Bubbles-induced transition to elasto-inertial turbulence

Hafiz Usman Naseer 1, Daulet Izbassarov 2, Marco Edoardo Rosti 3, Metin Muradoglu 1 · 2025

Read Bubbles-induced transition to elasto-inertial turbulence by Hafiz Usman Naseer 1, Daulet Izbassarov 2, Marco Edoardo Rosti 3, Metin Muradoglu 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-03943.txt.

Introduction

Hafiz Usman Naseer and co-authors simulate in 2025 how bubbles trigger turbulence in a viscoelastic channel flow. Elastic turbulence arises in polymer fluids even at slow speeds. Their interface-resolved simulations cover single and two-phase flows across wide ranges of flow and elasticity numbers.

Injecting bubbles into a smooth flow bends streamlines enough to spark elastic instability. The flow then transitions to a full turbulent state with a characteristic energy spectrum. Once turbulent, drag rises in all cases. At low speeds, bubbles line up in strings at the channel core, with intermittent bursts nearby.

Catalog record

CREATORHafiz Usman Naseer 1, Daulet Izbassarov 2, Marco Edoardo Rosti 3, Metin Muradoglu 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-03943

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Bubbles-induced transition to elasto-inertial turbulence Hafiz Usman Naseer 1, Daulet Izbassarov 2, Marco Edoardo Rosti 3, Metin Muradoglu 1 Abstract Interface-resolved direct numerical simulations are performed to investigate bubble-induced transition from laminar to elasto-inertial turbulent (EIT) state in a pressure-driven viscoelastic square channel flow. The Giesekus model is used to account for the viscoelasticity of the continuous phase while the dispersed phase is Newtonian. Simulations are performed for both single and two-phase flows for a wide range of the Reynolds ( R ​ e Re ) and the Weissenberg ( W ​ i Wi ) numbers. It is demonstrated that injection of bubbles into a laminar viscoelastic flow introduces streamline curvature that is sufficient to trigger an elastic instability leading to a transition to a fully EIT regime. The temporal turbulent kinetic energy spectrum shows a scaling of − 2 -2 for this multiphase EIT regime. It is shown that, once the flow is fully transitioned to a turbulent state by the injection of bubbles, the drag increases for all the cases. It is also observed that bubbles move towards the channel centreline and form a string-shaped alignment pattern in the core region at the lower values of R ​ e = 10 Re=10 and W ​ i = 1 Wi=1 . In this regime, the flow exhibits an intermittent behaviour, i.e., there are turbulent like fluctuations in the core region while it is essentially laminar near the wall. Unlike the solid particles, it is found that increasing shear-thinning effect breaks up the alignment of bubbles. Interestingly, the drag remains slightly lower in this intermittent regime than the corresponding laminar state. keywords Elasto-inertial turbulence, elastic instability, viscoelasticity, multiphase flows † † affiliation: 1 Department of Mechanical Engineering, Koç University, 34450 Istanbul, Türkiye 2 Finnish Meteorological Institute, Erik Palmenin aukio 1, 00560 Helsinki, Finland 3 Complex Fluids and Flows Unit, Okinawa Institute of Science and Technology Graduate University, 1919-1 Tancha, Onna-son, Okinawa 904-0495, Japan 1 Introduction Adding a minute amount of long-chain flexible polymers can drastically change mechanical properties of an otherwise Newtonian fluid and makes it viscoelastic. Stretching of polymer molecules causes elastic stresses and gives a memory to the fluid flow, resulting in a range of exotic and often counter-intuitive behaviours such as rod climbing, elastic recoil and drag reduction in turbulent flows ( Datta et al., 2022 ) . The exact mechanism behind many of the exotic phenomena exhibited by the viscoelastic fluids are yet to be fully explored. A striking example of such phenomena is sustaining a chaotic, turbulent like fluid motion observed at a low Reynolds number ( Groisman & Steinberg, 2000 ; Steinberg, 2021 ; Datta et al., 2022 ; Singh et al., 2024 ) . In case of a classical Newtonian turbulent flow, the flow instabilities arise from the non-linear convective terms of the Navier-Stokes equations, and therefore a very high Reynolds number is always required to sustain a turbulent flow field. In case of a viscoelastic fluid flow, however, the non-linear