Thermally-induced microstructural evolution in nanoparticle-based CuO, WO 3 and CuO–WO 3 thin films for hydrogen gas sensing
Kalyani Shaji, Stanislav Haviar, Petr Zeman, Michal Procházka, Radomír Čerstvý, Nirmal Kumar, Jiří Čapek · 2025
Read Thermally-induced microstructural evolution in nanoparticle-based CuO, WO 3 and CuO–WO 3 thin films for hydrogen gas sensing by Kalyani Shaji, Stanislav Haviar, Petr Zeman, Michal Procházka, Radomír Čerstvý, Nirmal Kumar, Jiří Čapek (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-15497.txt.
Introduction
Kalyani Shaji and co-authors track how heat treatment changes thin films used to sense hydrogen gas, in work from 2025. The films are made of nanoparticles of two metal oxides, alone and in alternating layers. They were laid down by a magnetron based gas method and then baked in synthetic air.
Baking ran across a range of a few hundred degrees. Microscopy and several spectroscopy tools charted how the tiny structure evolved. The copper oxide films changed most, with clearer crystals and larger particles as heat rose. The other films stayed more stable. Knowing these shifts helps tune sensors that must survive heat before use.
Catalog record
| CREATOR | Kalyani Shaji, Stanislav Haviar, Petr Zeman, Michal Procházka, Radomír Čerstvý, Nirmal Kumar, Jiří Čapek |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 50 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-15497
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Thermally-induced microstructural evolution in nanoparticle-based CuO, WO 3 and CuO–WO 3 thin films for hydrogen gas sensing Kalyani Shaji, Stanislav Haviar, Petr Zeman, Michal Procházka, Radomír Čerstvý, Nirmal Kumar, Jiří Čapek Abstract This study systematically investigates the microstructural evolution of nanoparticle-based CuO, WO 3 , and composite ’CuO–WO 3 ’ thin films induced by their post-deposition annealing. The films were reactively deposited using a magnetron-based gas aggregation technique, with the composite films consisting of alternating monolayers of CuO and WO 3 nanoparticles. After deposition, the films were annealed in synthetic air at temperatures ranging from 200 to 400 ∘ C and characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Annealing of the CuO films led to the most pronounced changes associated with a gradual enhancement of crystallinity accompanied by significant particle growth with increasing annealing temperature, while the WO 3 and CuO-WO 3 films were more thermally stable to crystallization and particle growth. Notably, at 400 ∘ C, the CuO–WO 3 films crystallized into a novel γ \gamma -CuWO 4 phase. The annealed films were further evaluated for their gas-sensing performance upon H 2 exposure and the obtained results were analyzed in relation to film properties and the microstructural evolution induced by annealing. [type=editor, role=Researcher, orcid=0009-0008-9320-477X] [ role=Researcher, orcid=0000-0001-6926-8927 ] [role=Researcher, orcid=0000-0001-8742-4487 ] [role=Researcher, orcid=0000-0003-3364-7006 ] [role=Researcher, orcid=0000-0001-8507-6642 ] [role=Researcher, orcid=0000-0003-3739-2565 ] [role=Researcher, orcid=0000-0002-3267-7708 ] † † highlights: Reactive synthesis of nanoparticle-based CuO,WO 3 and CuO-WO 3 composite films using a magnetron-based gas aggregation source. Systematic investigation of the films’ microstructural evolution during annealing in synthetic air up to 400 ∘ C. Novel metastable \gamma -CuWO 4 phase identified upon annealing the composite film at 400 ∘ C. Gas-sensing response of the films to H 2 exposure analyzed and discussed in relation to their thermally-induced changes. keywords CuO, WO 3 , CuO–WO 3 ,Microstructural evolution ,Thermal annealing ,Nanoparticle-based thin films ,Gas aggregation source ,Conductometric gas sensors ,Hydrogen gas sensing † † credit: Investigation, Visualization, Writing - Original draft, Writing - Review & Editing † † credit: Investigation, Methodology, Validation, Software, Writing - Original draft † † credit: Conceptualization, Validation, Writing - Original draft, Writing - Review & Editing † † credit: Investigation, Writing - Original draft † † credit: Investigation † † credit: Investigation † † credit: Conceptualization, Methodology, Validation, Writing - Original draft, Writing - Review & Editing, Supervision † † corresponding: Corresponding author 1 Introduction Hydrogen has gained significant interest as a clean and renewable energy carrier, which makes it a promising candidate for various applications, including power generation, large-scale energy storage, and chemical manufacturing [ 1 ] , [ 2 ] . However, its widespread applicability is hindered by safety concerns due to its low flammability limit (4% in air) and extremely low