Hybrid MIMO in the Upper Mid-Band: Architectures, Processing, and Energy Efficiency

Marouan Mizmizi, Ahmed Alkhateeb, Umberto Spagnolini · 2025

Read Hybrid MIMO in the Upper Mid-Band: Architectures, Processing, and Energy Efficiency by Marouan Mizmizi, Ahmed Alkhateeb, Umberto Spagnolini (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-01382.txt.

Introduction

Marouan Mizmizi, Ahmed Alkhateeb, and Umberto Spagnolini survey hybrid antenna systems for the upper mid band of 6G in a 2025 arXiv paper. That band, from 7 to 24 gigahertz, splits the gap between low band reach and high band speed. It is a sweet spot for the next wireless age.

The authors sort designs into two classes: one that uses all sub bands at once for speed, and one that hands sub bands out by need. They also weigh fully digital chains against mixed analog and digital ones, and shared against dedicated radio chains. In their uplink tests, shared chains matched the speed of dedicated ones at near half the power. Fully digital chains were faster but drank more power. The speed first class cost a bit more power yet gave four times the yield.

Catalog record

CREATORMarouan Mizmizi, Ahmed Alkhateeb, Umberto Spagnolini
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE61 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-01382

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hybrid MIMO in the Upper Mid-Band: Architectures, Processing, and Energy Efficiency Marouan Mizmizi, Ahmed Alkhateeb, Umberto Spagnolini Abstract As 6G networks evolve, the upper mid-band spectrum (7 GHz–24 GHz), or frequency range 3 (FR3), is emerging as a promising balance between the coverage offered by sub-6 GHz bands and the high-capacity of millimeter wave (mmWave) frequencies. This paper explores the structure of FR3 hybrid MIMO systems and proposes two architectural classes: Frequency Integrated (FI) and Frequency Partitioned (FP) . FI architectures enhance spectral efficiency by exploiting multiple sub-bands parallelism, while FP architectures dynamically allocate sub-band access according to specific application requirements. Additionally, two approaches—fully digital (FD) and hybrid analog-digital (HAD)—are considered, comparing shared (SRF) versus dedicated RF (DRF) chain configurations. Herein signal processing solutions are investigated, particularly for an uplink multi-user scenario with power control optimization. Results demonstrate that SRF and DRF architectures achieve comparable spectral efficiency; however, SRF structures consume nearly half the power of DRF in the considered setup. While FD architectures provide higher spectral efficiency, they do so at the cost of increased power consumption compared to HAD. Additionally, FI architectures show slightly greater power consumption compared to FP; however, they provide a significant benefit in spectral efficiency (over 4 × 4\times ), emphasizing an important trade-off in FR3 engineering. I Introduction As 6G networks begin to take shape, there is much anticipation on the transformative applications enabled, ranging from ultra-reliable communications to immersive augmented reality and high-speed vehicle-to-vehicle interaction [ 1 ] . One of the key challenges for 6G is to provide a solution that balances the need for high capacity with coverage in diverse environments [ 2 ] . This challenge has led to growing interest in frequency range 3 (FR3), a new spectrum proposed during the 23^{\mathrm{th}} World Radio Conference (WRC) [ 3 ] , which spans from 7 GHz to 24 GHz, as depicted in Fig. 1 . Fig. 1: FR3 Spectrum and candidate frequencies for 5G/6G and 6G Millimeter wave frequencies (mmWave) were initially considered a promising candidate for mobile broadband due to their large available bandwidth. However, their poor propagation characteristics, including high indoor-to-outdoor attenuation and severe path loss, have significantly limited their applicability in mobile communications [ 4 ] . As a result, FR3 also referred to as the upper mid-band, has gained attention as a compromise between highly congested sub-6 GHz bands (FR1) and limited coverage of mmWave frequencies (FR2) [ 5 ] . The drawback of FR3 is the fragmentation of the spectrum into multiple subbands [ 6 , 7 ] . Despite its advantages, several challenges must be addressed to fully exploit FR3’s potential. One significant issue is spectrum sharing with existing services such as satellite communications, military radar, and passive radio astronomy. For instance, the 10.7–12.75 GHz band is heavily utilized for satellite TV, while the 14–18 GHz range is allocated for high-resolution military radar [ 8 ] . To ensure coexistence among these services, advanced mechanisms such as spectrum sensing and interference suppression are necessary [ 9 ] . On the hardware side, the wide and interleaved bandwidths in FR3 and the varying