Rapid Parameter Inference with Uncertainty Quantification for a Radiological Plume Source Identification Problem

Christopher Edwards, Ralph C. Smith · 2025

Read Rapid Parameter Inference with Uncertainty Quantification for a Radiological Plume Source Identification Problem by Christopher Edwards, Ralph C. Smith (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-17492.txt.

Introduction

Christopher Edwards and Ralph Smith locate a radioactive release quickly, with honest uncertainty, in a 2025 study. After a nuclear accident or a dirty bomb, responders must find the source fast to direct cleanup and protect the public. Sensors downwind record radiation levels at a set time after a simulated instant release of an aerosol plume, and those readings must be inverted to a source position and strength.

Their inference runs rapidly while quantifying how sure the answer is. A fast point estimate without uncertainty could send crews to the wrong block; a distribution over sources guides a safer search.

Catalog record

CREATORChristopher Edwards, Ralph C. Smith
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE45 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-17492

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Rapid Parameter Inference with Uncertainty Quantification for a Radiological Plume Source Identification Problem Christopher Edwards, Ralph C. Smith Abstract In the event of a nuclear accident, or the detonation of a radiological dispersal device, quickly locating the source of the accident or blast is important for emergency response and environmental decontamination. At a specified time after a simulated instantaneous release of an aerosolized radioactive contaminant, measurements are recorded downwind from an array of radiation sensors. Neural networks are employed to infer the source release parameters in an accurate and rapid manner using sensor and mean wind speed data. We consider two neural network constructions that quantify the uncertainty of the predicted values; a categorical classification neural network and a Bayesian neural network. With the categorical classification neural network, we partition the spatial domain and treat each partition as a separate class for which we estimate the probability that it contains the true source location. In a Bayesian neural network, the weights and biases have a distribution rather than a single optimal value. With each evaluation, these distributions are sampled, yielding a different prediction with each evaluation. The trained Bayesian neural network is thus evaluated to construct posterior densities for the release parameters. Results are compared to Markov chain Monte Carlo (MCMC) results found using the Delayed Rejection Adaptive Metropolis Algorithm. The Bayesian neural network approach is generally much cheaper computationally than the MCMC approach as it relies on the computational cost of the neural network evaluation to generate posterior densities as opposed to the MCMC approach which depends on the computational expense of the transport and radiation detection models. keywords Bayesian Neural Network, Neural Network, Uncertainty Quantification, Source Localization, Bayesian, Inference 1 Introduction Radioactive contamination due to a nuclear accident, leaking radioactive waste, or a purposeful act, such as a radiological dispersal device, can have significant consequences. Contamination within a commercial distract of a large city could bring a devastating economic impact and pose a serious health risk to the surrounding population. Therefore, in the event of a nuclear accident, or a detonation of a radiological dispersal device, quickly locating the source of the release, as well as large spots of radioactive contamination, can save significant time and, consequently, money and resources during the environmental decontamination process, as well as prevent further propagation of deposited radioactive material by wind, rain, and even human transport. This work focuses on locating the source location of an instantaneous release of aerosolized radioactive material as well as estimating the amount of radioactive material released. Bayesian inference of the release location of a Gaussian plume of a contaminant or pollutant has been studied in previous investigations. Bayesian Markov chain Monte Carlo (MCMC) methods were employed in ( Borysiewicz et al, 2012 ) to infer the release location and release rate of a continuous release of a contaminant using concentration measurements recorded by detectors at the same height as the release. MCMC methods were also used in conjunction with mutual information to infer the release location of a continuous release of a chemical pollutant ( Schmidt et al, 2019 ) . In ( Pudykiewicz, 1998 ) , the author solves the adjoint tracer transport equation to estimate the source location of a nuclear release on a global scale using measurements from the global network of radiation monitoring stations. In ( Kopka et al, 2015 ; Kopka et al, 2016 ; Kopka and Wawrzynczak, 2018 ) , the authors utilized a sequential approximate Bayesian computation (S-ABC) to localize an atmospheric contamination source. The feasibility of utilizing neural networks for the forward transport model in localization algorithms was investigated in ( Wawrzynczak and Berendt-Marchel, 2019 ; Wawrzynczak and Berendt-Marchel, 2020 ) . In ( Edwards et al, to appear. ) , we developed a neural network method for real-time inference of a single radiological source without quantification of uncertainty. To address the goal of real-time inference of the release parameters of an instantaneous release, while also quantifying uncertainty, we propose the construction of a Bayesian neural network to infer the release parameters. The objective is to leverage the stochastic nature and speed of the Bayesian neural network to build predictive distributions by sampling the trained Bayesian neural network evaluations. In doing so, the computational cost of our approach depends on the computational expense of the Bayesian neural network evaluation rather than the computational cost of the transport model, as is typical for Bayesian MCMC approaches. We first construct a regression-based neural network model that predicts the release location and amount of mass released with no quantification of the uncertainty. This neural network provides a baseline for the other neural network models. The second neural network we construct is a categorical classification model, which utilizes the softmax activation function on its outputs to provide a basic estimate of the probability for the source location. This neural network provides a naive measure of the uncertainty. Finally, we construct a Bayesian regression-based neural network to account for the epistemic uncertainty inherent to the weights of the neural network. By accounting for the aleatoric (random) uncertainty inherent to the detector measurements, and propagating this uncertainty through the neural network model, we are able to construct densities for the source location and mass released. We compare the Bayesian neural network densities to those obtained from the Delayed Rejection Adaptive Metropolis Algorithm (DRAM) ( Haario et al, 2006 ) . A key difference in this problem, as compared to source localization problems with a continuous release of a contaminant, is the very short time frame for obtaining useful measurements with a fixed detector. In a continuous release, a stationary sensor can provide highly-informative, non-zero measurements over a long period of time. For an instantaneous release, the hazardous material is only released at a single time and hence can quickly be advected past the site of the detector. A challenge inherent to a radioactive release is that there exist multiple dispersions that can yield the same or similar radiation detector measurements due to the incidence of gamma radiation. Modeling the atmospheric transport of radioactive material after a radiological attack is generally performed using computational fluid dynamics (CFD) simulations, Gaussian plume models, or Lagrangian puff, or particle models ( Hummel and Ivan, 2017 ) . We note that RIMPUFF ( Thykier-Nielsen et al, 1999 ) and HOTSPOT ( Homann, 2005 ) are commonly used Gaussian puff and plume models used for rapid response to radiological dispersal devices (RDDs) due to their simplicity and fast computation time. Precomputed CFD simulations are also used for emergency response to radioactive dispersal devices in major cities. Reynolds-averaged Navier-Stokes (RANS) and Large eddy simulations (LES) are used for high fidelity computational fluid dynamics simulations of atmospheric dispersion of material in urban domains. To train our neural networks, we require a significant amount of data. Therefore we use a computationally inexpensive analytic model to compute the mean concentration of radioactive material at a given time and location. We compute the transport of an aerosolized Cs-137 contaminant for several release parameters (mass released, source location, wind speeds). We then compute detector responses for an array of stationary radiation detectors from the resulting dispersion of radioactive material using a ray-tracing model. Using the set

Read the complete text