Robust Steady-State-Aware Model Predictive Control for Systems with Limited Computational Resources and External Disturbances
Hassan Jafari Ozoumchelooei, Mehdi Hosseinzadeh · 2025
Read Robust Steady-State-Aware Model Predictive Control for Systems with Limited Computational Resources and External Disturbances by Hassan Jafari Ozoumchelooei, Mehdi Hosseinzadeh (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-12348.txt.
Introduction
Hassan Jafari Ozoumchelooei and Mehdi Hosseinzadeh harden a fore-cast drive law for weak-chip rigs in a 2025 paper on control. The law calls moves by live maths, which taxes small chips in real runs at hand. Short sight spans ease that tax but can shrink the safe pull zone for the rig.
A rest-aware form of the law tracks a set end state with bounds kept at all times. That form adds no fresh tax, yet past takes skip storm hits from the world round it. Their work folds such hits into the law's frame for real use.
Catalog record
| CREATOR | Hassan Jafari Ozoumchelooei, Mehdi Hosseinzadeh |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-12348
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Robust Steady-State-Aware Model Predictive Control for Systems with Limited Computational Resources and External Disturbances Hassan Jafari Ozoumchelooei, Mehdi Hosseinzadeh Abstract Model Predictive Control (MPC) is a powerful control strategy; however, its reliance on online optimization poses significant challenges for implementation on systems with limited computational resources. One possible approach to address this issue is to shorten the prediction horizon and adjust the conventional MPC formulation to enlarge the region of attraction. However, these methods typically introduce additional computational load. Recently, steady-state-aware MPC has been introduced to ensure output tracking and convergence to a given desired steady-state configuration while maintaining constraint satisfaction at all times without adding extra computational load. Despite its promising performance, steady-state-aware MPC does not account for external disturbances, which can significantly limit its applicability to real-world systems. This paper aims to advance the method further by enhancing its robustness against external disturbances. To achieve this, we adopt the tube-based design framework, which decouples nominal trajectory optimization from robust control synthesis, thereby requiring no additional online computational resources. Theoretical guarantees of the proposed methodology are shown analytically, and its effectiveness is assessed through simulations and experimental studies on a Parrot Bebop 2 drone. I Introduction M odel Predictive Control (MPC) is a widely used strategy for controlling systems with constraints on both states and control inputs [ 1 , 2 ] . At each time step, MPC solves an optimization problem over a finite prediction horizon to determine the optimal control input. Despite its effectiveness, MPC relies on online optimization, which can be computationally challenging for systems with limited computational resources [ 3 ] . Approaches to address the issue of limited computational power have been investigated over the last several decades. Methods proposed include pre-computing the optimal solutions for different operating conditions offline and storing them for online use [ 4 ] ; using neural networks to approximate the optimal solution [ 5 , 6 ] ; using triggering mechanisms to determine when the optimization problem needs to be solved [ 7 , 8 ] ; and relying on inexact computations (e.g., with a fixed number of optimization iterations) to obtain a sub-optimal approximation of the solution [ 9 , 10 ] . An alternative approach is to shorten the prediction horizon, thereby reducing the dimension of the optimization problem; this approach has been explored in [ 11 , 12 ] . Although these methods guarantee constraint satisfaction at all times, they do not simultaneously ensure output tracking and convergence to a given steady-state configuration. This issue has been addressed in [ 13 ] . However, [ 13 ] does not account for external disturbances, which limits its applicability and practicality in real-world scenarios. This paper aims to address this issue by further advancing the method presented in [ 13 ] . To achieve this, we employ tube-based MPC methodology [ 14 , 15 , 16 , 17 ] , which uses set-theoretic techniques to ensure that all possible trajectories of a system impacted by external disturbances stay within a series of acceptable regions known as reachability tubes. Our motivation for building upon tube-based techniques is their ability to decouple nominal trajectory optimization from robust control synthesis, thereby reducing computational demands for handling disturbances. The key contributions of this paper are: i) the development of a novel robust MPC that can handle external disturbances, ensure constraint