carrier frequencies introduce considerable complexity. The design of compact and energy-efficient systems that can support these specifications pose a significant challenge [ 10 ] . Compact multi-band antenna arrays and broadband components are essential for managing the dynamic spectrum environment. These technologies not only facilitate the simultaneous processing of multiple carriers but also support directional transmission techniques, which are crucial for minimizing interference and accommodating spectrum sharing. A simple approach to address the challenges of FR3 involves implementing separated RF front ends with distinct RF chains for each carrier. Each chain processes RF signals independently from others, and the outputs are aggregated at the baseband processing (BB) stage. Although this architecture is the most straightforward solution, it is RF resource-intensive and inefficient due to the significant redundancy in hardware components. Nevertheless, only a few studies have been conducted in this direction. For example, the authors of [ 11 ] developed a software-defined radio platform with frequency hopping for FR3. This architecture employs distinct antennas for each carrier, with common RF chains and a shared BB stage to process transmitted or received signals, with an RF switch used to select the active antenna and corresponding carrier. While this approach is cost-effective, it processes each carrier sequentially, rather than simultaneously, which limits the spectral efficiency that could be achieved through the simultaneous processing of multiple carriers. A more sophisticated alternative for FR3, proposed in [ 10 , 12 ] , proposes unified multiband RF front ends using wideband components to handle multiple carriers within shared RF chains. While this reduces hardware redundancy and increase spectral efficiency, it demands meticulous design and high-performance components. Contributions The architectural choices in FR3 systems have a significant impact on system performance, requiring tailored signal processing strategies that align with the hardware design. However, the existing literature lacks a comprehensive exploration of these trade-offs. This paper addresses this critical gap by providing a novel classification of architectural design strategies and analyzing their performance in uplink multi-user, multi-band MIMO scenarios. Specifically, the paper introduces two classes of multi-band access strategies: Frequency Integrated (FI) and Frequency Partitioned (FP) . In FI architectures, the system simultaneously accesses multiple sub-bands to optimize overall spectral efficiency. In contrast, FP architectures dynamically allocate access to sub-bands, scheduling them based on specific application requirements. Within these categories, the paper further explores various design strategies, distinguishing between fully digital (FD) and hybrid analog-digital (HAD) approaches, and also considers whether RF chains are shared (SRF) or dedicated (DRF) among sub-bands. The main contributions of this work are as follows: • We propose a comprehensive classification of potential architectures for FR3 systems, distinguishing between FI and FP approaches. We further differentiate FD and HAD designs within each class, considering whether RF chains are shared (SRF) or dedicated (DRF) among sub-bands. • For each architecture, we derive the optimal power control and beamforming strategies, specifically tailored to maximize the sum rate across all sub-bands simultaneously. This includes developing optimal beamforing strategies for hybrid MIMO systems under hybrid beamforming constraints imposed by phase-shifting networks. • For each architecture, we comprehensively analyze the impact of key RF components, including noise figure, power consumption, and linear distortions, on the system’s performance. The study specifically evaluates the effects of these impairments, providing insights into their influence on architectural choices. The remainder of this paper is organized as follows. Sec. 2 defines the system model for the multi-user, multi-band FR3 scenario. Sec. 3 analyzes the hardware impairments, focusing on the key RF components. Sec.4 outlines the proposed architectural designs along with their classification. Se. 5 presents the optimization framework, detailing power allocation and beamforming strategies. Sec. 6 discusses the performance evaluation. Finally, Section 7 concludes the paper. II System Model Fig. 2: Multi-user multi-band reference scenario. We consider the MIMO base station (BS), depicted in Fig. 2 , with N_{a} antennas, operating in the FR3 and supporting multiple sub-bands with different bandwidths ( B_{c} ), specifically B_{1} at 6 GHz, B_{2} at 12 GHz, B_{3} at 18 GHz, and B_{4} at 24 GHz. The BS serves multiple single-antenna UEs, denoted by the set \mathcal{K}

Read the complete text