A Numerical Investigation of Particle Deposition on a Substrate
Ananta KumarNayak, AmritpalSingh, Mehrdad Mesgarpour, Mostafa SafdariShadloo · 2025
Read A Numerical Investigation of Particle Deposition on a Substrate by Ananta KumarNayak, AmritpalSingh, Mehrdad Mesgarpour, Mostafa SafdariShadloo (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-12719.txt.
Introduction
Nanoparticles drifting in a fluid settle onto surfaces, and in systems like battery cooling that coating can strangle heat flow. Ananta Nayak and co-authors simulate that settling in this 2025 paper, treating the particles as a concentration field in a two-dimensional channel. They test single square blocks, rows of blocks, and a messy porous structure taken from experiment.
Deposition climbed with faster flow, richer particle load, and stickier surfaces. With several blocks in the channel, the upstream ones collected the most coating, and their buildup eventually choked flow to the rest. The authors offer the stripped-down model as a first map of deposition in complex systems, from cooling loops to filters.
Catalog record
| CREATOR | Ananta KumarNayak, AmritpalSingh, Mehrdad Mesgarpour, Mostafa SafdariShadloo |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-12719
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Numerical Investigation of Particle Deposition on a Substrate Ananta KumarNayak, AmritpalSingh, Mehrdad Mesgarpour, Mostafa SafdariShadloo Abstract The deposition of nanometer-scale particles is of significant interest in various industrial processes. While these particles offer several advantages, their deposition can have detrimental effects, such as reducing the heat transfer efficiency in nanofluid-based battery cooling systems. In this study, we investigated particle deposition around different square substrate configurations as well as experimentally obtained complex porous structure in a two-dimensional setup. The particles modeled as a concentration field using the lattice Boltzmann method, with a given external flow following a parabolic profile. Our results revealed that particle deposition around a substrate increases with higher fluid velocity, greater particle concentration, and higher deposition probability. Additionally, placing multiple number of substrates in the channel resulted in increased deposition on upstream substrates compared to downstream ones. As particle deposition around upstream substrates increases, it eventually obstructs the flow to downstream regions, thereby affecting the overall system performance. The insights gained from this simplified model of particle deposition will play a crucial role in advancing our understanding of deposition processes in complex systems. keywords Lattice Boltzmann method (LBM); Particle deposition; Porous media; Soot particle; Heat transfer. 1 Introduction Nanofluids, which contain nanometer-sized particles suspended in a carrier fluid, are widely used in industrial applications such as battery cooling of electric vehicles due to their higher thermal conductivity and surface area-to-volume ratio [ 1 ] . However, these particles over time tend to form clusters, which can lead to sedimentation on the heat transfer surfaces and reduce heat transfer efficiency due to increased thermal resistance. In addition to cooling systems, other industrial devices such as boilers, furnaces, mufflers, and thermoelectric equipment require treatment of the flue gases released during their use [ 2 ] . These flue gases contain harmful particulate matters (PMs), CO 2 , NO x , and SO 2 , affecting the environment as well as human health [ 4 , 3 ] . With stricter emissions regulations proposed by various countries to mitigate global warming, health risks, and natural disasters, the treatment of flue gases before their release into the atmosphere is now inevitable [ 4 , 5 ] . The capture of PM is of particular concern because these particles can accumulate over time, causing blockages in the filter designed to capture them [ 3 , 5 ] . These blockages not only reduce the efficiency of heat transfer by impeding the flow of gases but also increase pressure drops within the system, resulting operational issues, including higher energy consumption. The filters used for PM capture are generally porous honeycomb structures, which can be constructed by placing posts or obstacles aligned in the direction of the gas flow [ 6 ] . The efficacy of a filter depends on several factors, such as the size and shape of the posts or substrates and their arrangement. For example, smaller pores that allow flue gases to pass through result in better filtration but lead to higher pressure drops [ 7 ] . Therefore, a trade-off between filtration efficiency and pressure drop is necessary. Furthermore, the dynamics of particles play a crucial role in determining how they tend to form clusters and subsequently deposit on the substrate [ 8 ] . Although recent studies have focused primarily on enhancing heat transfer through the use of nanofluids, a comprehensive analysis of their long-term effects on heat transfer remains unclear. It is well known that over time, nanoparticles can accumulate and form sediments on inner surfaces, which can affect the heat transfer efficiency of a system [ 9 , 1 ] . Consequently, further research is required to understand the physics of particle deposition, from the initial stages to the development of larger clusters that can ultimately obstruct fluid flow and hinder heat transfer. This aspect remains largely unexplored in the literature because of the challenges associated with conducting experiments and tracking particle deposition over longer timescales than those involved in cluster formation. To overcome these challenges, numerical methods have been widely adopted over the last three decades [ 6 , 10 ] . Most studies have focused on the impact of fluid dynamics on nanoparticle deposition. For example, Ansari et al. [ 11 ] investigated the roles of various forces, including Brownian motion, lift, drag, and gravity, in the deposition of nanoparticles on substrates in gaseous fluids. Additionally, investigations into particle deposition have mainly aimed at identifying the forces responsible for their deposition and understanding their effects on the heat transfer enhancement of fluids [ 12 , 13 ] . Despite the use of numerical simulations, these studies predominantly focus on short-term effects, such as heat transfer analysis, due to the computational costs associated with simulating millions of particles over extended timescales. Due to the limited access to high computational power for simulating millions of particles, simplified deposition models have been proposed. For instance, Yamamoto et al. [ 14 ] represent particles not as solids flowing within a pipe but rather as a concentration field. This approach enables the qualitative analysis of particle deposition phenomena over large timescales while requiring limited computational power. Furthermore, the deposition of particles using this approach is numerically simulated using the lattice Boltzmann method (LBM). Over the past few decades, the LBM has emerged as a powerful numerical solver and an alternative to conventional methods, such as the finite volume method (FVM), finite difference method (FDM), and finite element method (FEM), particularly for pore-scale transport processes [ 15 , 16 ] . The LBM offers several important advantages, including ease of implementation, high parallelism, and the ability to deal with complex physical phenomena and boundary conditions [ 17 ] . Therefore, LB models have been developed in the past to simulate physio-chemical phenomena, such as dissolution, precipitation, adsorption, and combustion processes [ 16 , 18 , 19 ] . It is important to note that simulating complex reactive transport processes with evolving solid structures typically involves coupling transport processes with models that track dynamically evolving fluid-solid interfaces [ 18 ] . In this regard, the LBM is particularly well-suited for capturing these complexities, providing enhanced capabilities for simulating pore-scale phenomena. Most numerical studies [ 20 , 21 , 22 ] have primarily focused on particle deposition or gas adsorption on substrates with complex topologies. Consequently, the underlying physics, such as the influence of flow fields, substrate geometry and its arrangement on local particle deposition, are still not fully understood. While a few studies [ 16 , 11 , 2 ] have examined particle deposition on simple substrates, such as cylindrical or square geometries, to clarify the mechanisms of local deposition, comprehensive studies remain lacking. These would help to fully explain the factors influencing particle deposition and the impact of evolving fluid-solid layers on flow velocity across different substrate arrangements within a channel. In this study, we employ the LBM to investigate the deposition of solute concentration and the subsequent formation of layers around a simple square substrate in two-dimensional flow. We further explore how the arrangement of multiple square substrates influences the flow field and how this, in turn, affects particle deposition around the solid substrates. Additionally, we investigate particle deposition in