First Limits on Light Dark Matter Interactions in a Low Threshold Two Channel Athermal Phonon Detector from the TESSERACT Collaboration

T.K. Bui, C.L. Chang, Y.-Y. Chang, L. Chaplinsky, C.W. Fink, M. Garcia-Sciveres, W. Guo, S.A. Hertel, X. Li, J. Lin, M. Lisovenko, R. Mahapatra, W. Matava, D.N. McKinsey, V. Novati, P.K. Patel, B. Penning, H.D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G.R.C Rischbieter, R.K. Romani, B. Sadoulet, · 2025

Read First Limits on Light Dark Matter Interactions in a Low Threshold Two Channel Athermal Phonon Detector from the TESSERACT Collaboration by T.K. Bui, C.L. Chang, Y.-Y. Chang, L. Chaplinsky, C.W. Fink, M. Garcia-Sciveres, W. Guo, S.A. Hertel, X. Li, J. Lin, M. Lisovenko, R. Mahapatra, W. Matava, D.N. McKinsey, V. Novati, P.K. Patel, B. Penning, H.D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G.R.C Rischbieter, R.K. Romani, B. Sadoulet, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-03683.txt.

Introduction

The TESSERACT team reports first results from a hunt for light dark matter in 2025. Their sensor is a thin silicon chip that feels the tiny heat jolts left when particles strike it. Run above ground for twelve hours, the chip reached the sharpest energy reading of any sensor of its kind. A two-channel readout let the team reject low-energy noise that plagues such hunts.

No dark matter signal stood out in the data. The blank result still sets the tightest limits yet for dark matter in one mass range, from 44 to 87 in the units used. At the top of that range, the cap on how often dark matter may strike normal matter fell to a new low. A careful seeding trick let the team probe the lowest masses ever reached by a direct search.

Catalog record

CREATORT.K. Bui, C.L. Chang, Y.-Y. Chang, L. Chaplinsky, C.W. Fink, M. Garcia-Sciveres, W. Guo, S.A. Hertel, X. Li, J. Lin, M. Lisovenko, R. Mahapatra, W. Matava, D.N. McKinsey, V. Novati, P.K. Patel, B. Penning, H.D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G.R.C Rischbieter, R.K. Romani, B. Sadoulet,
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-03683

