Mesostructural origins of the anisotropic compressive properties of low-density closed-cell foams: A deeper understanding
L. Liu, F. Liu, D. Zenkert, M. Åkermo, M. Fagerström · 2025
Read Mesostructural origins of the anisotropic compressive properties of low-density closed-cell foams: A deeper understanding by L. Liu, F. Liu, D. Zenkert, M. Åkermo, M. Fagerström (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-03847.txt.
Introduction
Liu and co-authors simulate how foam structure shapes squeezing strength in this 2025 paper. Many closed-cell foams grow with cells stretched along the rise direction, which makes them stronger one way than another. The fine mechanics behind that difference were not fully mapped, above all for light foams with thick cell faces.
The team built digital blocks of foam with varied cell shapes and random layouts, and squeezed them in simulation. Flat cell walls carried the load by stretching at first; bending mattered only after walls buckled. Shape effects reach strength through three paths: load-bearing area share, wall buckling strength, and wall tilt. Simple formulas linking cell shape to strength were derived from the findings.
Catalog record
| CREATOR | L. Liu, F. Liu, D. Zenkert, M. Åkermo, M. Fagerström |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 151 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-03847
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mesostructural origins of the anisotropic compressive properties of low-density closed-cell foams: A deeper understanding L. Liu, F. Liu, D. Zenkert, M. Åkermo, M. Fagerström Abstract Many closed-cell foams exhibit an elongated cell shape in the foam rise direction, resulting in anisotropic compressive properties, e.g. modulus and strength. Nevertheless, the underlying deformation mechanisms and how cell shape anisotropy induces this mechanical anisotropy are not yet fully understood, in particular for the foams with a high cell face fraction and low relative density. Moreover, the impacts of mesostructural stochastics are often overlooked. This contribution conducts a systematic numerical study on the anisotropic compressive behaviour of low-density closed-cell foams (with a relative density < 0.15 <0.15 ) , which accounts for cell shape anisotropy, cell structure and different mesostructural stochastics. Representative volume elements (RVE) of foam mesostructures are modelled, with cell walls described as Reissner-Mindlin shells in a finite rotation setting. A mixed stress-strain driven homogenization scheme is introduced, which allows for enforcing an overall uniaxial stress state. Uniaxial compressive loadings in different global directions are applied. Quantitative analysis of the cell wall deformation behaviour confirms the dominant role of membrane deformation in the initial elastic region, while the bending contribution gets important only after buckling, followed by membrane yielding . Based on the identified deformation mechanisms, analytical models are developed that relates mechanical anisotropy to cell shape anisotropy. It is found that cell shape anisotropy translates into the anisotropy of compressive properties through three pathways, cell load-bearing area fraction, cell wall buckling strength and cell wall inclination angle. Besides, the resulting mechanical anisotropy is strongly affected by the cell shape anisotropy stochastics while almost insensitive to the cell size and cell wall thickness stochastics. The present findings provide deeper insights into the relationships between the anisotropic compressive properties and mesostructures of low-density closed-cell foams . Journal: Elsevier Nomenclature \smash{\tilde{\vphantom{\rule{1.0pt}{6.14584pt}}\smash{\tilde{\boldsymbol{\mathbf{H}}}}}\,\;}^{\text{\scriptsize c}},\vec{G}^{\text{\scriptsize c}},\mathbf{K}^{\text{\scriptsize c}} Mesoscale shell membrane strain tensor, transverse shear strain vector and bending curvature tensor \smash{\tilde{\vphantom{\rule{1.0pt}{6.14584pt}}\smash{\tilde{\boldsymbol{\mathbf{N}}}}}\,\;}^{\text{\scriptsize c}},\vec{V}^{\text{\scriptsize c}},\mathbf{M}^{\text{\scriptsize c}} Mesoscale shell membrane stress resultant tensor, transverse shear stress resultant vector and bending moment tensor \hat{\mathbf{F}} Macroscale deformation gradient tensor \hat{\mathbf{P}} Macroscale first Piola-Kirchhoff stress tensor \hat{E},\hat{\nu},\hat{\sigma}_{\text{\scriptsize y}} RVE compressive modulus, Poisson’s ratio and yield strength \mathbf{F} Mesoscale deformation gradient tensor \mathbf{L},\mathbf{K} Mesoscale shell cross-sectional deformation gradient tensor and its through-thickness gradient \mathbf{N},\mathbf{M} Mesoscale shell stress resultant tensor and couple-stress resultant tensor \mathbf{P} Mesoscale first Piola-Kirchhoff stress tensor \mathcal{I}_{\text{\scriptsize w}},\mathcal{B}_{\text{\scriptsize w}} Cell wall strain energy partitioning indicator and buckling detector \mathcal{J}_{\text{\scriptsize w}},\mathcal{Y}_{\text{\scriptsize w}} Cell wall membrane plasticity indicator and yielding detector \mathcal{R} RVE