Stiffness and force production of outer hair cells in simple model systems
Kuni H Iwasa · 2025
Read Stiffness and force production of outer hair cells in simple model systems by Kuni H Iwasa (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-03720.txt.
Introduction
Kuni Iwasa models how ear hair cells stiffen and push in a 2025 arXiv paper. Outer hair cells in the cochlea have two sense parts: a hair bundle with gates, and a body wall that acts like a piezo film. Iwasa drops the cells into the plainest local ear models to watch the parts interact. High tones and low tones split the tale by how charge flows.
At high tones, bundle charge drives the body, which fights drag and lifts the peak rate by stiffening. At low tones, body strain adds drag instead, and bundle sense stiffens the body. The peak is thus half-piezo in kind.
Catalog record
| CREATOR | Kuni H Iwasa |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-03720
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Stiffness and force production of outer hair cells in simple model systems Kuni H Iwasa Abstract Cochlear outer hair cells (OHCs) have two mechanosensitive elements: the hair bundle with mechanotrasducer channels and the piezoelectric lateral wall of the cell body. The present report examines how these elements interact with each other by incorporating OHCs into the simplest local cochlear models. In the frequency range, typically above 1 kHz, where capacitive conductance is greater than the ionic conductance, hair bundle (HB) conductance drives the piezoelectric cell body and amplified oscillation by countering viscous drag, while the cell body increases its stiffness owing to strain-induced polarization, elevating the resonance frequency. Since HB sensitivity is essential for amplification, the resonance is not pure piezoelectric, but semi-piezoelectric. In the lower frequency range, typically lower than 100 Hz, strain induced polarization contributes to drag and the HB sensitivity increases cell body stiffness. keywords: hearing, sensitivity, piezoelectricity, mechanics Introduction Outer hair cells (OHCs) are essential for the sensitivity of the mammalian ear for providing mechanical feedback to amplify the vibration in the cochlea [ 1 , 2 ] . These cells have two mechanosensitive mechanisms: the piezoelectric lateral wall [ 3 , 4 ] and the hair bundle [ 5 ] . The present report studies how the interplay of these two mechanisms determines their response to external mechanical stimulation. The mechanosensitivity of the mammalian hair bundle [ 6 , 7 , 8 , 9 ] and the motile mechanism based on piezoelectricity in the cell body [ 10 , 11 , 12 , 13 , 14 , 7 , 15 ] have been carefully studied separately, both experimentally and theoretically. Studying the interplay of these two mechanisms is more complex because it depends on the connectivity of the OHC to its mechanical environment, particularly on the way the motile response of the OHC is fed back on the activation of its hair bundle. Here an OHC is incorporated into the two simplest mechanical systems to examine its motile activity study to clarify the interplay of the two mechanosensitive elements. More specifically, the present study focuses on the displacement and stiffness changes of the cell during forced periodic oscillation. Basic equations In the following, we consider each of the two simplest mechanical systems, where an OHC is incorporated. To describe these systems, let us start from piezoelectricity of the lateral wall, and then the equation of motion, followed by membrane currents in the OHC. Piezoelectric lateral wall Assume that the motile elements in the lateral membrane of the OHC have two states, the long state L and the short state S , and P is the fraction of the motile element in state L (Fig. 1 ). The natural length of the cell is X_{0}+aNP , where a is the contribution of a single motile element to the cell length associated with conformational change from S to L . This conformational change accompanies movement of charge q across the membrane. The number of the motile elements in the cell is N . In the equilibrium condition, P is determined by the free energy G , which is the sum of an electrical term qV and a mechanical term aF , where V is the membrane potential (or