Molecular-dynamics study of diffusional creep in uranium mononitride

Mohamed AbdulHameed, Benjamin Beeler, Conor O.T. Galvin, Michael W.D. Cooper, Nermeen Elamrawy, Antoine Claisse · 2025

Read Molecular-dynamics study of diffusional creep in uranium mononitride by Mohamed AbdulHameed, Benjamin Beeler, Conor O.T. Galvin, Michael W.D. Cooper, Nermeen Elamrawy, Antoine Claisse (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-03231.txt.

Introduction

Slow creep in a nuclear fuel is simulated atom by atom by Mohamed AbdulHameed and co-authors in a 2025 arXiv paper. Uranium mononitride is a hot, dense fuel with dim known mechanics. Tiny multi-grain blocks of it were squeezed in silico at high heat. Two creep kinds vie: flow through grain bulk or along grain seams. Seam flow won in the heat range tried.

Its start energy came out near 2.28 electron volts. A seam width near 2.7 nanometres fit the classic creep form well. Joined with a past slip model, the sum now spans fuel creep whole.

Catalog record

CREATORMohamed AbdulHameed, Benjamin Beeler, Conor O.T. Galvin, Michael W.D. Cooper, Nermeen Elamrawy, Antoine Claisse
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE57 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-03231

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Molecular-dynamics study of diffusional creep in uranium mononitride Mohamed AbdulHameed, Benjamin Beeler, Conor O.T. Galvin, Michael W.D. Cooper, Nermeen Elamrawy, Antoine Claisse Abstract Uranium mononitride (UN) is a promising advanced nuclear fuel due to its high thermal conductivity and high fissile density. Yet, many aspects of its mechanical behavior and microstructural features are currently unknown. In this paper, molecular dynamics (MD) simulations are used to study UN’s diffusional creep. Nanometer-sized polycrystals are used to simulate diffusional creep and to calculate an effective GB width. It is found that Nabarro-Herring creep is not dominant in the temperature range of 1700–2000 K and that the dominant diffusional creep mechanism is Coble creep with an activation energy of 2.28 ± \pm 0.09 eV. A method is proposed to calculate the diffusional GB width and its temperature dependence in polycrystals. The effective GB width of UN is calculated as 2.69 ± \pm 0.08 nm. This value fits very well with the prefactor of the phenomenological Coble creep formula. It is demonstrated that the most comprehensive thermal creep model for UN can be represented as the combination of our Coble creep model and the dislocation creep model proposed by Hayes et al. 1 Introduction Uranium mononitride (UN) is a potential next-generation nuclear fuel with several favorable properties like high fissile density, good heat transfer, compatibility with most potential cladding materials, and longer fuel residence periods [ 1 , 2 , 3 ] . However, it also has challenges like complex manufacturing processes, high cost due to 15 N enrichment, and vulnerability to steam at high temperatures [ 1 , 2 , 3 ] . Many aspects of the mechanical behavior and microstructural features of UN at high temperatures and under irradiation are lacking in both consistent experimental data and detailed mechanistic understanding. The mechanical properties of nuclear fuels are crucial for a better understanding of the pellet-cladding mechanical interactions (PCMI) that occur during reactor operation, where cladding creep-down and fuel swelling lead to contact and the development of stresses between the cladding and the fuel, which, with the build-up of fission products, promotes stress corrosion cracking in the cladding material [ 4 ] . Fuel creep has an important role in accommodating void swelling once the fuel contacts the cladding [ 2 ] . There are a limited number of experimental investigations into the creep behavior of UN. Hayes et al. [ 5 ] developed an empirical correlation for the steady-state thermal creep rate of UN based on three experimental investigations by Fassler et al. [ 6 ] , Vandervoort et al. [ 7 ] , and Uchida and Ichikawa [ 8 ] . These experiments were conducted at a temperature range of 1373–2083 K, a stress range of 13–55.1 MPa, and for five grain sizes: 9, 15, 30, 140, and 2000 \mu m. In addition, the tested samples contained varying levels of carbon and oxygen impurities. To determine the mechanism controlling the creep of UN, Hayes et al. [ 5 ] determined