with Single or Multiple UAVs by Chiara Gabellieri, Lars Teeuwen, Yaolei Shen, Antonio Franchi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-04304.txt.
Introduction
Chiara Gabellieri, Lars Teeuwen, Yaolei Shen and Antonio Franchi study how one or more quadrotor drones can carry and shape soft, stretchy cables. The cable is modelled as a chain of linear springs joined by lumped-mass ball joints, a form that captures bending and stretching. For these systems the team finds sets of flat outputs, special variables from which the whole motion can be planned.
Simulations show cable handling driven by flatness-based paths. A two-drone test then backs the cable model in the real world. A closed-loop controller using cable-output feedback was also flown, giving the approach a full path from model to hardware.
Catalog record
| CREATOR | Chiara Gabellieri, Lars Teeuwen, Yaolei Shen, Antonio Franchi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-04304
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Manipulation of Elasto-Flexible Cables with Single or Multiple UAVs Chiara Gabellieri, Lars Teeuwen, Yaolei Shen, Antonio Franchi Abstract This work considers a large class of systems composed of multiple quadrotors manipulating deformable and extensible cables. The cable is described via a discretized representation, which decomposes it into linear springs interconnected through lumped-mass passive spherical joints. Sets of flat outputs are found for the systems. Numerical simulations support the findings by showing cable manipulation relying on flatness-based trajectories. Eventually, we present an experimental validation of the effectiveness of the proposed discretized cable model for a two-robot example. Moreover, a closed-loop controller based on the identified model and using cable-output feedback is experimentally tested. I Introduction and Related Work Deformable object manipulation is an important recent development in aerial robotics with potential applications ranging from fire fighting [ 1 ] , and in general the manipulation of fluid conduits [ 2 ] , to waterway maintenance [ 3 ] , e.g., in case of oil-spill events [ 4 ] . Yet, for the challenges it involves [ 5 ] , deformable object manipulation is still regarded as an open problem. An extensive survey on modeling, perception, and control techniques for deformable object manipulation is in [ 6 ] . This work especially focuses on the manipulation of cables through Uncrewed Aerial Vehicles (UAVs). Aerial robotic manipulation has traditionally considered rigid cables or linear elastic cables, typically as tools to manipulate attached payloads. More recently, increasingly general models have been used to describe cable flexibility, too. This work considers a model that describes flexible and extensible cables, thus enlarging the application range. In the following, we provide a quick overview of related works. I- 1 Rigid cable models They neglect bending and length changes and typically involve manipulation of suspended payloads. The differential flatness of a system composed of a single quadrotor and a slung load is shown in [ 7 ] , while [ 8 ] extends the results to a point mass or rigid body manipulated by multiple UAVs. I- 2 Inflexible extensible cable models They neglect bendability but allow variations of the cable length. [ 9 ] considers a payload suspended through a spring-damper cable below a single quadrotor, showing that the system is not differentially flat. Rigid bodies manipulated by multiple quadrotors are studied in [ 10 ] and [ 11 ] . Those works propose a controller based on a reduced model that neglects the cable elongations but shows good performance when applied to the elastic case. In [ 12 , 13 ] , elastic cables are considered in a cooperative manipulation scheme to regulate the pose of suspended rigid objects relying on individual UAV’s force estimation. I- 3 Flexible inextensible cable models They allow cable bending but not length variations. [ 14 ] proposes a controller to stabilize a quadrotor with a hanging bendable cable; similarly, an adaptive control to account for unknown mass is proposed in [ 15 ] . [ 16 ] considers cooperative aerial manipulation through flexible inextensible cables, and [ 17 ] shows the differential flatness of a point-mass or a rigid body suspended below multiple quadrotors through flexible inextensible cables. Moreover, the differential flatness of single- and multi-robot systems connected to these cables is shown in [ 1 ] . A different modeling approach than the lumped-parameter ones seen so far is adopted in [ 18 ] and [ 2 ] , where two-quadrotors are connected by a cable modeled as a catenary curve. Such a model describes the kinematics of the cable through a small number of parameters but is mostly limited to static conditions. Fig. 1: Schematics of the considered system composed of multiple quadrotors attached to an elasto-flexible cable. I- 4 Flexible and extensible cable models They allow the cable to bend and change its length. While the use of such models is found in manipulation with ground robots [ 19 , 6 , 20 ] , it is still mostly unexplored in the aerial robotic manipulation domain. [ 3 ] demonstrated the differential flatness of the discretized cable model composed of springs interconnected by lumped-mass passive spherical joints and attached between two quadrotors. The model incorporates external viscous forces, too, and it is the same used in this work. Other methods consider a distributed-parameter cable model, such as [ 21 ] , which applies back-stepping control to suppress the vibrations of a hose transported by a fixed-wing vehicle. To control the cable shape, [ 22 ] applies proper orthogonal decomposition to the partial differential equations that describe the dynamics of the cable, combined with the ordinary differential equations that describe the dynamics of the attached quadrotor. The main contributions of this work are as follows. • It demonstrates the differential flatness of a large class of tethered multi-UAV systems that go beyond the 2-UAV case analyzed in [ 3 ] . From a methodological point of view, compared to [ 1 ] , the present work considers a more general model that includes the elasticity of the cable, which cannot be ignored in different real-world scenarios [ 23 , 10 ] . The proposed discretized elastic model also allows finding meaningful flat outputs, namely, the positions of certain points on the cable. • Simulation results support the theoretical findings. • Filling a gap left open in [ 1 , 3 ] , this work presents for the first time an experimental validation of the efficacy of the proposed discretized cable model in an aerial manipulation system. The parameters of the cable model are identified from real data. Hence, the identified model is tested in a series of new real experiments, characterized by diverse velocities and cable trajectories, performed using two UAVs. • A model-based manipulation strategy that closes the loop on the cable output is also tested in real experiments, showing the ability to reduce the output error in the presence of parameter uncertainties. II Model Fig. 1 is a schematic representation of the different systems considered in this work. Especially, • systems (a) are a class of systems in which one end of the cable is attached to the ground and the remaining part is suspended through a certain number of quadrotors attached at will along it; one quadrotor is attached to the other end of the cable. System (a_{1}) is a subset of that class of systems, where there is only one robot. • In class (b) , are free-flying systems where one end of the cable is hanging, while the other end is attached to the last quadrotor; systems (b_{1}) , composed of one quadrotor manipulating a hanging cable, are a subset of the (b) class. • In class (c) are systems in which each ending of the cable is attached to a quadrotor; (c_{1}) , where two quadrotors manipulate a cable from its extremities, is a widely studied subset of class (c) [ 3 , 18 ] . We define an orthonormal inertial frame \mathcal{F}_{W}=\{O_{W},\bm{x}_{W},\bm{y}_{W},\bm{z}_{W}\} , where O_{W} is thew origin and \bm{x}_{W},\bm{y}_{W},\bm{z}_{W} are three orthogonal unit vectors. We call \bm{e}_{i} the i^{\rm{th}} column of the 3-by-3 identity matrix, \bm{I}_{3} . We consider deformable elastic cables and model them through a series of n