voltage) and F the force applied to the cell due to electromechanical coupling in the absence of external load [ 16 , 17 ] . Figure 1: Two states, long and short, of the motile element. The probability of state L is P and that of state S is 1-P . Energy level of state L is higher than that of S by -aF-qV when the membrane potential is V and the force applied to the motile element is F . Notice that a>0 and q<0 because depolarization shrinks the cell. Now put mechanical load, including an external elastic element K_{e} , a viscous element \eta , and a mass m , on an OHC with intrinsic stiffness k_{o} (Fig. 2 ). Assume that this system is initially in equilibrium, and then change the membrane potential by \Delta V . The motile element undergoes conformational change \Delta P . The electrical component of the free energy change is q\Delta V . The resulting mechanical displacement \Delta X_{p}=aN\Delta P generates force \Delta F_{i} due to the external elastic load. This force, in turn, produces an elastic displacement \Delta X_{e} in the OHC, resulting in the net displacement \Delta X=aN\Delta P-\Delta X_{e} on the OHC as well as the external elastic element K . Thus, \Delta F_{i}=k_{e}\Delta X=k_{o}\Delta X_{e} is the internally produced force. These relationships leads to \displaystyle\Delta X \displaystyle=aN\Delta P\;k_{o}/(k_{o}+K_{e}), (1a) \displaystyle\Delta F_{i} \displaystyle=aN\Delta P\;K_{e}k_{o}/(k_{o}+K_{e}). (1b) The above expression for \Delta F_{i} is valid for the two cases of connectivity in Fig. 2 A and B. The motile machinery also responds to an externally applied force F_{\mathrm{ext}} . The force F_{e} applied to the motile machinery depends on the connectivity (see Fig. 2 ) and is given by \displaystyle\Delta F_{e}=\left\{\begin{array}[]{cl}F_{\mathrm{ext}}&\mbox{with series connectivity,}\\ k_{o}/(k_{o}+K_{e})F_{\mathrm{ext}}&\mbox{with parallel connectivity.}\end{array}\right. The total free energy \Delta G is expressed by q\Delta V-a(\Delta F_{i}+\Delta F_{e}) with \Delta F_{i} given by Eq. 1b and \Delta F_{e} given by Eq. Piezoelectric lateral wall . We proceed by assuming that the free energy of the motile element at any given moment is determined by the given values of voltage V and the mechanical strain X of that moment, exactly the same as in the static case as described above. Then the variable P of the motile element changes toward its equilibrium value P_{\infty} , which is given by the Boltzmann function \displaystyle P_{\infty} \displaystyle=\exp[-\beta\Delta G]/(1+\exp[-\beta\Delta G])\quad\mathrm{with} (4a) \displaystyle\Delta G \displaystyle=G_{0}-q\Delta V-a(F_{i}+F_{e}), (4b) where the free energy difference \Delta G is from state S , the short conformation so that P is proportional to X and \beta=1/(k_{B}T) with Boltzmann’s constant k_{B} and the temperature T . The constant term G_{0} determines the ratio of the two states at \Delta V=0 and \Delta F=0 . The signs of the parameters are a>0 and q<0 because an increase in axial force F leads to elongation and a positive shift in V (depolarization) results in a reduction of the cell length (see below for details). If the motor state P satisfies P=P_{\infty} , the system is in equilibrium and does not undergo movement. The difference P-P_{\infty} drives the system. Here, we assume that the deviation of our system from equilibrium is small ( \beta\Delta G\ll 1 ). Then, we can expand the Boltzmann function to the first order term \displaystyle P_{\infty}\approx P_{\infty}^{0}-\beta\gamma\Delta G/4 (5) with \gamma=4P_{\infty}^{0}(1-P_{\infty}^{0}) . Equation of motion Now an OHC is incorporated into two cases of the simplest mechanical system (Fig. 2 ). The equation of motion of the system can be formally expressed by \displaystyle m\;d^{2}X/dt^{2}+\eta\;dX/dt=k_{o}(X_{\infty}-X)+F_{\mathrm{ext}}, (6) where X_{\infty}=aNP_{\infty}\;k_{o}/(k_{o}+K_{e}) , which shares the same factor that relates X and P , is the displacement that corresponds to the equilibrium for the present set of values for force F_{i}+F_{e} and voltage V . The difference between the present displacement X and X_{\infty} drives the system. Here m is the mass, \eta drag coefficient, and F external force. The inertia term can be justified if the system is not far from