Multimode operation of a superconducting nanowire switch in the nanosecond regime

Zoltán Scherübl, Mátyás Kocsis, Tosson Elalaily, Lőrinc Kupás, Martin Berke, Gergő Fülöp, Thomas Kanne, Karl Berggren, Jesper Nygård, Szabolcs Csonka, Péter Makk · 2025

Read Multimode operation of a superconducting nanowire switch in the nanosecond regime by Zoltán Scherübl, Mátyás Kocsis, Tosson Elalaily, Lőrinc Kupás, Martin Berke, Gergő Fülöp, Thomas Kanne, Karl Berggren, Jesper Nygård, Szabolcs Csonka, Péter Makk (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-17980.txt.

Introduction

A superconducting nanowire switch can flip in a billionth of a second, and Zoltán Scherübl and co-authors found a second, faster way back, in work from twenty twenty-five. Gate pulses drive the aluminum wire while a microwave probe watches its state. The usual leak-driven flip to normal took one to two nanoseconds.

Return by leak lagged at ten to twenty. A quirk of the gate's charge storage offers a shortcut: the displacement surge drives the flip both ways. Return then took four to six nanoseconds. Fast, low-power superconducting logic gains a new trick, with thermal design the next lever.

Catalog record

CREATORZoltán Scherübl, Mátyás Kocsis, Tosson Elalaily, Lőrinc Kupás, Martin Berke, Gergő Fülöp, Thomas Kanne, Karl Berggren, Jesper Nygård, Szabolcs Csonka, Péter Makk
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE32 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-17980

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multimode operation of a superconducting nanowire switch in the nanosecond regime Zoltán Scherübl, Mátyás Kocsis, Tosson Elalaily, Lőrinc Kupás, Martin Berke, Gergő Fülöp, Thomas Kanne, Karl Berggren, Jesper Nygård, Szabolcs Csonka, Péter Makk Abstract Superconducting circuits are promising candidates for future computational architectures, however, practical applications require fast operation. Here, we demonstrate fast, gate-based switching of an Al nanowire-based superconducting switch in time-domain experiments. We apply voltage pulses on the gate while monitoring the microwave transmission of the device. Utilizing the usual leakage-based operation these measurements yield a fast, 1–2 ns switching time to the normal state, possibly limited by the bandwidth of our setup, and a 10–20 ns delay in the normal to superconducting transition. However, having a significant capacitance between the gate and the device allows for a novel operation, where the displacement current, induced by the fast gate pulses, drives the transition. The switching from superconducting to the normal state yields a similar fast timescale, while in the opposite direction the switching is significantly faster (4–6 ns) than the leakage based operation, which may be further improved by better thermal design. The measured short timescales and novel switching operation open the way for future fast and low-power-consumption applications. I Introduction In 2018 De Simoni et al. demonstrated a novel operation of a superconducting circuit, where the switching current of a narrow, fully metallic wire was suppressed and eventually quenched by applying a DC voltage on a nearby gate electrode [ 1 ] . This effect was termed gate-controlled supercurrent (GCS), and since then it was investigated intensively [ 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 ] . Such an all electrically driven, fully metallic, superconducting switch could be an important building block of superconducting computing structures [ 36 , 37 , 38 ] , since the superconducting state promises dissipationless operation, whereas the electrical control suggests a scalable architecture. However, for practical applications fast switching is required. Up to now two studies have investigated the switching speed and found \sim 90 ns [ 15 ] and \sim 25 ns [ 34 ] timescales, which were limited by their setup in both cases. In earlier works the GCS was explained by a purely electric-field-based effect [ 1 , 5 , 6 , 3 , 11 , 10 , 10 , 8 , 7 , 20 , 12 , 19 , 29 , 31 ] , but later works showed that the underlying mechanism in most cases is related to the leakage current in the substrate at high gate voltages [ 13 , 15 , 16 , 17 , 18 , 24 , 26 , 33 ] (see a detailed review of the field in Ref. [ 38 ] ). Although the speed of a pure electric field based switching is expected to be only limited by the superconducting gap, yielding up to close to THz operation speed [ 38 ] , but a leakage-based switching can be strongly limited by the large resistance of the leakage channel, stray capacitances and internal thermal timescales. Aside from the leakage-current-based mechanisms, having a non-negligible capacitance, C between the gate electrode and one of the contacts (see Fig. 1 a) allows for a change of the gate voltage to induce a current in the lead, called the displacement current, I_{\text{disp}}=C\cdot dV_{\text{g}}/dt , which can switch the device to the normal state if it exceeds the switching current. This displacement-current-based architecture could be used for low-dissipation classical computing, pulse generation in neuromorphic applications [ 39 , 40 , 41 , 42 ] or combined with the leakage current could be operated as a switch in quantum electronic devices [ 36 , 37 , 38 ] . In this paper we determine the switching times corresponding to both the leakage- and the displacement-current-driven switching mechanisms by measuring time-resolved RF transmission of a superconducting switch while different pulses were applied on the gate electrode. We show that in both cases the operation is limited by the normal to supra transition, which is 10–20 ns for the leakage-based and 4–6 ns with the displacement-current-based operation. The switching to normal state is 1–2 ns for both mechanisms, presumably limited by the bandwidth of our setup. The former switching is probably limited by thermal timescales in the system which could be optimized by proper system design. II Results and Discussion Our GCS device is based (see Fig. 1 a) on an InAs nanowire with an epitaxial Al shell (purple) [ 17 ] , where the 20-nm-thin Al shell serves as the superconducting wire. A gate electrode (green) is fabricated 40 nm from the wire by electron beam lithography. The wire is contacted in quasi-four-point geometry by Ti/Al leads (yellow and blue). The GCS effect in this system was previously demonstrated in Refs. 17 , 33 . The current leads (blue) are coupled to both RF and DC lines through on-board bias tees (gray dashed rectangles). The device was symmetrically current-biased to keep its potential fixed during biasing. The voltage probe leads (yellow) are connected only to DC lines. The gate electrode (green) is also connected to a bias tee to combine the DC gate voltage with fast pulses or continuous wave excitations. Figure 1: The device and the measurement setup a) the false-colored SEM image of the measured device along with the circuit diagram. The epitaxial Al shell of the InAs nanowire (purple) serves as the superconducting wire, contacted in a quasi-four-point geometry. Bias tees (gray rectangles) allow to combine DC and RF signals applied on the wire. The voltage drop across the wire is measured (yellow) to perform DC characterization. The side gate (green) is also connected to DC and RF sources to allow for fast pulsing. Due to the design (see Supp. Mat. I.), a substantial capacitance, C (in gray) is formed between gate electrode and ohmic contacts. b) RF measurement setup. The cyan box corresponds to the same on panel a). The effect of the gate pulses was detected as the modulation of the transmission of a 3.95 GHz signal through the device, which was measured by a lock-in amplifier (LI) after downconversion using IQ mixers, hence both quadratures ( V_{\text{I}} and V_{\text{Q}} ) of the signal were measured. To investigate the device response to fast gate operations we have studied the time dependence of a high-frequency signal transmitted through the device, which was measured the following way (the RF measurement setup is illustrated in Fig. 1 b). A fixed f_{\text{LO1}}=3.95 GHz signal was applied on one of the current leads of the device and the output signal was measured after downconversion (using IQ mixers) with a second local oscillator (LO2) with frequency f_{\text{LO2}} . Two different measurement schemes were used, technique A (heterodyne): the transmitted signal was downconverted to a few hundred MHz (within the 600 MHz bandwidth of the Zurich Instruments (ZI) UHFLI,

Read the complete text