Graded Index Couplers for Next Generation Chip-to-Chip and Fiber-to-Chip Photonic Packaging Journal: oe Publication type: Research Article
Drew Weninger \authormark 1, 4, Christian Duessel \authormark 1,4, Samuel Serna \authormark 3, Lionel Kimerling \authormark 1,4, and Anuradha Agarwal \authormark 2,4 · 2025
Read Graded Index Couplers for Next Generation Chip-to-Chip and Fiber-to-Chip Photonic Packaging Journal: oe Publication type: Research Article by Drew Weninger \authormark 1, 4, Christian Duessel \authormark 1,4, Samuel Serna \authormark 3, Lionel Kimerling \authormark 1,4, and Anuradha Agarwal \authormark 2,4 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-00121.txt.
Introduction
Drew Weninger and four co-authors design a coupler for linking light between chips and fibers. Their 2025 paper serves co-packaged optics, where light and electronic chips share one package. Such packages aim at huge data rates for data centers. Scaling needs many light channels, yet fiber arrays and hand alignment hold that back.
Their coupler uses a graded-index lens plus a fading-field link to pass light vertically between chips. The design allows flip-chip assembly with no active alignment. Simulations show losses under three tenths of a decibel across an eleven-micron gap. Tolerances for placement error span a few microns, and the working band is wide. The results suggest a path to dense, low-loss optical packaging.
Catalog record
| CREATOR | Drew Weninger \authormark 1, 4, Christian Duessel \authormark 1,4, Samuel Serna \authormark 3, Lionel Kimerling \authormark 1,4, and Anuradha Agarwal \authormark 2,4 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 55 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-00121
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Graded Index Couplers for Next Generation Chip-to-Chip and Fiber-to-Chip Photonic Packaging Journal: oe Publication type: Research Article Drew Weninger \authormark 1, 4, Christian Duessel \authormark 1,4, Samuel Serna \authormark 3, Lionel Kimerling \authormark 1,4, and Anuradha Agarwal \authormark 2,4 Abstract The transition towards designs which co-package electronic and photonic die together in data center switch packages has created a scaling path to Petabyte per second (Pbps) input/output (I/O) in such systems. In a co-packaged design, the scaling of bandwidth, cost, and energy will be governed by the number of optical I/O channels and the data rate per channel. While optical communication provide an opportunity to exploit wavelength division multiplexing (WDM) to scale data rate, the limited 127 μ \mu m pitch of V-groove based single mode fiber arrays and the use of active alignment and bonding for their packaging present challenges to scaling the number of optical channels. Flip-chip optical couplers which allow for low loss, broadband operation and automated passive assembly represent a solution for continued scaling. In this paper, we propose a novel scheme to vertically couple between silicon based waveguides on separate chips using graded index (GRIN) couplers in combination with an evanescent coupler. Simulation results using a 3D Finite-Difference Time-Domain (FDTD) solver are presented, demonstrating coupling losses below 0.27 dB for a chip-to-chip gap of 11 μ \mu m; 1-dB vertical and lateral alignment tolerances of approximately 2.38 μ \mu m and ± \pm 2.24 μ \mu m, respectively; and a greater than 360 nm 1-dB bandwidth. These results demonstrate the potential of our coupler as a universal interface in future co-packaged optics systems. 1 Introduction Silicon photonic integrated circuits (Si-PICs) have seen significant advancement over the past 40 years, highlighted by their rise to dominance as data center interconnects [ 1 ] and the novel application of Si-PICs as biochemical sensors [ 2 ] , in LIDAR [ 3 ] , photonic switching [ 4 ] , photonic computing [ 5 ] , and even chip based 3D printing [ 6 ] . However, the scaling of optical input/output (I/O) remains a significant manufacturing challenge, underscored photonic packaging, assembly, and testing occupying 70-80% of the total cost of Si-PIC manufacturing [ 7 ] . One of the primary barriers to optical I/O scaling is the use of active alignment and bonding of V-groove based single mode fiber (SMF) arrays to Si-PICs using UV-curable epoxies, increasing cost and limiting throughput. Not only are current optical packaging methods costly, but they are severely limited in terms of pitch - SMF arrays operating near datacom (1310 nm) or telecom (1550 nm) wavelengths have minimum pitches of 127 \mu m, meaning a maximum density of only 