Gaussian Process Surrogate Models for Efficient Estimation of Structural Response Distributions and Order Statistics
Vegard Flovik, Sebastian Winter, Christian Agrell · 2025
Read Gaussian Process Surrogate Models for Efficient Estimation of Structural Response Distributions and Order Statistics by Vegard Flovik, Sebastian Winter, Christian Agrell (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-01242.txt.
Introduction
Engineers must prove a structure can take rare, harsh weather without building it needlessly strong. Vegard Flovik, Sebastian Winter, and Christian Agrell offer a cheaper way to run those proofs in this 2025 paper. Full physics simulations give rich detail but cost so much time that only a few weather cases can be tried. Safety checks, though, need the full spread of what weather can do.
Their fix is a stand-in model, called a Gaussian process surrogate, trained on a small set of full runs. The stand-in then predicts the whole spread of the structure's response directly. They apply it to a service check that estimates a load level passed only about a hundred times in a structure's life. The method could let teams test far more weather cases for the same cost.
Catalog record
| CREATOR | Vegard Flovik, Sebastian Winter, Christian Agrell |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 21 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-01242
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Gaussian Process Surrogate Models for Efficient Estimation of Structural Response Distributions and Order Statistics Vegard Flovik, Sebastian Winter, Christian Agrell Abstract Engineering disciplines often rely on extensive simulations to ensure that structures are designed to withstand harsh conditions while avoiding over-engineering for unlikely scenarios. Assessments such as Serviceability Limit State (SLS) involve evaluating weather events, including estimating loads not expected to be exceeded more than a specified number of times (e.g., 100) throughout the structure’s design lifetime. Although physics-based simulations provide robust and detailed insights, they are computationally expensive, making it challenging to generate statistically valid representations of a wide range of weather conditions. To address these challenges, we propose an approach using Gaussian Process (GP) surrogate models trained on a limited set of simulation outputs to directly generate the structural response distribution. We apply this method to an SLS assessment for estimating the order statistics Y 100 Y_{100} , representing the 100th highest response, of a structure exposed to 25 years of historical weather observations. Our results indicate that the GP surrogate models provide comparable results to full simulations but at a fraction of the computational cost. I Introduction Accurate estimation of structural responses under diverse weather conditions is influenced by both the variability of the weather environment (e.g., waves, wind, currents) and the variability of the structural response in a given random weather state. For precise long-term estimation, it is essential to consider both these variabilities. Order statistics, which involve analyzing specific ranked values within a dataset, are particularly useful in this context. These statistics can involve extreme values like the maximum or the minimum, as well as other values such as the 100th largest response. By examining these ranked values, order statistics provide valuable insights into the behavior of structures under various conditions, which is crucial for both reliability and serviceability assessments. While traditional physics-based simulation methods can calculate order statistics, this is often impractical due to the computational expense. This is especially true when dealing with long time periods, such as 25 or 100 years, which are typically used in the design of structures ( Wang et al. 2022 ) . A common practice in the engineering field is thus to use surrogate models, which approximate the results of high-fidelity simulations. These models, such as Gaussian Process (GP) models, can achieve similar accuracy with significantly reduced computational cost ( Samadian et al. 2024 ) . In this paper, we propose a method for creating GP-based surrogate models suitable for order statistics calculation. Our approach assumes that the structural characteristics remain constant during the studied timeframe, which is a common simplification in practical structural response simulations ( DNV 2019 ) . Our method introduces several aspects that distinguish it from existing methods. Specifically, we do not use surrogate models to estimate the structural responses directly. Instead, we estimate the parameters of the structural response distribution. This allows us to generate samples from the predicted distribution, enabling efficient calculation of order statistics without the need for extensive simulations. Additionally, our approach is designed to work with stochastic simulators where both the responses and the number of data points returned vary stochastically. Our method is particularly valuable for Serviceability Limit State (SLS) calculations ( DNV 2021 ) , where the evaluation of structural responses under a wide range of weather conditions is crucial but difficult to achieve with traditional methods like environmental contours ( Vanem et al. 2020 ) . To demonstrate our method, we conducted an SLS assessment estimating the 100th largest response ( Y_{100} ) for a structure exposed to 25-years worth of historical weather observations. This proof-of-concept uses a simplified stochastic simulation model that balances realistic dynamics and computational efficiency. We benchmark our method against a brute-force approach that calculates order statistics directly using the simulator. Our method showed comparable results at a fraction of the computational cost. II Problem Statement and Approach The specific problem addressed in this paper is the need for an efficient and accurate method to estimate the order statistics, Y_{k} , representing the k^{\text{th}} largest response within a selected time interval. For systems where the response is stochastic, this is challenging using traditional methods due to the inherent variability of the responses, which would require a high number of simulations to capture accurately. Our proposed method maps weather data inputs to predicted distributions of structural responses using a surrogate model, and then generates data to mimic the simulator output. This enables efficient estimation of selected order statistics, effectively bypassing the need for generating the structural responses using a simulator. Our approach is inspired by Winter et al. 2025 , which uses a Gaussian Process to model the parameters of the output distribution. Here, we extend this method by not only modeling the distributional parameters, but also generating realizations of the predicted structural response from the predictive distributions. The simulator is considered to be a stochastic black-box function, represented by \mathrm{sim}(\mathbf{x})\to[R_{1},\dots,R_{L|\mathbf{x}}], (1) where each R_{i} represents the response within a certain time interval, as explained in further detail in Section III.1.1 . The number of values returned by the simulator, L|\mathbf{x} , is a random variable conditional on \mathbf{x} . This means that both the responses R_{i} and the count L are stochastic outputs of the simulator. We assume outputs of the simulator at a point \mathbf{x} are samples from a distribution R|\theta_{R}(\mathbf{x}) , governed by the underlying physics of the system, where \theta_{R}(\mathbf{x}) are the parameters of the distribution. For example, if R is a Gumbel distribution, then \theta_{R}(\mathbf{x})=(\textit{location}(\mathbf{x}),\textit{scale}(\mathbf{x})) . In other words, we assume a fixed distribution type with unique parametrization at each \mathbf{x} . Producing the surrogate model’s estimate of a single \mathrm{sim}(\mathbf{x}) run works as follows: 1. Use the Gaussian Process to map \mathbf{x}\to\theta_{R},L . 2. Create the distribution R using the parameters \theta_{R} . 3. Generate a sample from L|\mathbf{x} , then generate L samples from distribution R , representing the output of the simulation model. While this mapping could be performed with many different models, using a Gaussian Process allows us to quantify the uncertainty in our estimation, as well as propagating uncertainty about the true surrogate model to our estimates of the order statistics Y_{k} . The GP model assumes that the function mapping inputs to outputs is a realization of a Gaussian process, defined by its mean function and covariance function, which encodes certain assumptions about the function we aim to predict, such as smoothness properties or periodicity. In this study, we use the Matérn covariance function, which is suitable for modeling functions with varying smoothness ( Williams and Rasmussen 2006 ) . Further details on the simulation model, surrogate model, and quantities of interest calculation are covered in the following sections. III Methods This section details the application of our approach to a proof-of-concept use-case. III.1 Simulation model overview The simulator used in this study takes weather observations as input, specifically significant wave height, H_{s} , peak wave period T_{p} , and wind speed V_{w} , to calculate the structural response of a marine structure. We use real weather observations collected from 1979 to 2015, spanning slightly over 36 years. Each observation represents the average conditions experienced over one hour. The simulation involves