Seeded Topology Optimization for Commercial Foundry Integrated Photonics
Jacob M. Hiesener, C. Alex Kaylor, Joshua J. Wong, Prankush Agarwal, Stephen E. Ralph · 2025
Read Seeded Topology Optimization for Commercial Foundry Integrated Photonics by Jacob M. Hiesener, C. Alex Kaylor, Joshua J. Wong, Prankush Agarwal, Stephen E. Ralph (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-00199.txt.
Introduction
Jacob Hiesener and co-authors present a 2025 paper on designing tiny light circuits that factories can actually build. Computer design can invent shapes that guide light well in simulation but break factory rules. Their method starts the search from a seed shape and applies blurring plus a rule-check fix, so results stay buildable.
In a broad test on one device type, most seeded designs passed factory rules, while few traditional designs did. The team applied the method to four devices, from mode sorters to a mirror. Measured losses dropped sharply in the built devices. The approach makes inverse design a practical two-step path for foundry photonics.
Catalog record
| CREATOR | Jacob M. Hiesener, C. Alex Kaylor, Joshua J. Wong, Prankush Agarwal, Stephen E. Ralph |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 61 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-00199
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Seeded Topology Optimization for Commercial Foundry Integrated Photonics Jacob M. Hiesener, C. Alex Kaylor, Joshua J. Wong, Prankush Agarwal, Stephen E. Ralph Abstract We present a seeded topology optimization methodology for integrated photonic devices fabricated on foundry platforms that yields improved performance compared to traditional topology optimization. We employ blurring filters and a design rule check correction algorithm to more readily meet fabrication constraints, resulting in devices with fewer artifacts and improved correlation between simulation and measurements. A statistical study is performed on a 2D modal multiplexer, revealing that 87% of devices optimized using this strategy conform to foundry constraints, compared to 13% of devices optimized using traditional TO. We apply seeded topology optimization to an ultra-compact TE modal multiplexer, a TE mode converter, a polarization rotator, and a high-contrast grating reflector. Using this optimization strategy, the measured insertion loss of the TE mode converter was reduced from < 1.50 dB to < 0.64 dB, and the measured TE 1 insertion loss of the TE modal multiplexer was reduced from < 3.95 dB to < 1.38 dB over C-band. This approach enables a two-step inverse design process, merging of physics-informed design strategies with inverse design, and ensures strict compliance with foundry constraints throughout optimization. Preprint: AIP/123-QED I Introduction Inverse design is a rapidly evolving method that is used in the design and optimization of integrated photonic devices to create compact structures with record performance that exploit non-intuitive geometries. Density-based topology optimization (TO) is a flexible form of inverse design that allows each voxel of a design (the design parameters) to continuously evolve between two or more materials towards an optimal device topology based on user defined constraints [ 1 , 2 , 3 , 4 , 5 ] . In density-based TO, two or more Maxwell simulations are performed each iteration to determine the gradient(s) of one or more user-specified figures of merit (FOM) with respect to all design parameters using the adjoint variable method [ 6 , 1 ] . The gradients for each FOM are linearly combined to update the design region toward a locally optimum topology. Devices designed for fabrication at a commercial foundry are readily manufactured at high volume after a successful validation process. This ability to scale is achieved by the requirement that devices conform to stringent design rules checks (DRC) to ensure accurate fabrication with high yield [ 7 ] . We can exploit the gradient descent method used in TO by generating gradients that iterate the design to a condition where design rules are met. In our traditional TO pipeline, we have previously implemented algorithms that calculate gradients to meet geometric linewidth constraints (GLC) and area constraints (AC), which are then linearly combined with the FOM gradient each iteration [ 8 ] . In traditional TO methodologies, the design parameters are initially gray-scale, i.e., allowed to take on any material value between the two or more materials available on that layer in the material stack. However, to accurately detect DRC violations, the device must be sufficiently binary (i.e., every voxel is close to 0 (void) or 1 (solid)), making it challenging to effectively apply DRC constraints. When binarizing the design parameters, a