Spin-lattice relaxation of NV centers in nanodiamonds adsorbed on conducting and non-conducting surfaces
Izidor Benedičič, Yuri Tanuma, Žiga Gosar, Bastien Anézo, Mariusz Mrózek, Adam Wojciechowski, Denis Arčon · 2025
Read Spin-lattice relaxation of NV centers in nanodiamonds adsorbed on conducting and non-conducting surfaces by Izidor Benedičič, Yuri Tanuma, Žiga Gosar, Bastien Anézo, Mariusz Mrózek, Adam Wojciechowski, Denis Arčon (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-04172.txt.
Introduction
Diamond flaws can act as tiny quantum sensors, but their signal fades at a rate set by the crystal's inner noise. Izidor Benedičič and co-authors measure that fade for flaws in nano-sized diamonds in a 2025 study. They test grains from 40 nanometers to three micrometers wide, from room heat down to near six degrees above absolute zero.
The fade curves spread wide, which shows each flaw lives in its own micro-world. Heat-driven jiggle from the crystal lattice proved the main cause of the fade. The team also weighs use on metal bases, where signals can shift. Careful surface prep, they warn, is a must for sensor work.
Catalog record
| CREATOR | Izidor Benedičič, Yuri Tanuma, Žiga Gosar, Bastien Anézo, Mariusz Mrózek, Adam Wojciechowski, Denis Arčon |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-04172
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Spin-lattice relaxation of NV centers in nanodiamonds adsorbed on conducting and non-conducting surfaces Izidor Benedičič, Yuri Tanuma, Žiga Gosar, Bastien Anézo, Mariusz Mrózek, Adam Wojciechowski, Denis Arčon Abstract The nitrogen-vacancy (NV) centers in nanodiamonds can be utilized as low-cost, highly versatile quantum sensors for studying surface properties in condensed matter physics through the application of relaxometry protocols. For such applications, a detailed knowledge of the intrinsic relaxation processes of NV centers in nanodiamonds is necessary. Here, we study the spin-lattice relaxation rates of NV ensembles in nanodiamonds with average diameters of 40 nm and 3 μ \mu m between room temperature and ∼ 6 K \sim 6~\mathrm{K} . The NV relaxation curves fit to a stretched-exponential form with a stretching exponent α ≈ 0.7 \alpha\approx 0.7 , implying the large distribution of relaxation times of individual centers within nanodiamonds. We determine the Orbach-like scattering on phonons as the leading relaxation mechanism. Finally, we discuss the viability of nanodiamonds as surface sensors when deposited on a metallic substrate and emphasize the need for well-controlled surface preparation techniques. I Introduction Spin-lattice relaxation rate 1/T_{1} is one of the most important parameters extensively measured in nuclear magnetic resonance experiments. 1/T_{1} contains the information on the spectrum of local magnetic field fluctuations and is thus sensitive to the lattice dynamics and the coupling to localized or itinerant spins Abragam 1986 . In the former case, coupling to, e.g. lattice vibrations leads to Raman relaxation mechanisms, yielding characteristic power-law temperature dependencies of 1/T_{1} . On the other hand, in metallic samples hyperfine coupling to itinerant charges gives rise to the so-called Korringa relaxation epitomized by 1/T_{1}T=\mathrm{const} . Korringa 1950 However, nuclear magnetic resonance experiments require large quantities of the sample ( m\sim 100 mg) due to the inherently low sensitivity of this experimental technique. Therefore, they cannot be applied in studies with small sample volumes, e.g., in studies of field fluctuations on the surface of materials. A nitrogen-vacancy (NV) color center in a diamond is a point defect in the diamond lattice. It consists of a substitutional nitrogen atom (replacing a carbon atom) and a vacancy (missing carbon atom) in an adjacent lattice site. Recent advances in the detection and manipulation of NV centers have accelerated their use as quantum sensors in several fields, including magnetometry and relaxometry of solid-state systems, Kumar et al. 2024 magnetic resonance detectors Liu et al. 2022 and temperature sensing. Wu et al. 2022 ; Doherty et al. 2014 As the excitation and detection of NV centers rely on optical methods, the NV relaxometry shows great improvement in sensitivity compared to nuclear magnetic resonance thereby opening the possibility of addressing local-field dynamics on surfaces. For example, measurements of 1/T_{1} of NV centers implanted at a depth of about 15\pm 10 nm in a diamond substrate were employed to measure Johnson noise and ballistic transport in deposited silver films. Kolkowitz et al. 2015 Similarly, a single NV center in a