Implementation of a quantum addressable router using superconducting qubits
Connie Miao, Sébastien Léger, Ziqian Li, Gideon Lee, Liang Jiang, David I. Schuster · 2025
Read Implementation of a quantum addressable router using superconducting qubits by Connie Miao, Sébastien Léger, Ziqian Li, Gideon Lee, Liang Jiang, David I. Schuster (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-04295.txt.
Introduction
Connie Miao and co-authors build a quantum router in a 2025 experimental physics paper. A router that both directs quantum signals and reads a quantum address is called a Q2-router. It is a stepping stone to quantum networks and quantum random access memory, and it had not been demonstrated with superconducting circuits.
Their device uses fixed-frequency transmon qubits and two native controlled-iSWAP gates that exploit a strong ZZ interaction to route by address. Benchmarking and state tomography measured an average routing fidelity around ninety-five percent. Most errors traced to decoherence and to preparing and reading the states. The paper details the calibration behind the result.
Catalog record
| CREATOR | Connie Miao, Sébastien Léger, Ziqian Li, Gideon Lee, Liang Jiang, David I. Schuster |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 87 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-04295
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Implementation of a quantum addressable router using superconducting qubits Connie Miao, Sébastien Léger, Ziqian Li, Gideon Lee, Liang Jiang, David I. Schuster Abstract The implementation of a quantum router capable of performing both quantum signal routing and quantum addressing (a Q 2 -router) represents a key step toward building quantum networks and quantum random access memories. We realize a Q 2 -router that uses fixed-frequency transmon qubits to implement a routing protocol based on two native controlled-iSWAP gates. These gates leverage a large ZZ interaction to selectively route information according to a quantum address. We find an estimated average routing fidelity of 95.3 % 95.3\% , with errors arising primarily from decoherence or state preparation and measurement. We present a comprehensive calibration and characterization of both the c-iSWAP gates and the overall routing protocol through randomized benchmarking techniques and state tomography. Preprint: APS/123-QED I Introduction Routing information is crucial for classical processing and is even more essential in quantum systems due to the inherent constraint that quantum states cannot be duplicated [ 1 ] . The most general form of routing is achievable with a Q 2 -router, which allows both the data and address to be quantum mechanical [ 2 ] . Classical routing of quantum states plays a key role in quantum networking [ 3 , 4 ] . Similarly, the ability to direct information to superpositions of paths via quantum addresses enables efficient quantum random access memory (QRAM) [ 5 , 6 , 7 ] , which can aid algorithms such as Grover’s search [ 8 ] , quantum matrix inversion [ 9 ] , quantum deep learning [ 10 ] , and quantum simulation [ 11 , 12 ] . Additionally, quantum addressing itself offers applications in quantum communication [ 13 , 14 , 15 ] , quantum calibration [ 16 , 17 ] , data compression [ 18 ] , and error filtration [ 19 , 20 ] . Numerous platforms have experimentally explored classical routing of quantum states, including routing between qubits [ 21 , 22 , 23 ] and the directional emission of microwave [ 24 , 25 , 26 , 27 ] and optical [ 28 , 29 , 30 ] photons. However, the classical routers in these studies do not possess an internal addressing mechanism, as the routing direction must be encoded externally. This encoding is typically achieved, for instance, by applying different pulses corresponding to the routing direction or by altering the design of the sample. On the other hand, routing a state based on a quantum address has received various theoretical proposals based on photonics [ 31 ] , Rydberg atoms [ 32 ] , superconducting circuits [ 33 , 34 ] , and hybrid architectures [ 34 , 35 ] . Alongside these proposals, several groups [ 36 , 37 , 38 ] have implemented three-qubit gates that could be used as building blocks for a quantum addressing operation. A Q 2 -router has been implemented on a photonic platform [ 39 ] , but its dependence on non-deterministic post-selection hinders its applicability. As a result, a fully deterministic Q 2 -router has yet to be demonstrated. In this