ignition energy (¡0.02 mJ), which present substantial explosion risks [ 3 ] . Furthermore, delicate devices such as fuel cells require precise control of low hydrogen flow rates to ensure optimal performance. As a result, the development of reliable hydrogen sensing technologies is essential for monitoring and regulating hydrogen concentrations across various applications, ensuring both safe and efficient operations. Among gas-sensing technologies, conductometric sensors have attracted considerable interest for their high sensitivity, fast response, and cost-effectiveness [ 4 ] , [ 5 ] . These sensors operate on the principle that the electrical conductivity of the sensing material changes in response to the target gases (analytes), which enables their detection and quantification. In particular, metal oxide semiconductors (MOS) are renowned for their superior performance as conductometric sensors [ 6 , 7 ] . In this case, gas species from the ambient atmosphere adsorb and desorb on the semiconductor surface, which alters the carrier concentration near the surface (known as the depletion layer (DL) for n-type MOS) and, in turn, the electrical properties of the material. Pure MOS sensors (not enhanced by noble-metal catalysts) are typically operated at elevated temperatures (200 – 400 ∘ C) to facilitate the dissociation of H 2 molecules on the surface, which is a critical process for the sensing mechanism. One of the key factors in the gas sensing performance is the microstructure of the sensing material, as it directly influences interactions between the sensing material and the analyte [ 8 ] . From this point of view, nanostructural materials are of particular interest. First, their high surface area significantly increases the number of active sites for gas adsorption and subsequent reactions. Second, optimizing the dimensions and spatial arrangement of the individual building blocks (e.g., nanoparticles (NPs), nanotubes) within the nanostructural materials significantly enhances the ability (known as transducer function) to convert chemical interactions with the analyte gases into a measurable electrical signal [ 9 , 10 ] . Third, so-called ‘necks’ can be formed at the junctions between the individual building blocks of the material, for example, when the material is exposed to an elevated temperature. These ’necks’ significantly affect the changes in the measured conductivity of the percolation network in the material depending on whether the material is exposed to the analyte [ 11 ] . The reason is that smaller ‘necks’ can be ‘closed’ or ‘open’ for the electrical current, depending on the dimensions of the DL formed. Fourth, combining building blocks of different metal oxides may lead to the formation of heterojunctions at their interfaces. These heterojunctions are typically highly sensitive to the analyte and can lead to the formation of even deeper DL. This, in turn, amplifies changes in the electrical conductivity of the percolation network, since even larger ‘necks’ can be ‘closed’ or ‘open’ during the sensing process [ 12 , 13 ] . Among MOS, those composed solely of CuO or WO 3 NPs have shown excellent potential for gas-sensing applications [ 14 , 15 ] . In our recent works [ 16 , 17 , 18 ] , we also demonstrated that the sensing performance can be further enhanced by the synergistic combination of CuO NPs with a WO 3 thin film due to the formation of nano-sized p-n heterojunctions between p-type CuO and n-type WO 3 . Building on these results, we have optimized our deposition technique, which uses a magnetron-based gas-aggregation source (GAS), for the one-step controlled synthesis of the composite thin films consisting of alternating monolayers of CuO and WO 3 NPs [ 19 ] . This physical deposition technique, leveraging low-temperature discharge plasma, allows us to prepare high-purity NPs with tunable size, composition, and morphology, and further explore the effect of a composite of CuO and WO 3 NPs on hydrogen gas sensing. Given that the microstructure of nanoparticle-based (NP-based) thin films is of key importance in determining their gas-sensing performance, we conducted a comprehensive multi-scale structural study (from atomic to morphological scale), which is complemented with hydrogen-sensing measurements. In particular, we systematically investigated the effects of post-deposition thermal annealing in air at temperatures between 200 – 400 ∘ C (mimicking also operation of the MOS sensors at elevated temperatures) on the microstructure evolution of NP-based CuO, WO 3 , and CuO–WO 3 thin films with the aim to further optimize the properties of these films and achieve a deeper understanding of the thermally-induced mechanisms that govern their gas-sensing behavior. 2 Experimental details