cell shape anisotropy \mathcal{R}^{E},\mathcal{R}^{\sigma} RVE compressive modulus anisotropy and strength anisotropy \mathcal{R}_{\text{\scriptsize f}},\mathcal{R}_{\text{\scriptsize c}},\mathcal{R}_{\theta} Cell load-bearing area fraction ratio, cell wall buckling strength ratio and cell wall inclination angle ratio \mathcal{R}_{\text{\scriptsize v}} Cell shape anisotropy \mathcal{R}_{\text{\scriptsize v}}^{E},\mathcal{R}_{\text{\scriptsize v}}^{\sigma} Cell compressive modulus anisotropy and strength anisotropy \mathcal{R}_{\text{\scriptsize w}} Cell wall aspect ratio \theta_{\text{\scriptsize w}} Cell wall inclination angle d_{\text{\scriptsize v}} Cell equivalent diameter E,\nu,\sigma_{\text{\scriptsize y}} Base material Young’s modulus, Poisson’s ratio and yield stress E_{\text{\scriptsize w}},\sigma_{\text{\scriptsize c,w}},\sigma_{\text{\scriptsize y,w}} Cell wall membrane modulus, buckling strength and yield strength k_{\text{\scriptsize c}} Cell wall buckling coefficient L RVE dimension in the global direction L_{\text{\scriptsize v}} Cell dimension in the global direction L_{\text{\scriptsize w}},B_{\text{\scriptsize w}},t Cell wall length, width and thickness 1 Introduction Closed-cell foams are widely utilized in modern engineering applications due to their appealing specific mechanical properties with respect to low density, e.g. high stiffness and strength, and great energy absorption capacity [ 1 , 2 , 3 ] . These properties are attributed to the underlying mesostructure, which consists of a large number of cells isolated by thin cell walls (see Figure 1 ). During the foaming process, cells elongate in the foam rise direction, resulting in an anisotropic cell shape [ 4 , 5 ] . Cell walls are usually thicker around the edges and thinner close to the face centers [ 6 , 7 ] , commonly described by the cell edge/face material partitioning [ 8 ] . For some closed-cell foams, cell walls may have apparent initial curvature with wriggles and corrugations, and even be missing [ 9 , 10 , 11 ] . Moreover, many mesostructural features, e.g. relative density, cell shape, cell size and cell wall thickness, are highly variable [ 6 , 12 , 5 ] . All the above lead to a broad spectrum of mechanical properties. (a) (b) (c) Figure 1: Examples of closed-cell foam mesostructures made from different base materials: (a) aluminium, (b) polyvinylklorid (PVC) and (c) polyisocyanurate (PIR) foams. The red arrow indicates the foam rise direction. Reproduced from [ 4 ] , [ 5 ] and [ 13 ] , respectively, with permission from Elsevier. Given the exploitation of closed-cell foams for load-bearing applications, the compressive behaviour is often of interest [ 1 , 2 , 3 ] . For most elasto-plastic foams, the compressive stress-strain response can be divided into three regions: elasticity, plateau and densification [ 8 ] . The first region is governed by the elastic membrane (or stretching) and bending deformations of cell walls. As the load increases, cell walls start to buckle elastically or collapse plastically. The elastic buckling and plastic collapse are localized failure modes, which occur first in the weakest cell walls and gradually propagate through the entire mesostructure, resulting in a plateau region with the compressive stress almost constant. Besides, the cell wall elastic buckling is the leading failure mode for low-density foams, while plastic collapse is the corresponding failure mode for high-density foams [ 14 , 15 , 16 , 17 , 18 , 19 ] . The critical transition relative density depends on the base material properties and is also influenced by mesostructural features [ 16 , 17 , 20 , 19 ] . Finally, upon densification the severely deformed cell walls come to contact and interact, leading to a rapid increase of the compressive stiffness. To guide the closed-cell foam design, numerous studies have been conducted on the structure-property relationships. Among different mesostructural features, relative density is recognized as the most important in determining the compressive modulus and strength [ 8 ] . The relationships between these compressive properties and relative density have been well established. They can be expressed through power functions regardless of specific mechanisms [ 8 ] . Other features are implicitly accounted for by a set of constants of proportionality, usually identified from the experimental data. These relationships have demonstrated great success for a variety of foams (see e.g. aluminium [ 21 , 22 , 23 ] , polyvinylklorid (PVC) [ 24 , 7 , 25 ] , aluminium composite [ 26 , 27 ] , ceramic [ 28 ] and carbon [ 29 ] foams). Many closed-cell foams exhibit apparent anisotropic properties under compression (see e.g. aluminium [ 30 , 31 , 4 , 32 ] , PVC [ 33 , 7 , 25 ] and polyurethane (PU) [ 34 , 35 , 36 ] foams). For instance, the compressive modulus and strength in the foam rise direction (see Figure 1 ), are noticeably higher than the transverse direction. This mechanical anisotropy has been understood to primarily originate from cell shape anisotropy (see e.g. [ 30 , 31 , 4 , 34 , 32 ,