Road Boundary Detection Using 4D mmWave Radar for Autonomous Driving

Yuyan Wu, Hae Young Noh · 2025

Read Road Boundary Detection Using 4D mmWave Radar for Autonomous Driving by Yuyan Wu, Hae Young Noh (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-01930.txt.

Introduction

Yuyan Wu and Hae Young Noh detect road edges with a radar sensor for self-driving cars, in a paper from twenty twenty-five. Cameras and laser scanners falter in darkness or glare, and lasers cost too much for cheap cars. Radar is cheap and robust, and road edges such as fences and bushes bounce its waves back.

Radar clouds are noisy, so the team first trims points that break physical rules for road edges. A custom loss then punishes guesses far from the true edge. Motion over time is also used, by comparing each frame with the last after correcting for the car's own movement. In real drives, the method labeled edge points with high accuracy and cut distance error sharply versus a baseline.

Catalog record

CREATORYuyan Wu, Hae Young Noh
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-01930

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Road Boundary Detection Using 4D mmWave Radar for Autonomous Driving Yuyan Wu, Hae Young Noh Abstract Detecting road boundaries, the static physical edges of the available driving area, is important for safe navigation and effective path planning in autonomous driving and advanced driver-assistance systems (ADAS). Traditionally, road boundary detection in autonomous driving relies on cameras and LiDAR. However, they are vulnerable to poor lighting conditions, such as nighttime and direct sunlight glare, or prohibitively expensive for low-end vehicles. To this end, this paper introduces 4DRadarRBD, the first road boundary detection method based on 4D mmWave radar which is cost-effective and robust in complex driving scenarios. The main idea is that road boundaries (e.g., fences, bushes, roadblocks), reflect millimeter waves, thus generating point cloud data for the radar. To overcome the challenge that the 4D mmWave radar point clouds contain many noisy points, we initially reduce noisy points via physical constraints for road boundaries and then segment the road boundary points from the noisy points by incorporating a distance-based loss which penalizes for falsely detecting the points far away from the actual road boundaries. In addition, we capture the temporal dynamics of point cloud sequences by utilizing each point’s deviation from the vehicle motion-compensated road boundary detection result obtained from the previous frame, along with the spatial distribution of the point cloud for point-wise road boundary segmentation. We evaluated 4DRadarRBD through real-world driving tests and achieved a road boundary point segmentation accuracy of 93 % \% , with a median distance error of up to 0.023 m and an error reduction of 92.6 % \% compared to the baseline model. I Introduction Road boundary detection is important for autonomous driving and advanced driver-assistance systems to prevent collisions. Road boundaries are the static physical edges of drivable areas, including fences, bushes, and roadblocks, beyond which there is a risk of collision. Road boundary detection helps reduce the risk of collisions and allows navigation systems to maintain a safe distance from the road boundary in autonomous driving. Current sensing methods for road boundary detection mainly include RGB cameras and LiDAR [ 1 , 2 , 3 , 4 , 5 , 6 ] . However, RGB cameras lack depth perception and struggle in poor lighting conditions. LiDAR provides accurate distance information but is costly and impractical for lower-end vehicles. Thus, autonomous driving systems require a cost-effective and robust road boundary detection method that performs reliably across various lighting conditions. This paper introduces 4DRadarRBD, the first 4D mmWave radar-based road boundary detection system which is cost-effective and robust for complex driving scenarios. The main idea of the system is that the radar emits millimeter waves, which get reflected by road boundaries (e.g., fences, bushes, and roadblocks). These reflections are captured as point clouds, which are then used to detect the road boundaries. Unlike 3D mmWave radar, which estimates range, azimuth, and Doppler velocity, 4D mmWave radar introduces elevation measurement, significantly enhancing its ability to differentiate between various objects. The inclusion of elevation data allows the radar to more accurately identify whether an object is an overhead structure that can be safely passed beneath or a road boundary that requires maintaining a safe distance. However, there are two main challenges for road boundary detection using 4D mmWave radar. Firstly, in complex driving environments, the 4D mmWave radar point cloud contains a large number of noisy points from non-road boundary objects (e.g., vehicles, overpasses) and random ghost points. Secondly, it is difficult to capture the temporal dynamics of the point cloud sequences with the fast vehicle movement (up to 30 m/s) and the low radar sampling rate ( \sim 10 Hz). This results in a large number of points appearing at the edges of the radar’s sensing range in each frame, making it challenging to maintain temporal consistency in boundary estimation. 4DRadarRBD addresses these challenges and achieves road boundary detection with three modules. In the first module, the point cloud is preprocessed to extract point-wise features, reduce noise using physical constraints, and mitigate point cloud sparsity through frame fusion. In the second module, we segment the road boundary points from the noisy points and capture the temporal dynamics of the point cloud. Finally, the third module fits road boundary curves based on the segmented road boundary points, providing continuous road boundary estimates for control and planning tasks. The first challenge is addressed by first utilizing the physical constraints of the road boundary to reduce noisy points in the first module and then incorporating a distance-based loss to penalize points far away from the road boundary for being detected as road boundaries in the second module. To solve the second challenge, we capture the temporal dynamics of point cloud sequences with the deviation of each point in the current frame from the motion-compensated road boundary points of the previous frame. The deviation is incorporated as a feature in the point cloud segmentation framework in the second module, improving temporal consistency in road boundary detection. The main contributions of 4DRadarRBD consist of: • We introduce 4DRadarRBD, the first 4D mmWave radar-based road boundary detection system, which is cost-efficient and robust to complex driving scenarios. • We mitigate the effects of noisy points and capture the temporal dynamics of point cloud sequences for robust road boundary detection. • We evaluate the 4DRadarRBD system through real-world driving tests in complex scenarios and achieve accurate and robust road boundary detection results. II 4DRadarRBD System In this section, we introduce the 4DRadarRBD system which detects road boundaries using point cloud data from 4D mmWave radar. The system mainly includes three modules: 1) point cloud preprocessing, 2) point-wise road boundary segmentation, and 3) curve-wise road boundary shape fitting (see Fig. 1 ). Fig. 1: 4DRadarRBD System Overview II-A Module 1: Point Cloud Preprocessing We first preprocess the point cloud obtained from 4D mmWave radar to extract point-wise features for the road boundary segmentation task while reducing noisy points and mitigating the sparsity of the point cloud. II-A 1 Point-wise Feature Extraction for Radar Point Clouds The point-wise features of the point cloud are extracted from 4D mmWave radar signals and onboard sensors (GPS, IMU), including position coordinates (x, y, z), Doppler velocity, signal-to-noise ratio, range, vehicle velocity, and yaw rate. Among them, the first four features are derived from 4D mmWave radar, while vehicle velocity and yaw rate are obtained from GPS and IMU sensors. The position (x, y, z) is defined with respect to a coordinate system originating at the location of 4D mmWave radar, which is typically mounted near the front license plate of the vehicle. In this coordinate system, the x-axis extends to the right-hand side of the vehicle, the y-axis points forward along the vehicle’s driving direction, and the z-axis points upward. Position and range indicate the object’s location, while the signal-to-noise ratio provides insight into the material and surface properties of the object. Additionally, vehicle speed, yaw rate, and Doppler velocity collectively describe the object’s motion. These features contain critical information about the object reflecting millimeter waves and are important for accurately segmenting road boundary points. II-A 2 Noise Reduction Using Physical Constraints We apply physical constraints to filter out noisy points by excluding those that exceed the

Read the complete text