Silicon photonic modulator circuit with programmable intensity and phase modulation response
Hong Deng, Yu Zhang, Xiangfeng Chen, Wim Bogaerts · 2025
Read Silicon photonic modulator circuit with programmable intensity and phase modulation response by Hong Deng, Yu Zhang, Xiangfeng Chen, Wim Bogaerts (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-20300.txt.
Introduction
Hong Deng and co-authors design a programmable light modulator on a silicon chip in a 2025 paper. Modulators stamp an electrical signal onto a light carrier for optical communication, but fixed designs suit only some uses and suffer from fabrication flaws. Their circuit can be tuned after manufacture to give either brightness or phase modulation as needed.
The team demonstrates the idea with two modulator types on a silicon photonics platform. Tests showed precise control over response shape and linearity beyond what standard designs reach, and built-in monitors let the circuit calibrate itself. Because the concept wraps around existing phase shifter designs, it can drop into larger circuits. Possible uses span communications, LiDAR, and microwave photonics.
Catalog record
| CREATOR | Hong Deng, Yu Zhang, Xiangfeng Chen, Wim Bogaerts |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 34 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-20300
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Silicon photonic modulator circuit with programmable intensity and phase modulation response Hong Deng, Yu Zhang, Xiangfeng Chen, Wim Bogaerts Abstract Electro-optical modulators are essential components in optical communication systems. They encode an electrical waveform onto an optical carrier. However, their performance is often limited by inherent electro-optic processes and imperfections in existing integrated designs, which limit their adaptability to diverse applications. This paper presents a circuit-level programmable modulator design that addresses these challenges. The proposed modulator can generate both intensity and phase modulation, optimizing performance without altering the underlying design or constraining platform limitations. We explain and demonstrate the principle with both carrier depletion-based modulators and SiGe electro-absorption modulators on a silicon photonic platform. Experiments demonstrate precise control and optimization capabilities surpassing those of traditional modulator designs, marking a significant leap forward in adaptability and performance enhancement across intensity, phase, and modulation linearity, enabled by programmable photonics. In combination with on-chip monitors, our circuit can be self-calibrating. This programmable modulator circuit concept can be applied to modulators in different platforms, incorporating existing phase shifter designs, and act as a drop-in replacement in more complex circuits. It has the potential to be widely used in optical communication, LiDAR, microwave photonics, and other systems, meeting the increasing demands of various applications. keywords Silicon photonics, integrated photonics, electro-optical modulator 1 Introduction Electro-optical (E/O) modulators play an important role in integrated photonic systems, converting microwave signals into the optical domain by modulating the waveform onto the phase and/or amplitude of an optical carrier wave Reed et al 2010 . As photonic chip technologies are moving beyond the field of optical fiber communication, and into applications for optical sensing Cheng et al 2023 , LiDAR Sayyah et al 2022 , and microwave signal processing (so-called microwave photonic systems) Feng et al 2024 , the requirements on the optical modulators are also changing rapidly, including, but not limited to, larger modulation bandwidths, higher modulation efficiencies, strong linearity, and a ”pure” modulation response Thomson et al 2016 ; Shekhar et al 2024 . Various approaches have been proposed to achieve E/O modulators in photonic integrated circuits. For instance, in most mature silicon photonic platforms, the commonly used modulators are based on waveguides with embedded pn junctions, which affect the propagation of light through the free carrier dispersion effect. These pn junctions can be embedded in an interferometric circuit to form microring resonator modulators (MRM) and traveling-wave Mach-Zehnder modulators (TWMZM). MRMs normally have a larger electrical modulation bandwidth Li et al 2020 , but can only work for specific wavelengths, and also suffer from thermal drift. TWMZMs on the other hand, can be operated over a wide wavelength range, but take up a large footprint and suffer from a relatively low electrical bandwidth. Still, with a co-designed and co-packaged modulator driver, a TWMZM can also reach a bandwidth higher than 67\text{\,}\mathrm{G}\mathrm{H}\mathrm{z} Li et al 2023 . In parallel with pushing the bandwidth, various approaches to improve the linearity of these MRMs and TWMZMs have been pursued Chen et al 2020 ; Yu et al 2020 ; Bottenfield et al 2019 , using specifically-targeted