8 fibers/mm is possible. The assembly challenge is especially pertinent to co-packaged optics (CPO) systems, which may require > 10 3 SMFs to scale to the Pbps package I/O data rates by 2035 as required by current CPO trends [ 8 ] . In light of these packaging and assembly related problems, we have developed and patented [ 9 ] an optical coupling solution based on integrated GRIN lenses and evanescent couplers which can be used for flip-chip (i.e. chip-to-chip) connections, analogous to the electrical solder joint. Moreover, this optical coupling solution can be simultaneously used for fiber-to-chip coupling and packaged alongside electrical back-end-of-line (BEOL) interconnects. An example of how this can be incorporated in a CPO system layout is shown in Fig. 1 . This study focuses on the design and simulation of the GRIN coupler in the context of fiber-to-chip and chip-to-chip coupling. The simulations evaluated the coupling loss, 1-dB and 3-dB misalignment tolerances, 1-dB wavelength tolerance, and the fabrication tolerances of such a design. Moreover, Section 1.1 describes the operational principle and novelty compared to prior designs, Section 2 depicts the systems constraints and simulation setup, Section 3 presents the collected data, and Section 4 provides takeaways and a comparison to similar designs. (a) (b) Figure 1: An example of the GRIN coupler deployed in a co-packaged optics system. In 1(a) , a 3D view shows light entering the edge of a glass package substrate using a GRIN fiber-to-chip coupler and being transferred to a Si-PIC using a GRIN chip-to-chip coupler. In 1(b) , a 2D cross section shows the simultaneous optical and electrical fanout occurring between the ASIC, a single Si-PIC, and a single fiber array which is enabled by the GRIN coupler. The images above were adapted from [ 10 ] to add the GRIN lens element. 1.1 Graded index (GRIN) optical couplers The basis for our GRIN coupler design involves using silicon oxynitride (Si x O y N z , abbreviated SiON for the remainder of this report) layers with a GRIN profile to vertically focus, and a lens and taper combination to horizontally focus the incoming optical mode, as shown in Fig. 2 . Our design builds on prior efforts from [ 11 , 12 ] and is similar to the variations found in [ 13 , 14 , 15 ] . However, our design is distinct from these in several ways. First, it is intended for coupling between two separate chips or from interposer to chip (inter-chip coupling) in addition to fiber-to-chip coupling. By using a GRIN coupler for chip-to-chip coupling, we can increase the allowable vertical gap between chips by an order of magnitude compared to other types of chip-to-chip couplers such as evanescent, grating, or edge based methods. An inter-chip gap > 10 \mu m will allow for the integration of electrical connections such as Cu \mu -pillar bumps without the need for fabricating them in a trench. Moreover, this can be accomplished without sacrificing the ability to process GRIN couplers in parallel at the wafer scale, unlike couplers reliant on TPP processes which are fabricated serially. The goal of these couplers will be to increase lateral 1-dB alignment tolerance beyond the capability of the automated pick-and-place die bonders found in high volume manufacturing so that passive assembly can be utilized. Widening alignment tolerances to enable passive assembly of optical and electrical components directly equates to faster assembly speeds and lower costs. The second novel aspect of our design is the addition of an evanescent coupling element after the GRIN lens, to allow for coupling directly to standard 220 nm SiN or 220 nm SOI waveguides, or other desirable material platforms such as InP or LiNbO 3 . By integrating an evanescent coupling element, not only can the input and output waveguide material be customized, but the GRIN lens can be deposited in the back-end-of-line (BEOL) using only low-temperature plasma enhanced chemical vapor deposition (PECVD) processes ( < 350°C) with no additional annealing. In addition, with minimum SiON feature sizes as large as 500 nm, the GRIN coupler can be patterned using more mature technology nodes such as i-line (365 nm) photolithography with standard reactive ion etching (RIE). The aforementioned processes also maintain compatibility with microelectronic foundry tools used in CMOS process flows, leading to a decrease in fabrication complexity, and thus cost. Finally, by providing an interface for both chip-to-chip and fiber-to-chip coupling, one which is material agnostic to the input and output waveguides and can be added in the BEOL, the