the average stress exponent, based only on the data by Fassler et al. [ 6 ] and Vandervoort et al. [ 7 ] , to be n=4.5 . They therefore concluded that the dominant creep mechanism is most probably a climb-controlled dislocation glide mechanism, for which there is no grain size dependence, i.e., the grain size exponent q=0 . The data by Uchida and Ichikawa [ 8 ] gave a stress exponent n = 1.8–2.6, which is indicative of a combination between diffusional and dislocation creep. However, Hayes et al. decided to disregard this data set because its temperature range was intermediate between that of Fassler et al. [ 6 ] and Vandervoort et al. [ 7 ] , and they deemed it was unlikely that a diffusion-based mechanism would only be active in such a narrow temperature range (i.e., 1583–1773 K). The rest of the correlation (i.e., the prefactor and the activation energy) was only fit to the data by Vandervoort et al. [ 7 ] because it is the only data set that reported stoichiometric samples of 100% theoretical density. The final correlation reads: \dot{\epsilon}=2.054\times 10^{-3}\sigma^{4.5}\,\mathrm{exp}\!\left(-\frac{39369.5}{T}\right), (1) where \dot{\epsilon} is the creep rate measured in s -1 , \sigma is the stress measured in MPa, and T is the temperature measured in K. The correlation is strictly valid for T = 1770–2083 K (although it was assumed by Hayes et al. to yield reasonable estimates of the creep rate over the range of 298–2523 K), \sigma = 20–34 MPa, and theoretically dense UN. The exponential term in Eq. 1 corresponds to an activation energy Q = 3.39 eV. Rogozkin et al. [ 9 ] performed experiments and reported thermal creep data for U 0.8 Pu 0.2 N. They found that for theoretically dense samples, the thermal creep rate follows the correlation: \dot{\epsilon}=27.7\sigma^{1.35}\,\mathrm{exp}\!\left(-\frac{40000}{T}\right), (2) which indicates an activation energy Q = 3.45 eV. The investigators noted that the mass fraction of oxygen and carbon impurities did not exceed 0.15% and the stress varied from 10 to 60 MPa. However, they did not report any grain sizes or an explicit unit for the creep rate. Note that a stress exponent of 1.35 in Eq. 2 is close to 1 and might indicate a diffusion-dominant creep mechanism [ 9 , 10 ] . Nabarro-Herring (N-H) creep of UN has been investigated via computational tools. Kotomin et al. [ 11 ] conducted a DFT investigation of the diffusion mechanisms of U and N atoms in UN and calculated their associated migration energies. Assuming thermal creep is rate-limited by the diffusion of the slower species (i.e., uranium), they concluded that the activation energy of thermal creep in bulk UN is 5.6 eV. Their thermal creep model is incorporated into the TRANSURANUS fuel performance code [ 11 ] . Finally, Konovalov et al. [ 12 ] conducted a compilation of available data on UN, (U, Pu)N, UC, and mononitrides of refractory metals (e.g., Zr and Ti) to find a correlation for thermal and irradiation creep in UN and (U, Pu)N. Based on the data, they assumed a combination of dislocation-climb creep and Coble creep according to: \dot{\epsilon}=a_{1}\sigma^{n}\,\mathrm{exp}\!\left(-\frac{Q_{b}}{k_{\mathrm{B}}T}\right)+fa_{2}\frac{\sigma}{k_{\mathrm{B}}T}\,\mathrm{exp}\!\left(-\frac{Q_{\mathrm{GB}}}{k_{\mathrm{B}}T}\right), (3) where a_{1} and a_{2} are estimated from typical values for refractory-metal mononitrides, the stress exponent of the dislocation-climb creep part is n=4.5 , the same as in Eq. 1 , and f is the volume fraction of GBs. Note that the dependence of the Coble creep on the grain size is included in a_{2} . They further assumed that the activation energy for the dislocation-climb creep is equal to the activation energy of bulk diffusion of U atoms in UN, i.e., Q_{b} = 5 eV. Based on the observation that in typical metallic compounds, the activation energy of GB diffusion is nearly half that of bulk diffusion, they assumed Q_{\mathrm{GB}}=0.53Q_{b} similar to UC, because measurements of U self-diffusion at GBs in UN are not yet available. An important result of their analysis is that diffusional creep is the dominant mechanism in the temperature range of fuel manufacturing processes and nuclear reactor operation, although they did not clarify the effect of stress and grain size. A few observations can be made about the previous studies. The assumption by Hayes

Read the complete text