Network-Realized Model Predictive Control Part I: NRF-Enabled Closed-loop Decomposition

Andrei Sperilă, Alessio Iovine, Sorin Olaru, Patrick Panciatici · 2025

Read Network-Realized Model Predictive Control Part I: NRF-Enabled Closed-loop Decomposition by Andrei Sperilă, Alessio Iovine, Sorin Olaru, Patrick Panciatici (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-13042.txt.

Introduction

Andrei Sperilă and co-authors lay the first layer of a split design for predictive control over networks, in a 2025 paper. Model predictive control plans ahead under constraints, but scaling it to big networks is hard. Their architecture puts a distributed feedback layer underneath: it steers the network's information flow along a fixed communication layout.

The authors derive exact formulas for the closed-loop maps this layer creates and give an offline matching procedure to design it. The control laws run in distributed form, one piece per node. The resulting closed-loop models then feed the upper layer, which handles constraints and is detailed in a companion paper. The split aims to keep each layer simple enough to scale.

Catalog record

CREATORAndrei Sperilă, Alessio Iovine, Sorin Olaru, Patrick Panciatici
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE72 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-13042

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Network-Realized Model Predictive Control Part I: NRF-Enabled Closed-loop Decomposition Andrei Sperilă, Alessio Iovine, Sorin Olaru, Patrick Panciatici Abstract A two-layer control architecture is proposed, which promotes scalable implementations for model predictive controllers. The bottom layer is based upon a distributed feedback-feedforward scheme, which directs the controlled network’s information flow according to a pre-specified communication infrastructure. Explicit expressions of the resulting closed-loop maps are obtained and an offline model-matching procedure is proposed for the design of the first layer. The obtained control laws are deployed via distributed state-space-based implementations, and the resulting closed-loop models enable predictive control design for the constraint management procedure described in our companion paper. keywords Distributed control; convex optimization; model predictive control; networked systems; scalable implementations. † † address: Laboratoire des Signaux et Systèmes, CentraleSupélec, Paris-Saclay University, Gif-sur-Yvette, France , , , 1 Introduction 1.1 Context and Motivation In recent years, distributed control has received significant attention in system-theoretic literature. While a number of techniques have emerged in this field (see [ 14 ] for a discussion on the most prominent approaches), the problem of implementing Model Predictive Control (MPC) in a distributed manner (in which separate subcontrollers exchange local information) is still an actively investigated topic. Notably, the procedure formalized in [ 1 ] and [ 2 ] , which is based upon one of the approaches discussed in [ 14 ] , proposes a solution in which MPC-like policies are built using a parametrized distributed control architecture (see [ 13 ] ). With the idea of employing layered control schemes rapidly gaining traction [ 7 ] , the need for a theoretical framework which takes into account the interplay between the different layers of the control algorithm becomes apparent. 1.2 Scope of Work The problem being tackled in this manuscript, and in its companion paper [ 11 ] , is that of employing a class of distributed controllers (see [ 14 ] for a general overview) based upon the celebrated Youla Parametrization to facilitate the design of scalable and computationally efficient MPC-based policies for networks of widely distributed systems. In particular, the control framework which uses the Network Realization Functions (NRF) formalized in [ 10 ] and [ 12 ] will be employed as an interface between a physical network and a number of high-level predictive strategies. The latter act as reference governors for the lower-level implementations and, by leveraging the powerful disturbance-decoupling properties of NRF-based control (see [ 9 ] for a relevant example), the problem of designing these MPC-based strategies can be broken down into local subproblems, whose solutions yield global theoretical guarantees. 1.3 Contributions This paper focuses on the NRF layer of our proposed architecture while also incorporating the features of the MPC design formalism, which privileges discrete-time state-feedback formulations over all other alternatives. Consequently, we present a state-oriented perspective of NRF-based control, which has proven to be effective in the input-output setting investigated in [ 10 ] . The aim is to highlight the advantages of state-feedback in our chosen framework, by showing that the resulting closed-loop maps are highly amenable to model-matching procedures. This allows for the convenient tuning of closed-loop response, in order to prevent the propagation of disturbance throughout the network. We propose a flexible design algorithm based upon the convex optimization procedures used in [ 12 ] and, for the resulting control laws, we formulate a particular state-space-based implementation which can be implemented in a distributed manner. Moreover, these implementations are used in our companion paper [ 11 ] , in order to greatly simplify the design of a model-based predictive control layer. 