work, we use superconducting circuits to realize a Q 2 -router able to handle both a quantum signal and a quantum address. For minimal overhead, we employ fixed-frequency transmon qubits. The routing protocol, inspired by previous theoretical proposals [ 34 ] , consists of two controlled-iSWAP (c-iSWAP) gates. Each of these gates is natively implemented with an \ket{eg} to \ket{gf} two-qubit sideband gate and uses a large ZZ interaction to control the iSWAPs. The fidelities of these gates are estimated to be 97.77\pm 0.13\% and 98.62\pm 0.02\% within the valid subspace. The routing protocol has an average fidelity of 95.3\% and we estimate that qubit decoherence and state preparation and measurement are the main sources of error. In Sec. II we present our router design and protocol. In Sec. III we explain how the c-iSWAPs used in the protocol are calibrated and we benchmark them individually using randomized benchmarking and error amplification. Finally, in Sec. IV we estimate the fidelity of the routing protocol using state tomography and error amplification. II Router layout and protocol FIG. 1: Device and \mathrm{Q}^{2} -router concept. (a) False colored optical microscope image of the \mathrm{Q}^{2} router device with four transmon qubits (switch (purple), input (dark grey), output 1 (red), and output 2 (blue)) and their readout resonators (green) and charge drive lines (yellow). (b) Schematic of our \mathrm{Q}^{2} -router concept in a possible three-qubit entangled final state after one routing operation. Shaded state circles indicate superposition states while solid circles indicate classical states. Lines between pairs of qubits indicate strong couplings; the switch and input qubit are designed to be particularly strongly ZZ coupled (5.4 MHz). The red and blue arrows indicate the pairs of qubit between which we drive two-qubit swaps to implement the protocol. (c) Breakdown of the possible modes of operation of a general quantum router depending on whether the input and switch (routing) is classical or quantum. The \mathrm{Q}^{2} -router is capable of performing the most general form of routing where both the input and routing are quantum. (d) Quantum circuit describing the protocol: 1. iSWAP between input and output 1, controlled on switch in \ket{g} ; 2. iSWAP between input and output 2, controlled on switch in \ket{e} . (e) Physical implementation of the routing protocol using native \ket{eg} to \ket{gf} swaps with levels labeled for input and output states. The controlled aspect of each swap is implemented via the large ZZ interaction between the switch and input, which causes the swap to be blocked when the switch is in the wrong initial state. Our \mathrm{Q}^{2} -router is based on four fixed-frequency, grounded transmon qubits with fixed capacitive couplings. An optical image of the sample is shown in Fig. 1 (a) with the connectivity labeled in Fig. 1 (b). The circuit can be used in any of the four classical/quantum modes of information routing shown in Fig. 1 (c). To enable fast two-qubit gates, we have strong couplings on the order of g/2\pi\sim 50 MHz between the input and the switch as well as between the input and each of the two output qubits. The key ingredient to enable native c-iSWAPs is a relatively strong ZZ interaction between the input and switch ( \zeta_{\mathrm{SI}}/2\pi=5.4 MHz). Each qubit is also capacitively coupled to its own charge line for control and its own resonator, which enables four-qubit simultaneous readout. This sample was fabricated and packaged by the MIT SQUILL foundry and the measured qubit parameters and lifetimes are reported in Table 1 in Appendix B . In our convention, the input state is routed to output 1 (2) if the switch is in \ket{g} ( \ket{e} ), or to a superposition of the outputs with the relative amplitudes given by the switch amplitudes in \ket{g} or \ket{e} . This routing operation U_{\mathrm{route}} can be written as \displaystyle\ket{\psi}_{\mathrm{I}}\Bigl(\alpha\ket{0}+\beta\ket{1} \displaystyle\Bigr)_{\mathrm{S}}\ket{0}_{\mathrm{O_{1}}}\ket{0}_{\mathrm{O_{2}}} \displaystyle\downarrow{U_{\mathrm{route}}} \displaystyle\ket{0}_{\mathrm{I}}\Bigl(\alpha\ket{0}_{\mathrm{S}}\ket{\psi}_{\mathrm{O_{1}}}\ket{0}_{\mathrm{O_{2}}} \displaystyle+\beta\ket{1}_{\mathrm{S}}\ket{0}_{\mathrm{O_{1}}}\ket{\psi}_{\mathrm{O_{2}}}\Bigr), where I, S, O 1 and O 2 represent the input, switch, output 1, and output 2 qubits respectively. To perform the routing protocol, we tile one c-iSWAP, which