Overview of the data acquisition system architecture for the DarkSide-20k experiment
\firstname Maria Adriana, \lastname Sabia, \fnsep on behalf of the DarkSide-20k collaboration · 2025
Read Overview of the data acquisition system architecture for the DarkSide-20k experiment by \firstname Maria Adriana, \lastname Sabia, \fnsep on behalf of the DarkSide-20k collaboration (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-15651.txt.
Introduction
Maria Adriana Sabia, writing on behalf of a large collaboration in 2025, describes the data system for a dark matter detector. The detector holds twenty tonnes of argon drawn from underground sources. Passing dark matter particles should scatter off argon nuclei and flash light. Custom sensors record those flashes across 2,720 channels.
The data system runs with no trigger, taking everything the sensors send. Simulations put the flow at three gigabytes per second. Dozens of digitizer units convert the signals. A first set of computers cuts the data down, and a second set assembles time slices for study. The paper lays out that chain in full. Such plumbing decides whether rare signals survive to analysis.
Catalog record
| CREATOR | \firstname Maria Adriana, \lastname Sabia, \fnsep on behalf of the DarkSide-20k collaboration |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-15651
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Overview of the data acquisition system architecture for the DarkSide-20k experiment \firstname Maria Adriana, \lastname Sabia, \fnsep on behalf of the DarkSide-20k collaboration Abstract The DarkSide-20k (DS-20k) detector is designed to directly search for dark matter by detecting weakly interacting massive particles (WIMPs) scattering off nuclei in a 20 tonnes target of low radioactivity Argon from underground sources, in a dual-phase time projection chamber (TPC). The scintillation light produced by these interactions is recorded by custom silicon photomultiplier (SiPMs) assemblies comprising the detector’s 2720 readout channels. The data acquisition system (DAQ) for the DS-20k experiment operates in a triggerless mode, handling the estimated 3 GB 3\text{\,}\mathrm{GB} flow of digitized data from MC simulation from the entire detector, dominated by the TPC. Signals are digitized by 48 commercial VX2745 CAEN 16 16 -bit, 125 M 125\text{\,}\mathrm{M} , high channel density waveform digitizers. This digitized data is then transferred to 24 Front-End Processor (FEP) machines for an initial data reduction stage. Subsequently, the processed data is sent to a separate set of Time Slice Processor (TSP) computers, where it is assembled into fixed-length time series for further analysis and storage for offline processing. 1 Introduction The nature of dark matter (DM) remains one of the most significant unresolved mysteries in contemporary physics. Numerous experiments have explored various hypotheses, but a definitive solution continues to elude researchers. Direct detection has emerged as a field of intense global interest among the diverse approaches. This method focuses on observing the exceedingly rare interactions of dark matter particles with regular matter. Liquid argon detectors have gained prominence among the many available technologies due to their exceptional pulse-shape discrimination based on the unique scintillation characteristics of argon PhysRevB.27.5279 ; BOULAY2006179 ; Adhikari_2021 and needed to distinguish electron recoils (ER) from nuclear recoils (NR). Based on that, the DarkSide-20k (DS-20k) experiment is committed to advancing the sensitivity of direct detection experiments to the level of the neutrino floor, a limit imposed by the unavoidable neutrino background inherent to current detection methods PhysRevLett.127.251802 . 2 DarkSide-20k experiment DS-20k is a massive liquid argon detector currently in construction at Laboratori Nazionali del Gran Sasso (LNGS), Italy, with leading sensitivity in the next decade in the DM mass range of 1\text{\,}\mathrm{G}\mathrm{e}\mathrm{V}\mathrm{/}\mathrm{c}^{2} to 10\text{\,}\mathrm{T}\mathrm{e}\mathrm{V}\mathrm{/}\mathrm{c}^{2} . The core of the detector is a double-phase time projection chamber (TPC) filled with 50\text{\,}\mathrm{t} of liquid argon ( 20\text{\,}\mathrm{t} fiducial), with a target instrumental background of < 0.3 events from neutrons and \sim 3 events from neutrinos in the DM region of interest, in 10 years of operations. The detector features a nested structure, formed by a ProtoDUNE-like membrane cryostat (Fig. 1 ) Montanari:2015pxz , enclosing the inner veto and the double-phase TPC. With a total volume of approximately 580\text{\,}\mathrm{m} of atmospheric argon (AAr), the cryostat acts both as an outer muon veto and thermal bath. Both the inner veto and the TPC are immersed in low-radioactivity underground argon (UAr) and separated from the AAr by a stainless steel vessel. The