High quality superconducting tantalum resonators with beta phase defects
Ritika Dhundhwal, Haoran Duan, Lucas Brauch, Soroush Arabi, Dirk Fuchs, Amir-Abbas Haghighirad, Alexander Welle, Florentine Scharwaechter, Sudip Pal, Marc Scheffler, José Palomo, Zaki Leghtas, Anil Murani, Horst Hahn, Jasmin Aghassi-Hagmann, Christian Kübel, Wulf Wulfhekel, Ioan M. Pop, Thomas Reisi · 2025
Read High quality superconducting tantalum resonators with beta phase defects by Ritika Dhundhwal, Haoran Duan, Lucas Brauch, Soroush Arabi, Dirk Fuchs, Amir-Abbas Haghighirad, Alexander Welle, Florentine Scharwaechter, Sudip Pal, Marc Scheffler, José Palomo, Zaki Leghtas, Anil Murani, Horst Hahn, Jasmin Aghassi-Hagmann, Christian Kübel, Wulf Wulfhekel, Ioan M. Pop, Thomas Reisi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-17247.txt.
Introduction
Ritika Dhundhwal and co-authors test whether the flawed beta phase of tantalum really ruins superconducting resonators. Qubit makers prize alpha-phase tantalum because the beta phase was blamed for microwave losses. Their 2025 paper builds lumped resonators that contain beta-phase inclusions near the metal and substrate boundary.
In the single-photon regime, these resonators reached internal quality factors in the millions. They even beat resonators showing no beta phase in X-ray checks. The result softens the case that any beta tantalum is fatal. It also hints that where the inclusions sit matters more than their mere presence. Quantum hardware teams get a more forgiving picture of a key material flaw.
Catalog record
| CREATOR | Ritika Dhundhwal, Haoran Duan, Lucas Brauch, Soroush Arabi, Dirk Fuchs, Amir-Abbas Haghighirad, Alexander Welle, Florentine Scharwaechter, Sudip Pal, Marc Scheffler, José Palomo, Zaki Leghtas, Anil Murani, Horst Hahn, Jasmin Aghassi-Hagmann, Christian Kübel, Wulf Wulfhekel, Ioan M. Pop, Thomas Reisi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-17247
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
High quality superconducting tantalum resonators with beta phase defects Preprint: AIP/123-QED Ritika Dhundhwal, Haoran Duan, Lucas Brauch, Soroush Arabi, Dirk Fuchs, Amir-Abbas Haghighirad, Alexander Welle, Florentine Scharwaechter, Sudip Pal, Marc Scheffler, José Palomo, Zaki Leghtas, Anil Murani, Horst Hahn, Jasmin Aghassi-Hagmann, Christian Kübel, Wulf Wulfhekel, Ioan M. Pop, Thomas Reisinger Abstract For practical superconducting quantum processors, orders of magnitude improvement in coherence is required, motivating efforts to optimize hardware design and explore new materials. Among the latter, the coherence of superconducting transmon qubits has been shown to improve by forming the qubit capacitor pads from α \alpha -tantalum, avoiding the meta-stable β \beta -phase that forms when depositing tantalum at room temperature, and has been previously identified to be a source of microwave losses. In this work, we show lumped element resonators containing β \beta -phase tantalum in the form of inclusions near the metal-substrate interface with internal quality factors ( Q i Q_{\text{i}} ) up to 5.0 ± ± 2.5 × 10 6 5.0\pm\pm 2.5\text{\times}{10}^{6} in the single photon regime. They outperform resonators with no sign of the β \beta -phase in x-ray diffraction and thermal quasi-particle loss. Our results indicate that small concentrations of β \beta -phase can be beneficial, enhancing critical magnetic fields and potentially, for improving coherence in tantalum based superconducting circuits. Superconducting circuits are a leading platform for quantum information processing Blais et al. 2021 and the last two decades have been marked by remarkable progress in qubit coherence times Krasnok et al. 2024 ; Krantz et al. 2019 . Scaled up circuits with tens of qubits have been used to successfully demonstrate key milestones such as quantum supremacy Arute et al. 2019 and error correction Sivak et al. 2023 . As a further example for the utilization of superconducting circuits, quantum-limited Josephson parametric amplifiers form key ingredients for high fidelity qubit readout and state preparation Aumentado 2020 . However, for solid-state macroscopic circuits, a major challenge faced by superconducting devices is decoherence Siddiqi 0 01 . In particular, dielectric loss is one of the major loss mechanisms in state-of-the-art hardware McRae et al. 2020 , which can be mitigated both by improving circuit design or the constituent materials de Leon et al. 2021 ; Chayanun et al. 2024 ; Tuokkola et al. 2024 . Recently, tantalum Place et al. 2021 ; Wang et al. 2022 has become a member of the exclusive group of materials with low dielectric loss tangent for quantum devices, challenging the performance of established platforms based on aluminum, niobium Tuokkola et al. 2024 ; Anferov et al. 2024 or titanium nitride Chang et al. 2013 ; Deng et al. 2023 . Record qubit lifetimes on the order of