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

First Limits on Light Dark Matter Interactions in a Low Threshold Two Channel Athermal Phonon Detector from the TESSERACT Collaboration T.K. Bui, C.L. Chang, Y.-Y. Chang, L. Chaplinsky, C.W. Fink, M. Garcia-Sciveres, W. Guo, S.A. Hertel, X. Li, J. Lin, M. Lisovenko, R. Mahapatra, W. Matava, D.N. McKinsey, V. Novati, P.K. Patel, B. Penning, H.D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G.R.C Rischbieter, R.K. Romani, B. Sadoulet, B. Serfass, P. Sorensen, B. Suerfu, A. Suzuki, V. Velan, G. Wang, Y. Wang, S.L. Watkins, M.R. Williams, J.K. Wuko, TESSERACT Collaboration, T. Aramaki, P. Cushman, N.N. Gite, A. Gupta, M.E. Huber, N.A. Kurinsky, B. von Krosigk, J.S. Mammo, A.J. Mayer, J. Nelson, S.M. Oser, L. Pandey, A. Pradeep, W. Rau, T. Saab Abstract We present results of a search for spin-independent dark matter-nucleon interactions in a 1 cm 2 by 1 mm thick (0.233 gram) high-resolution silicon athermal phonon detector operated above ground. For interactions in the substrate, this detector achieves a r.m.s. baseline energy resolution of 361.5 ± 4 meV 361.5\pm 4\text{\,}\mathrm{meV} , the best for any athermal phonon detector to date. With an exposure of 0.233 g 0.233\text{\,}\mathrm{g} × \times 12 hours, we place the most stringent constraints on dark matter masses between 44 and 87 MeV − 2 87\text{\,}\mathrm{MeV}\text{\,}{\mathrm{}}^{-2} , with the lowest unexplored cross section of 4 × 10 − 32 cm 2 4\text{\times}{10}^{-32}\text{\,}{\mathrm{cm}}^{2} at 87 MeV − 2 87\text{\,}\mathrm{MeV}\text{\,}{\mathrm{}}^{-2} . We employ a conservative salting technique to reach the lowest dark matter mass ever probed via direct detection experiment. This constraint is enabled by two-channel rejection of low-energy backgrounds that are coupled to individual sensors. I Introduction Current and previous generation dark matter (DM) direct detection experiments such as LZ [ 1 ] , XENONnT [ 2 ] , DarkSide [ 3 ] , and PandaX [ 4 ] have largely focused on the detection of weakly interacting massive particles (WIMPs), placing continually tightening constraints on DM models with masses above 1\text{\,}\mathrm{GeV}\text{\,}{\mathrm{}}^{-2} . Increasing interest [ 5 , 6 , 7 ] in searching for DM below a \mathrm{GeV}\text{\,}{\mathrm{}}^{-2} has motivated some collaborations, including CRESST [ 8 , 9 ] , EDELWEISS [ 10 ] , SuperCDMS [ 11 ] , DAMIC-M [ 12 ] and SENSEI [ 13 ] , to develop experiments sensitive to sub-GeV DM masses. This mass regime contains models of thermal relic DM (e.g. ELDERs [ 14 ] and SIMPs [ 15 ] ), freeze-in DM (e.g. FIMPs [ 16 ] ), secluded DM [ 17 , 18 ] , Hidden Valleys [ 19 ] , asymmetric DM [ 20 ] , and super-symmetric hidden sectors [ 21 , 22 ] that can either fully or partially produce the correct DM relic abundance. Directly detecting interactions from such DM candidates is challenging, given the eV scale nuclear recoils that they would create in a detector. Previous efforts to search for nuclear recoils from sub-GeV DM interactions were impeded by an unknown low energy background or backgrounds broadly termed the “Low Energy Excess” (LEE) [ 23 ] . These backgrounds are hypothesized to be associated with material effects in the detector environment, such as stress relaxation in the detector holding structure [ 24 ] or aluminum sensor films [ 25 ] , annihilation of radiation-induced defects in the detector crystal [ 26 ] , or scintillation of materials around the detector [ 27 ] . Recently, a subclass of LEE backgrounds has been observed to strongly couple to sensor films from which the detector is constructed [ 28 , 29 , 30 ] , allowing possible discrimination of this background from DM interactions via a coincidence requirement. Multiple athermal phonon readout channels, coupled to the same detector target, would respond simultaneously to athermal phonon bursts from possible DM interactions in the target, while the response to sensor-coupled backgrounds would primarily be confined to a single channel. In this Letter, we employ this two-channel technique to obtain novel constraints on low-mass DM interactions. This work is part of the TESSERACT (Transition Edge Sensors with Sub-eV Resolution And Cryogenic Targets) initiative, which aims to search for models of sub-GeV DM using a suite of cryogenic detector materials and technologies optimized for low detector thresholds. II Detector We search for low energy DM interactions in a 1\text{\,}{\mathrm{cm}}^{2} by 1\text{\,}\mathrm{mm} thick silicon athermal phonon detector, shown in Fig. 1 , which uses voltage-biased tungsten Transition Edge Sensors (TESs [ 31 ] , T_{c}\approx 48\text{\,}\mathrm{mK} ) coupled to aluminum athermal phonon collection fins in the common Quasiparticle‐trap‐assisted Electrothermal-feedback Transition edge sensor (“QET”) architecture [ 32 ] to sense phonon bursts in the silicon substrate. We wire 50 QETs into two channels of 25 QETs and read out each channel separately with DC SQUID array amplifiers. This readout scheme was designed to discriminate backgrounds which couple primarily to QET metal films from possible DM interactions. These backgrounds were expected to deposit more energy in one readout channel than in the other, whereas DM interactions with the substrate would produce roughly equal responses in both channels. Backgrounds associated with stress relaxation in the detector mount were suppressed by suspending the detector by wire bonds as in Ref. [ 24 ] . We describe low energy background and noise observations in this detector in Ref. [ 28 ] . Figure 1: The TESSERACT 1\text{\,}{\mathrm{cm}}^{2} detector used in this analysis [ 33 ] . The detector is supported by wirebonds attached at the top center and bottom corners of the detector. A gold wirebond (left side) is used to cool the detector. The two sensor channels (“left” and “right”) can be seen as the parallel lines, each biased and read out separately (see electrical wire bonds to readout PCB). As we are primarily interested in searching for low energy DM interactions in the detector, we undertook no special precautions to isolate our detector from high-energy backgrounds (e.g. background radioactivity, cosmic rays). We operated our detector in a dilution refrigerator two floors below ground level at the University of California, Berkeley. To calibrate our detector’s response, we injected short ( \sim \mathrm{\SIUnitSymbolMicro s} ) pulses of small numbers of 3.06\text{\,}\mathrm{eV} photons onto the detector, creating athermal pulses of quantized energy [ 28 ] . By observing the responses in the two channels, we measure the expected pulse shape for phonon DM-like events, and by combining the responses in the two channels measure a world-leading baseline phonon energy resolution of \sigma_{P}=$361.5\pm\pm 0.4\text{\,}\mathrm{meV}$ (stat.). Current signals from the two detector channels were continuously digitized at 1.25\text{\,}\mathrm{MHz} . Twenty-four hours of data were collected, interleaved with periods where the detector state was monitored to ensure stable operation. To mitigate bias in the analysis, the dataset was divided into 96 15-minute periods. Odd-numbered periods were unblinded and used to develop the analysis pipeline. Even-numbered periods were kept blinded and only opened after the analysis was finalized. Results from the blinded dataset are presented here. III Offline Trigger and Multi-Channel Optimal Filtering Offline analysis is performed in two stages: triggering, in which event times are identified, and feature extraction, in which event type and energy are estimated. Both stages use Optimal (Matched) Filtering [ 34 , 35 ] , a class of algorithms designed to

Read the complete text