coupling between viscous and viscoelastic stresses are capable of triggering and sustaining a chaotic motion even in the absence of inertia ( Datta et al., 2022 ) . This turbulent flow state at a Reynolds number below the threshold value of inertial turbulence (IT) is often referred as the “elasto-inertial turbulence” (EIT). When the Reynolds number is further reduced to a negligibly smaller value, it turns out that high enough viscoelastic stresses are still capable of sustaining a chaotic turbulent-like state, referred as the elastic turbulence (ET), which is purely dominated by the elastic effects ( Steinberg (2021) ). The present study mainly focuses on the elasto-inertial instability and transition to the elasto-inertial turbulence where, as the name implies, the chaotic flow state is caused and sustained by both elastic and inertial effects. In the inertialess limit, only nonlinearity arises from the elastic stress that becomes anisotropic in a shear flow and results in the hoop stress acting on the fluid in the direction of the streamline curvature. This hoop stress provides the driving force for the elastic instability and triggers a transition to the elastic turbulent (ET) state even in the absence of inertia ( Steinberg, 2021 ) . Since the discovery of ET in inertialess flows with curved streamlines by Groisman & Steinberg (2000) , a non-linear instability leading to a similar kind of chaotic state in planar shear flows was suspected and investigated by Morozov & van Saarloos (2005) and Morozov & Van Saarloos (2019) . These studies suggested that a non-linear instability can also be triggered in a planar shear flow when a sufficient flow curvature is induced via external perturbations. To realize this, the initial perturbations have been usually induced in the form of blowing/suction at the wall or by placing an obstacle in the channel to trigger the instability and attain an EIT state ( Dubief et al. (2023) ). There are different pathways which can be followed to achieve the EIT state in a wall bounded flow. Samanta et al. (2013) have demonstrated that the transition threshold to inertial turbulence can be controlled by varying the polymer concentration. They computed the puff lifetimes to examine the effects of viscoelasticity on transition and differentiate the EIT states from the Newtonian turbulence in a pipe flow. They found that polymer additives delay the subcritical transition to IT conforming to their drag reducing effects in turbulent channel flows. They also demonstrated that, as the shear rate is increased, a separate instability occurs at a much lower Reynolds number than the inertial turbulence and triggers a very different type of disordered motion of elasto-inertial turbulence. Foggi Rota et al. (2024) showed that a reverse pathway can also be followed to achieve the EIT state. That is, viscoelasticity is introduced into an already turbulent Newtonian flow and then the Reynolds number is reduced gradually. Unlike the Newtonian flow, which would immediately re-laminarize below a certain threshold value of Re , the viscoelastic flow is capable of maintaining its turbulent state even at a Reynolds number as low as Re=0.5 in a rectilinear channel. Moreover, at a low Reynolds number, if some external perturbations are superimposed on a laminar viscoelastic flow field, these instabilities can grow and achieve the EIT state under a certain parametric setting ( Garg et al. (2018) , Beneitez et al. (2023) ; Beneitez et al. (2024) ). The dynamic features of EIT differ greatly from the inertial turbulence, which is the focus of many contemporary investigations. Sid et al. (2018) have demonstrated that the essential dynamic structures of EIT exist even in a two-dimensional (2D) flow. More recently, Dubief et al. (2022) have identified four distinct regimes of the stress field in a 2D channel flow by using the FENE-P viscoelastic model. These regimes were named as chaotic, chaotic arrowhead, intermittent arrowhead and stable arrowhead regimes based on constant contours of first normal stress difference ( N_{1} ) and pressure field. A sharp pressure gradient was observed within the flow field, similar to the one across a shock wave, promoting the shape of an arrowhead. In this 2D flow field, it was reported that an increase in the polymer concentration promoted stability while an increase in

Read the complete text