satisfaction, and address control objectives for any given prediction horizon length; ii) the provision of theoretical guarantees for its recursive feasibility and closed-loop stability; and iii) the analysis and validation of the proposed scheme through extensive simulation and experimental studies. The rest of this paper is organized as follows. Section II presents the preliminary materials and states the problem. The proposed control scheme is developed in Section III , and its theoretical properties are investigated in Section IV . Sections V and VI present simulation and experimental results, respectively. Finally, Section VII concludes the paper. Notations: We use \mathbb{R} to denote the set of real numbers, \mathbb{R}_{>0} to denote the set of positive real numbers, and \mathbb{R}_{\geq 0} to denote the set of non-negative real numbers. Similarly, we use \mathbb{Z} , \mathbb{Z}_{>0} , and \mathbb{Z}_{\geq 0} to denote the sets of integers, positive integers, and non-negative integers, respectively. We use x\in\mathbb{R}^{n} to indicate that x belongs to the n -dimensional real space. Given x\in\mathbb{R}^{n} , we denote its transpose by x^{\top} . Also, \left\|x\right\|_{Q}^{2}=x^{\top}Qx , where Q\in\mathbb{R}^{n\times n} . We use \ast in the superscript to indicate an optimal decision. We use \text{diag}\{a_{1},a_{2},\dots,a_{n}\} to denote an n\times n matrix with diagonal entries a_{1},a_{2},\dots,a_{n}\in\mathbb{R} . For given sets X,Y\subset\mathbb{R}^{n} , X\ominus Y:=\{x\mid x-y\in X,\forall y\in Y\} is the Pontryagin set difference, and X\oplus Y:=\{x+y\mid x\in X,y\in Y\} is the Minkowski set sum. We use I_{n} to denote the n\times n identity matrix, and \mathbf{0} to denote a zero matrix of appropriate dimensions. II Preliminaries and Problem Statement Problem Setting: Consider that the system to be controlled can be represented by the following disturbed discrete-time linear time-invariant model: \displaystyle x(t+1) \displaystyle=Ax(t)+Bu(t)+w(t), (1a) \displaystyle y(t) \displaystyle=Cx(t)+Du(t), (1b) where x(t)\in\mathbb{R}^{n} is the state vector, u(t)\in\mathbb{R}^{p} is the control input, y(t)\in\mathbb{R}^{m} is the output vector, and w(t)\in\mathcal{W}\subset\mathbb{R}^{n} is an unknown bounded disturbance vector. Assumption II.1 The pair (A,B) is stabilizable. At any time instant t , the state and input must satisfy the following constraints: x(t)\in\mathcal{X},~~u(t)\in\mathcal{U}, (2) where \mathcal{X}\subseteq\mathbb{R}^{n} and \mathcal{U}\subseteq\mathbb{R}^{p} are convex and compact sets containing the origin. The disturbance-free (a.k.a. nominal) dynamics of system ( 1 ) can be expressed as follows: \displaystyle\bar{x}(t+1) \displaystyle=A\bar{x}(t)+B\bar{u}(t), (3a) \displaystyle\bar{y}(t) \displaystyle=C\bar{x}(t)+D\bar{u}(t), (3b) where \bar{x} , \bar{u} and \bar{y} are nominal state, input and output respectively. For any given reference r\in\mathbb{R}^{m} , suppose that there exists at least one steady-state pair \big(\bar{x}_{s},\bar{u}_{s}\big) such that \bar{x}_{s}=A\bar{x}_{s}+B\bar{u}_{s},~~r=C\bar{x}_{s}+D\bar{u}_{s}, (4) where \bar{x}_{s}\in\mathcal{X} and \bar{u}_{s}\in\mathcal{U} . A reference that meets this criterion is called a steady-state admissible reference; we denote the set of all such references by \mathcal{R}\subseteq\mathbb{R}^{m} . Thus, for any r\in\mathcal{R} , the set of all admissible steady-state configurations is: \displaystyle\mathcal{Z}_{r}=\big\{(\bar{x}_{s},\bar{u}_{s})\in\mathcal{X}\times\mathcal{U}| \displaystyle\bar{x}_{s}=A\bar{x}_{s}+B\bar{u}_{s}, \displaystyle r=C\bar{x}_{s}+D\bar{u}_{s}\big\}. (5) According to Assumption II.1 , elements of \mathcal{Z}_{r} can be parameterized as [ 18 , 13 , 19 , 20 ] : \displaystyle\bar{x}_{s}=M_{1}\theta,~\bar{u}_{s}=M_{2}\theta,~r=L\theta, (6) Where M_{1}\in\mathbb{R}^{n\times n_{\theta}} , M_{2}\in\mathbb{R}^{p\times n_{\theta}} , L\in\mathbb{R}^{m\times n_{\theta}} , and \theta\in\mathbb{R}^{n_{\theta}} is the parameterizing vector, with n_{\theta} denoting the dimensionality of \theta . See [ 13 ] for guidelines on determining the matrices M_{1} , M_{2} , and L . Tube of Trajectories: Suppose that the control input \bar{u}(t) is calculated at time instant t for the nominal system given in ( 3 ). Considering that the actual system may be disturbed by the external disturbance w(t) , the trajectory of the disturbed system is likely to deviate from the nominal prediction. To mitigate the impact of these disturbances and keep the trajectory as close to the nominal path as possible, we can determine the control input applied to the system, denoted by u(t) , as follows [ 21 , 15 ] : u(t)=\bar{u}(t)+K\big(x(t)-\bar{x}(t)\big), (7) where K\in\mathbb{R}^{p\times n} is such that A+BK is Schur. In this case, according to ( 1 ) and ( 3 ), the dynamics of the error signal e(t)\triangleq x(t)-\bar{x}(t) are: e(t+1)=(A+BK)e(t)+w(t). (8) Since A+BK is Schur and