A multi-model study of the air pollution related to traffic flow in a two-dimensional porous metropolitan area Journal: Elsevier
N. García-Chan, L.J. Alvarez-Vázquez, A. Martínez, M.E. Vázquez-Méndez · 2025
Read A multi-model study of the air pollution related to traffic flow in a two-dimensional porous metropolitan area Journal: Elsevier by N. García-Chan, L.J. Alvarez-Vázquez, A. Martínez, M.E. Vázquez-Méndez (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-14466.txt.
Introduction
Four researchers model city air pollution from traffic by treating the city itself as a porous sponge, in a 2025 paper. Air and cars both flow through the street grid much as fluid flows through pores, so fluid equations can be borrowed for both. Their study couples the two flows in a flat, two-dimensional city map.
Traffic is handled by a broad flow model that merges a continuity rule with porous-flow equations. For air, a small-scale model estimates each car’s carbon output from its speed and acceleration, and a transport model then spreads that output through the city air. All equations are solved with finite element methods and time-stepping schemes. City leaders could use such a twin model to test traffic plans before enacting them.
Catalog record
| CREATOR | N. García-Chan, L.J. Alvarez-Vázquez, A. Martínez, M.E. Vázquez-Méndez |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 60 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-14466
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A multi-model study of the air pollution related to traffic flow in a two-dimensional porous metropolitan area Journal: Elsevier N. García-Chan, L.J. Alvarez-Vázquez, A. Martínez, M.E. Vázquez-Méndez Abstract In this paper, a useful reinterpretation of the city as a porous medium justifies the application of well-known models on fluid dynamics to develop a multi-model study of urban air pollution due to traffic flow in a large city. Thus, to simulate the traffic flow through the city we use a nonconservative macroscopic traffic model combining the continuity equation with the Darcy-Brinkman-Forchheimer equations. For the air flow, regarding the emission rate of CO 2 \rm{CO_{2}} and its dispersion in the atmosphere, we combine a microscopic model -based on regression techniques but depending on vehicles’ velocity and acceleration- with a classical convection-diffusion-reaction transport model. To solve numerically above PDEs models, the finite element method of Lagrange P 1 \rm{P_{1}} type along with suitable time marching schemes (like the strong stability preserving scheme) were sufficient to obtain stable numerical solutions. Several computational tests were run on a realistic scenario inspired by the Metropolitan Area of Guadalajara (Mexico), showing not only the influence of the urban landscape (that is, the porosity) on traffic flow, air flow, and pollution transport, but also other interesting phenomena such as rarefaction traffic waves. 1 Introduction In large urban areas, traffic flow is the primary source of air pollution; however, studying this phenomenon is challenging due to various factors. The high number of vehicles (thousands or millions) contributes to the complexity of the problem, as do traffic jams resulting from poor urban planning, congestion and accidents. The intricate urban landscape, characterized by a complex network of primary and secondary avenues and streets, the wide range of available fuels (gas, diesel), and the diverse types of vehicles (combustion cars and trucks, hybrid and electric vehicles, heavy-duty vehicles) further complicate the situation. However, despite the apparent chaos, the traffic flow exhibits well-observed patterns, including attraction zones (typically in downtown areas and commercial zones), periods of peak and off-peak hours, and drivers’ preferences for primary roads. The integration of these elements needs the development of sophisticated mathematical models, particularly the characterization of the urban landscape in a metropolis of considerable size. In this context, the authors recently proposed a novel model that interprets the large city as a porous medium, with porosity serving as a metric for the proportion of available space for streets and the complementary space occupied by buildings [ 1 ] . This approach enables the formulation of a nonconservative traffic flow model consisting of a continuity equation based on a source/sink dynamic (traffic demand/off-street parking), a momentum equation of Darcy-Brinkman-Forchheimer type with a relaxation term, and a pressure correction. This model was employed with success to obtain cars density and local speed. A further critical element that must be incorporated into the model is the emissions rate released by traffic flow. The extensive scientific literature on the topic delineates two alternative standpoints [ 2 ] : the macroscopic models and the microscopic ones. The first approach involves the interpolation of mean values of various pollutants measured on specific streets and avenues of the road network, extending these measurements to the entire network while neglecting key microscopic factors such as vehicle velocity and acceleration [ 3 , 4 , 5 ] . However, in a two-dimensional study, this kind of model encompasses the entire city losing spatial resolution. In contrast, microscopic emission rate models consider vehicle velocity and acceleration, using a regression polynomial whose coefficients are adjusted based on the type of combustible and the pollutant of interest. Consequently, it could be profitable to convert microscopic emission rates into macroscopic ones when the distribution of vehicle density, velocity, and acceleration is available at any city location (see [ 2 ] ). The spatial availability for air circulation influences the air flow dynamics, thus, in a wide and large street surrounded by buildings the well-known phenomenon of the wind cannon is produced. This phenomenon is characterized by sharp high wind velocities along the street. In contrast, short and narrow streets generate air stagnation with almost zero velocity. It is important to observe that the space available for air circulation is complement by the space occupied by buildings, this drives us -again- to a porous medium with its fluid and solid parts. This air behavior suggests the use of a porous media model for air flow as well as for the traffic flow (see [ 6 ] for a stationary case). The authors already published a study on the flow of air as an incompressible gas through an urban porous city, so we take this model in our study [ 7 , 8 ] . Concerning the distribution of the pollutant in the atmospheric boundary layer, wind flow and diffusion effects transport the pollutant until reaching remote zones from the release point. Also, depending on the pollutant type, its concentrations could decay by kinetic reactions or by gravitational settling. The pollutant transport is then modeled by a classical advection-diffusion-reaction PDE (see [ 9 ] and the references therein). In this work, a multi-model consisting of models based on fluid dynamics in porous media combined with a microscopic emissions model and a classical dispersion-diffusion-reaction model is used to address the main elements of the urban air pollution phenomenon, resulting in a comprehensive numerical study. The paper is organized as follows. In Section 2, the three mathematical models are formulated, and their most important elements are explained. In Section 3, we briefly explain how to solve the models combining the \rm{P_{1}} Lagrange-type finite element method with suitable marching time schemes, along with the references of previous authors’ papers where the reader can find further details. In Section 4, the results of several numerical experiments are shown, evaluating the influence of the urban landscape on traffic and air flow, which influences the \rm{CO_{2}} emission rate and its dispersion. Finally, in Section 5, we state several claims supported by our numerical experiences regarding air pollution due to traffic flow in large urban areas. 2 The mathematical models In this section, we proceed to formulate the mathematical models involved in our meta-model study, wherein fluid dynamics on porous media plays a pivotal role along with a regression polynomial model to estimate the emissions rate of carbon dioxide. It is pertinent to note that, with the exception of the microscopic emissions rate model, all models have been analyzed by the authors in their recent publisher papers. Consequently, only its most relevant elements are exhibited here, and interested readers are encouraged to consult the references for further details. A remarkable strength of this paper relies in the fact that that the same domain (i.e., the same mesh) may be used for all the models despite their differences in the definition of the corresponding domains. Thus, we denote our domain as \Omega , which contains the rural zone \Omega_{r} and the urban zone \Omega_{u} , surrounding a few inner, natural obstacles that are not included into the domain \Omega_{u} . Domain boundary is denoted by \Gamma , and is divided into the following disjoint line segments: the obstacles’ walls \Gamma_{w} , the inlet airflow \Gamma_{in} , and the outlet airflow