inner veto is filled with 36\text{\,}\mathrm{t} of liquid argon and helps at efficiently tagging neutrons. The latter constitute the source of background, as they produce a DM-like signal in the TPC. The expected interaction of a DM particle inside the TPC is a coherent elastic scattering off an argon nucleus, which can be detected via a combination of the prompt scintillation light (S1 signal) and the delayed signal due to the drift of the ionization electrons produced by the recoiling nucleus (S2 signal) Agnes:2015gu . Both signals are readout by Silicon Photomultiplier-based photodetectors located on the optical planes at the top and bottom of the TPC and provide energy information acerbi2024qualityassurancequalitycontrol . The S2 signal allows x - y position reconstruction with a few cm resolution and the drift time between S1 and S2 signals is proportional to the z position, allowing for full tridimensional event reconstruction. Figure 1 : (Left) Vertical section of the DarkSide-20k detector with the ProtoDUNE-like membrane cryostat and the stainless steel vessel containing the TPC. (Right) Picture of the cryostat assembled at LNGS. The need for radiopure underground argon arises from the fact that atmospheric argon (AAr) is naturally radioactive due to the presence of the radioisotope \hphantom{{}^{\text{39}}_{\text{}}}{\vphantom{\text{X}}}{}^{\mathchoice{\hbox to0.0pt{\hss$\displaystyle\vphantom{\smash[t]{\text{2}}}\text{39}$}}{\hbox to0.0pt{\hss$\textstyle\vphantom{\smash[t]{\text{2}}}\text{39}$}}{\hbox to0.0pt{\hss$\scriptstyle\vphantom{\smash[t]{\text{2}}}\text{39}$}}{\hbox to0.0pt{\hss$\scriptscriptstyle\vphantom{\smash[t]{\text{2}}}\text{39}$}}}\kern 0.0pt\text{Ar} , having an activity level of 1\text{\,}\mathrm{Bq} BENETTI200783 . Given the low energy threshold of the TPC (< 1\text{\,}\mathrm{k} , where keVee refers to the amount of energy deposited by an electronic recoil) and the scale of its detection volume, this \beta -emitter can yield a too high probability of two or more signals overlapping in time, preventing an unambigous association of S1 and S2 signals or even the deterioration of the PSD capability. On the other hand, argon extracted from underground sources, although it can be activated by cosmic rays during transportation, exhibits radioactivity reduced by more than a factor of one thousand, as demonstrated by the DarkSide-50 experiment Agnes_2016 . The DS-20k TPC is shaped as a regular octagonal prism, with a height and diameter of 350\text{\,}\mathrm{c}\mathrm{m} and formed by eight Polymethyl Methacrylate (PMMA) panels. It is completed with two transparent acrylic windows on the bottom and the top, each coated with a thin conductive layer of Clevios. These coatings act as electrodes to generate a 200\text{\,}\mathrm{V} electrostatic field within the detector. This field allows the drift of the ionization electrons towards the top of the TPC, where a more intense field allows the extraction of the electrons into the thin layer of gaseous argon at the top of the chamber and the generation of UV scintillation light via electroluminescence forming eventually the S2 signal. A metallic grid, located a few millimetres beneath the gas layer separates the drift field from the extraction field region. The walls of the TPC are coated with 98% reflectivity reflector panels and TetraPhenyl Butadiene (TPB) wavelength shifter to convert the UV scintillation light of Ar to 420\text{\,}\mathrm{nm} where the SiPMs have optimum performance. 3 DarkSide-20k Data Acquisition System The Data Acquisition system (DAQ) for the DarkSide-20k experiment, is designed to continuously acquire signals from the 2720 photosensors of the TPC and the vetos. Individual readout channel waveforms are digitized and transferred to the following stage for further processing, without waiting for a trigger decision. In this sense, the DarkSide-20k experiment operates in triggerless mode , where the data stream is uninterrupted and the isolation of interesting signals for physics searches is offloaded to an online computing farm (Sec. 3.2 ). Digitized waveforms are transferred to external nodes called FrontEnd Processors (FEPs, Sec. 3.3 ), where a matched filter and a peak finder are applied to identify the peaks, or hits , within the waveform itself. Hits and associated information are time sorted and moved to dedicated nodes called Time Slice Processors (TSPs, Sec. 3.5 ), where the online reconstruction is performed. Time slices from multiple TSPs are collected into the Merger machine (Sec. 3.5 ), and stored on disk. Additionally, the Merger can conduct online processing of preselected data fragments for a combined physics analysis which can be used as an input to contribute to the Supernova Early Warning System (SNEWS 2.0) Al_Kharusi_2021 . 3.1 Waveform digitization Waveforms from the entire detector will be digitized using 48 commercial VX2745