custom-designed modulators. Good linearity, where the modulator does not introduce higher harmonics and nonlinear distortion of the signal, is very desirable in analog signal processing applications such as microwave photonics. Spectrum shaping is also proposed to improve the linearity of the system, but this process is quite complicated Liu et al 2021 ; Daulay et al 2022 ; Guo et al 2021 . Apart from these carrier dispersion-based modulators mentioned above, some silicon photonics platforms also offer SiGe electro-absorption modulators (EAM) based on the Franz-Keldysh effect Ferraro et al 2023 . These devices typically have a much reduced footprint and larger modulation bandwidth. Alternative E/O modulators, such as InP (based on Franz-Keldysh or Pockels effect) Pintus et al 2019 , thin film {}\mathrm{LiNbO}{\vphantom{\mathrm{X}}}_{\vphantom{\mathrm{2}}\smash[t]{\mathrm{3}}}^{\vphantom{\smash[t]{\mathrm{2}}}\hphantom{\mathrm{3}}\mathrm{}} on insulator (LNOI) Wang et al 2018 ; Vanackere et al 2023 , thin-film {}\mathrm{BaTiO}{\vphantom{\mathrm{X}}}_{\vphantom{\mathrm{2}}\smash[t]{\mathrm{3}}}^{\vphantom{\smash[t]{\mathrm{2}}}\hphantom{\mathrm{3}}\mathrm{}} Eltes et al 2019 (Pockels effect), polymer modulators Taghavi et al 2022 , and silicon-organic hybrids Alloatti2014100GHzModulator , can also been heterogeneously integrated onto silicon photonic circuits, with wafer-to-wafer, die-to-wafer or die-to-die bonding, or transfer-printing technologies Rahim et al 2021 . These modulators also show promising modulation performance. However, such modulator designs are mainly explored for larger modulation bandwidth, driven by the needs for high-speed digital optical interconnects. Their performance metrics for analog signals, such as spurious intensity or phase modulation, modulation linearity and spurious-free dynamic range (SFDR), are usually far from optimal. None of these many E/O modulation mechanisms is perfect, and as different applications impose their own requirements, it is not straightforward to meet them within a single device. In this paper, we present a programmable modulator design, which takes existing E/O modulators and embeds them into a fully tunable Mach-Zehnder interferometer (MZI) circuit. By adjusting the static transmission response of this MZI, we can compensate for the imperfections in the electro-optic response of the embedded modulator, and achieve an improved modulation response curve, lower insertion loss, higher modulation efficiency, or higher SFDR, depending on the requirements of the application. Furthermore, if the embedded modulator component provides a large phase modulation, the programmable modulator circuit can be adjusted to perform as an intensity modulator, a phase modulator, or a combination of both modulation formats. Previously, we already described the static (DC) simulation results for achieving a pure phase modulation with a pn junction based modulator Deng and Bogaerts 2019 , and showed how this modulator can perform certain microwave photonic signal processing functions Deng2023Single-ChipSignals . In this paper, we present a detailed experimental demonstration with pn modulators and SiGe EAMs, supported by analytical analysis. Notably, experiments with pn modulators achieve exceptional linearity (SFDR up to 124.6\text{\,}\mathrm{d}\mathrm{B}\mathrm{H}\mathrm{z}^{2/3} ), alongside pure phase modulation (spurious intensity suppressed by 20\text{\,}\mathrm{d}\mathrm{B} ) and high extinction ( 38\text{\,}\mathrm{d}\mathrm{B} ), across various operating conditions. In addition, this programmable modulator circuit concept can be applied to all existing platforms and E/O modulator technologies, and we show this with an additional numerical simulation and analysis of a Silicon MRM. The performance of the system can be roughly predicted from the DC response of the embedded modulator. The DC response (optical phase and amplitude transmission as function of applied voltage) can be directly characterized within our programmable modulator circuit, even in cases where the detailed design and performance specifications of the embedded modulator are not fully available up-front. With the integration of on-chip thermal phase shifters and monitor photodetectors, the proposed modulator circuit is self-calibrating. 2 Results Figure 1: Schematic of the programmable modulator. The embedded high-speed modulator can be travelling wave pn modulator, SiGe EAM modulator, microring modulator, and other modulators on silicon photonic platform or other platforms. The schematic of our programmable modulator is shown in Fig. 1 . As can be seen, the programmable modulator is an MZI circuit formed by two tunable couplers, a high-speed modulator in one arm, a static phase shifter in the other arm, and a tap monitor. The tunable coupler itself is also an MZI consisting of two 50:50 multimode interferometer (MMI) couplers and a static phase shifter. By adjusting the phase difference between the two arms of a tunable coupler, we can adjust the power splitting