1.4 Paper Structure The rest of the paper is structured as follows. Section 2 contains a set of preliminary notions, while Section 3 discusses our two-layer architecture and its overarching objectives, with a particular focus on the NRF layer. Section 4 holds the main theoretical results, Section 5 describes the design procedure of our architecture’s NRF layer, and Section 6 presents a set of concluding remarks. 2 Preliminaries 2.1 Notation and Definitions Let \mathbb{N} , \mathbb{R} and \mathbb{C} denote, respectively, the set of natural, real and complex numbers. The set \mathbb{S}:=\{z\in\mathbb{C}\ |\ |z|<1\} stands for the domain of stability , whereas we denote by \partial\mathbb{S}:=\{z\in\mathbb{C}\ |\ |z|=1\} the frontier of stability . Let \mathcal{M}^{p\times m} be the set of all p\times m matrices whose entries are scalar elements that part of a set denoted by \mathcal{M} . Similarly, \mathcal{M}^{p} denotes the set of vectors with dimension m and entries in \mathcal{M} . For any matrix M , \mathrm{row}_{i}(M) is its i^{\text{th}} row, \mathrm{col}_{j}(M) stands for its j^{\text{th}} column and \mathrm{elm}_{ij}(M):=\mathrm{row}_{i}(\mathrm{col}_{j}(M)) . Moreover, the transpose of an arbitrary matrix M is denoted by M^{\top} . For an A\in\mathbb{C}^{p\times m} and an E\in\mathbb{C}^{p\times m} , the matrix polynomial A-zE of indeterminate z\in\mathbb{C} is called a (matrix) pencil . The vector e_{i} stands for the i^{\text{th}} term in the canonical basis of \mathbb{R}^{m} , for some m\in\mathbb{N}\backslash\{0\} . We denote by \mathcal{R}(z) the set of real-rational functions of indeterminate z\in\mathbb{C} . A matrix with entries in \mathcal{R}(z) is termed a Transfer Function Matrix (TFM), and all such TFMs will be denoted using boldface letters. We point out that the system-theoretical concepts employed in this paper are, for the most part, standard to control theory literature (see, for example, [ 6 ] ). For any particular definitions or concepts, we refer the reader to Appendix A . 2.2 System Representations The class of systems considered in this paper are represented in the time domain by the set of equations \displaystyle x[k+1]= \displaystyle\ Ax[k]+B_{u}\,u[k]+B_{d}\,d[k], (1a) \displaystyle y[k]= \displaystyle\ Cx[k]+D_{u}\,u[k]+D_{d}\,d[k], (1b) for any k\in\mathbb{N} with k\geq k_{0}\in\mathbb{N} , where k_{0} represents the initial time instant. For the representations of type ( 1a )-( 1b ), which are commonly referred to as state-space realizations , u is the realization’s controlled input vector , d its uncontrolled input vector or, alternatively, its disturbance vector , y its output vector and x its state vector . For such systems, we proceed to denote by x_{c}\in\mathbb{R}^{n_{x}} the initial condition of the state vector and we also consider A\in\mathbb{R}^{n_{x}\times n_{x}} , B_{u}\in\mathbb{R}^{n_{x}\times n_{u}} , B_{d}\in\mathbb{R}^{n_{x}\times n_{d}} , C\in\mathbb{R}^{n_{y}\times n_{x}} , while D_{u}\in\mathbb{R}^{n_{y}\times n_{u}} and D_{d}\in\mathbb{R}^{n_{y}\times n_{d}} . The positive integer n_{x} appearing in ( 1a )-( 1b ) is called the order of the realization, and we also denote any such realization in compact form via a matrix quadruplet of type \left(A,\begin{bmatrix}B_{u}&B_{d}\end{bmatrix},C,\begin{bmatrix}D_{u}&D_{d}\end{bmatrix}\right) . For every system which is represented via ( 1a )-( 1b ), the pencil A-zI_{n_{x}} is regular and is referred to as the realization’s pole pencil , and the connection between a system which is described by ( 1a )-( 1b ) and its TFM is given by \mathbf{G}(z)=\left[\scriptsize\begin{array}[]{c|cc}A-zI_{n_{x}}&B_{u}&B_{d}\\ \hline\cr C&D_{u}&D_{d}\end{array}\right]:=\\ :=C(zI_{n_{x}}-A)^{-1}\begin{bmatrix}B_{u}&B_{d}\end{bmatrix}+\begin{bmatrix}D_{u}&D_{d}\end{bmatrix}. (2) Finally, given any proper \mathbf{H}\in\mathcal{R}(z)^{n_{y}\times n_{u}} , the notation y[k]=\mathbf{H}(z)\star u[k] denotes the time-response of \mathbf{H}(z) to an input signal vector u[k] , which can be computed as y[k]=\mathbf{H}(z)\star u[k]=D_{H}u[k]+\sum_{i=1}^{\infty}C_{H}A_{H}^{i-1}B_{H}u[k-i],\vskip-2.84526pt (3) for any realization (A_{H},B_{H},C_{H},D_{H}) of \mathbf{H}(z) . Interconnected Dynamical System NRF 1 Area \mathbf{1} MPC 1 x_{1} u_{f1} \{x_{1},w_{1}\} u_{s11} u_{s21} u_{f1} \{x_{j\in\mathcal{N}_{1},j\neq 1},u_{f(j\in\mathcal{N}_{1},j\neq 1)},u_{s1(j\in\mathcal{N}_{1},j\neq 1)}\} \{x_{1},w_{1},u_{s11}\} \{x_{j\in\mathcal{N}_{1},j\neq 1},w_{j\in\mathcal{N}_{1},j\neq 1}\} \cdots NRF i Area \mathbf{i} MPC i x_{i} u_{fi} \{x_{i},w_{i}\} u_{s1i} u_{s2i} u_{fi} \{x_{j\in\mathcal{N}_{i},j\neq i},u_{f(j\in\mathcal{N}_{i},j\neq i)},u_{s1(j\in\mathcal{N}_{i},j\neq i)}\} \{x_{i},w_{i},u_{s1i}\}

Read the complete text