high-performing local optimum in the gray-scale phase of the optimization may not translate to a high-performing local optimum binary topology. Gradient-based optimizers are known to get trapped in local minima valleys or saddle points, which limits the performance achievable through inverse design [ 9 , 10 , 11 ] . This effect is amplified when fabrication-based constraints are included in the optimization, as conflicting objectives and constraints (FOM vs. AC/GLC) may cause the optimizer to stall when evolving the geometry to satisfy DRC results in a drop in performance [ 12 , 13 ] . Hence, there is a need for a modified topology optimization algorithm that maintains device fabricability while exploring the local design space around a functional seed geometry. In this work, we present a seeded TO methodology in which a known functional device geometry, the seed, is iteratively processed and optimized using density-based TO. We demonstrate improved performance compared to traditional TO or conventionally designed seed devices, all designed for a commercial foundry. A limited blurring filter is applied to enable perturbation of the topology such that the design space around the seed can be explored. We develop a DRC correction algorithm that is catered to the seeded TO process, which efficiently resolves foundry constraints while allowing a nested TO stage to improve device performance. While traditional TO has the potential to discover completely novel geometries, seeded TO focuses efforts to create strictly fabricable devices. We note that the seed can originate from physics-based conventional design strategies. One example of this is the seeded optimization of high-contrast gratings (HCGs) originally designed using parameter optimization [ 14 , 15 ] . Shape optimization is a similar inverse design methodology in which a user defines a boundary that is adjusted throughout optimization to maximize performance [ 16 ] . Previous work has explored seeding shape optimization with a physics-informed initial structure for multimode interferometer or metasurface design [ 17 , 18 ] . While shape optimization restricts the device topology, allowing for strict enforcement of DRC, our design methodology enables changes in the device topology (i.e., elimination and creation of holes/islands) and includes a DRC correction algorithm that provides more control over minimum linewidths and areas throughout the topology. We apply seeded TO to foundry-fabricated inverse-designed devices and present an improved design pipeline that utilizes the coarse global optimization features of density-based TO followed by the fine, local optimization capability of seeded TO. II Traditional Topology Optimization Overview Density-based TO parameterizes the design region such that each voxel can vary between "solid" (high index material) and "void" (low index material) between the two or more materials available on that layer. Typically, every voxel in the design region is initialized to 0.5 or random noise between 0 and 1, meaning the permittivity is between the solid (1) and the void (0), so each voxel can evolve to either. The user specifies the design region lateral dimensions, the location and size of all optical input and output ports (typically waveguides butt-coupling to a fiber is another example), sources and monitors, and formulates one or more FOMs to minimize. Our unique solver is a hybrid time/frequency-domain adjoint-variable method that readily enables solutions across a wide spectrum via the open-source finite-difference time-domain (FDTD) Maxwell solver MEEP [ 19 ] . This method allows for the inclusion of multiple FOMs for a single device and enables constraint-based TO [ 8 ] . We formulate TO as a multi-objective minimization problem with N objective functions (f_{1},...,f_{N}) subject to Maxwell’s equations at M frequency points, bounds for the design parameters (\rho) , and K constraint functions (g_{1},...,g_{K}) : \begin{matrix}\min_{\rho}\left[\displaystyle\sum\limits_{n=1}^{N}\bar{g}_{n}\big(f_{n}(\mathbf{E}),\mathbf{q}_{n}\big)+\sum\limits_{k=1}^{K}\bar{g}_{N+k}\big(g_{k}(\rho),\mathbf{q}_{N+k}\big)\right]\\ n\in\left\{1,...,N\right\},\ k\in\{1,...,K\}\\ \text{s.t. }\ \nabla\times\frac{1}{\mu}\nabla\times\mathbf{E}-\omega_{m}^{2}\mathbf{\varepsilon}(\rho)\mathbf{E}=\ -j\omega_{m}\mathbf{J}\\ m\in\left\{1,2,...,M\right\}\\ 0\leq\rho\leq 1&\ \end{matrix} (1) where \bar{g}_{i},\ i\in\{1,...,N+K\} are differentiable spline-based scaling functions applied to both the objectives and the constraints that are generated using a user defined list of bounds referred to as physical programming bounds ( \mathbf{q} ) [ 20 , 21 ] . The returns of each objective/constraint are mapped such that they are optimized on a unified scale,