scanning probe geometry has been employed for imaging of electrical conductivity at the nanoscale. Ariyaratne et al. 2018 Here we test the possibility of using NV centers in nanodiamonds (ND) to probe local field fluctuations on different surfaces. NDs are a system of particular interest in life sciences, where they can be used as non-bleaching, non-toxic sensors for monitoring ambient conditions or chemical reactions. Perona Martínez et al. 2020 ; Petrini et al. 2022 ; Neumann et al. 2013 ; Kucsko et al. 2013 On the other hand, the use of NV diamonds in nanoscale condensed matter studies remains largely unexplored. This is due to the limited availability of commercially manufactured diamond probes for atomic force microscopy as well as the slow progress in the fabrication of diamond chips tailored to specific applications. Nevertheless, nanodiamonds offer numerous advantages. Due to their small size, implanted NV centers in nanodiamonds are always relatively close to the surface, a necessary condition for strong coupling to magnetic noise on the sample surface. Furthermore, one could in experiments distinguish between NV centers positioned on different magnetic domains, surface terminations, or nanofabricated structures. This provides spatial information about the local surface properties without the need for a scanning probe magnetometry setup. Combined with low costs and long relaxation times, Prooth et al. 2023 ; March et al. 2023 nanodiamond-based relaxometry and magnetometry measurements could provide a versatile local alternative to bulk magnetometry and transport measurements. For all the applications mentioned above, a good understanding of the intrinsic properties of nanodiamonds and their dependence on nanodiamond size is required. Despite this, little is known about the intrinsic spin-lattice relaxation in nanodiamonds, with studies mostly focusing either on the low-temperature De Guillebon et al. 2020 or the NV centers in bulk diamonds. Jarmola et al. 2012 ; Mrózek et al. 2015 This work presents relaxometry measurements performed on NV center ensembles in nanodiamonds of various sizes deposited on conducting and insulating substrates. Specifically, we measure spin-lattice relaxation rates 1/T_{1} across a wide temperature range from room temperature to 6~\mathrm{K} and compare the relaxometry performance with relaxometry of single NV centers in diamond. We find that the sensitivity of the T_{1} relaxometry is limited by the significant distribution in the longitudinal relaxation rates and the tendency of smaller nanodiamonds to form agglomerates, which may limit the broader use of nanodiamond relaxometry in condensed matter physics problems. II Experimental methods For our experiments, we used fluorescent nanodiamonds purchased from Adámas Nanotechnologies. The concentration of implanted NV centers was 1.5 ppm for nanodiamonds with an average diameter of 40 nm (on average around 14 NV centers per single nanodiamond) and 2.5 ppm for 3 \mu m nanodiamonds (on average 8\times 10^{7} NV centers per diamond). The nanodiamonds were dispersed in water and deposited on the substrates using the drop-cast technique in a spin-coater rotating with 4000 RPM. High-purity thin films of gold on mica were purchased from Phasis Sàrl. For the glass substrate, we used microscope coverslips, cleaned in an ultrasonic bath with acetone and isopropanol. The NV relaxometry measurements were performed with a home-built confocal microscopy setup, schematically presented in Figure 1 (a). All measurements were done in zero magnetic field, in a Lake Shore ST-500 continuous-flow cryostat cooled with liquid helium. The samples were mounted on a copper cold finger with a resistive heater, which enables measurements in a wide temperature range between room temperature and 5 K. A green laser beam with 532 nm wavelength (Coherent Verdi G5) was attenuated to 1.5 mW and focused on the sample using a Nikon CFI S Plan Fluor ELWD 20XC microscope objective. From measurements of the collimated beam before the objective and the magnification, we estimate the diameter of the focused beam to be 1 \mu m 2 in the beam waist. The light emanating from the sample was collected with the same objective lens and passed through a dichroic mirror (Thorlabs DMLP605) and a laser-line filter (Thorlabs NF533-17) to remove the residual laser green light. The red light was detected with a variable-gain avalanche photodiode (Thorlabs APD410A) and the photodiode signal was collected with an oscilloscope (Keysight DSOX1204G). To deliver the microwave (MW) pulses to the sample, we used a home-built antenna, designed to allow for optical access while providing