hundreds of microseconds have been demonstrated in transmon qubits composed of Ta capacitors shunting a standard Al/AlO x /Al junction Place et al. 2021 ; Wang et al. 2022 . However, the coherence in Ta-based circuits is highly dependent on deposition and fabrication process parameters. A distinctive feature of Ta thin films is the possible formation of a tetragonal \beta -phase Read and Altman 1965 , competing with the body centered cubic (BCC) bulk \alpha -phase. The latter has a superconducting transition temperature ( T_{\text{c}} ) of 4.4\text{\,}\mathrm{K} , while the meta-stable \beta -phase has a significantly lower T_{\text{c}} of 0.5\text{\,}\mathrm{K} Schwartz et al. 1972 . It can form when depositing on substrates at near room-temperature Navid and Hodge 2012 . The underlying cause for the coherence improvement in Ta devices remains a matter of intensive research and is most likely multi-faceted Ganjam et al. 5 01 . The improvement is often linked to the use of pure \alpha -phase Ta and then accredited to the stable, self-limiting surface oxide McLellan et al. 2023 ; Bal et al. 2024 . However, there is a large spread in the reported loss for Ta-based devices in the literature, possibly caused by variations in film microstructure. Figure 1: Crystallographic analysis of Ta films and images of resonator and 3D-waveguide used for microwave loss characterization. (a) X-ray diffractograms of Ta films grown on c-plane Al 2 O 3 . We use a Bruker high-resolution X-ray diffraction system in reflection, equipped with a (022) Ge monochromator for the characteristic K_{\alpha} line of a Cu X-ray source. The top panel (blue) shows a single Ta peak, denoted \alpha(222) , corresponding to the \alpha -phase growing with (111) orientation \parallel z direction; the \alpha(111) peak is suppressed due to the symmetry of the BCC crystal structure (Systematic absence). This film is referred to as single-phase film. The bottom panel (magenta) shows multiple Ta peaks corresponding to both \alpha - and \beta -phase growing with (110) \parallel z and (001) \parallel z orientation, respectively. This film is referred to as mixed-phase film. The narrow peaks visible at 20\text{\,}\mathrm{\SIUnitSymbolDegree} (bottom graph) and 65\text{\,}\mathrm{\SIUnitSymbolDegree} (both graphs) correspond to the diffraction of residual K_{\beta} X-rays by the sapphire substrate. (b) Automated Crystal Orientation Mapping (ACOM) of lamella extracted from single (top) and mixed-phase (bottom) films performed using a transmission electron microscope. The black areas correspond to the \beta -phase, while the other colors (except white) indicate the crystal orientation of the \alpha -phase in the x-direction. The color key for the \alpha -phase orientation is shown in the left-most bottom panel together with a schematic of the BCC unit cell. The gray regions beneath the films indicate the sapphire substrate. Middle and right bottom panels show the unit cell for \beta -phase Ta and sapphire, respectively. White color areas in the mixed-phase film indicate regions where the crystal orientation is not well defined. (c) Copper 3D-waveguide sample holder (closing lid not shown) and a mounted 7\times 7 mm 2 sapphire chip with three horseshoe style Ta resonators, similar to the one shown in the optical micrograph below it. In this work, we demonstrate single photon Q_{\text{i}} of 5.0\pm\pm 2.5\text{\times}{10}^{6} in microwave resonators fabricated from \beta -phase-containing Ta film. The volume fraction of the \beta -phase in the film is approximately 10\% , as determined from X-ray diffraction (XRD) data - see supplemental material (SM). We show that the low power Q_{\text{i}} of these resonators is higher than for ones composed of pure \alpha -phase Ta, even after aggressive post-fabrication cleaning in buffered-oxide etch (BOE) Lozano et al. 2024 . In order to correlate microwave loss to material properties of Ta films, we characterize the films with various material characterization tools such as XRD, four probe resistivity measurements, SQUID magnetometry, scanning tunneling microscopy (STM), scanning transmission electron microscopy (STEM) and scanning precession electron diffraction based automated crystal orientation mapping (ACOM) Kobler et al. 2013 . We conclude that controlling the \beta -phase concentration, while not necessarily aiming to eliminate it, is a promising route to further reducing loss in Ta-based quantum circuits, while also enhancing critical magnetic fields ( H_{c} ). In Fig. 1 (a,b) we characterize the two types of Ta film structures, for which we aim to compare possible effects on microwave loss. The different sets of sputtering parameters and sapphire substrate cleaning procedures are summarized in the SM. First, films that exhibit only \alpha -phase with (111) orientation are referred to as single-phase films. The second type of film consists of