Stochastic Schrödinger equation for homodyne measurements of strongly correlated systems Journal: J. Phys. B: At. Mol. Opt. Phys.

Aniket Patra, Felix Motzoi, Klaus Mølmer · 2025

Read Stochastic Schrödinger equation for homodyne measurements of strongly correlated systems Journal: J. Phys. B: At. Mol. Opt. Phys. by Aniket Patra, Felix Motzoi, Klaus Mølmer (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-12305.txt.

Introduction

Aniket Patra, Felix Motzoi, and Klaus Molmer derive in 2025 the right math lens for watching a strongly interacting quantum system without stopping it. A light-based readout, homodyne detection, yields a jittery record as the system evolves. Starting from a real atom setup, they build an equation that follows one run's noisy path rather than an average.

A standard shortcut trims the atom-light link to a form written only with atom terms. In the right limit it lands on the textbook equation for smooth quantum watching, they show, so real mess can mirror ideal theory. As a test they watch a grid of atoms that shove each other, where the time record exposes jumps the average hides. Such lenses help labs read live quantum matter.

Catalog record

CREATORAniket Patra, Felix Motzoi, Klaus Mølmer
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE78 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-12305

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Stochastic Schrödinger equation for homodyne measurements of strongly correlated systems Journal: J. Phys. B: At. Mol. Opt. Phys. Aniket Patra, Felix Motzoi, Klaus Mølmer Abstract We derive a stochastic Schrödinger equation that describes the homodyne measurement record of a strongly interacting atomic system. We derive this equation for a general system, where we use the rotating wave approximation in the linear atom-light interaction part, and the resulting equation is expressed in terms of the atomic operators only. Weak measurements are theoretically described in terms of positive operator-valued measures. Among different weak measurement schemes, several earlier references studied the Gaussian quantum continuous measurement in detail. Here we consider a homodyne measurement setup. We then demonstrate that the derived equation for this setup in the appropriate limit is the same as the one obtained while performing a Gaussian quantum continuous measurement. Keywords : ultracold dynamics, optical and laser physics, homodyne measurement. 1 Introduction When a physical property of a quantum state |\Psi\rangle is measured, one describes the result traditionally in terms of a projective measurement that causes the state to collapse. We associate an observable \hat{\Lambda} , which is generally represented as a Hermitian matrix, to the measured physical property, e.g., momentum. It is then possible to write \hat{\Lambda}=\sum_{\lambda}\lambda\hat{\Pi}_{\lambda} , where \{\lambda\} are the real eigenvalues of \hat{\Lambda} and \hat{\Pi}_{\lambda}=|\lambda\rangle\langle\lambda| are rank-1 projectors. If the projective measurement produces a result \lambda , the quantum state must have been projected by \hat{\Pi}_{\lambda} into the eigenstate |\lambda\rangle . For instance, the time of flight measurement that one performs to probe different phases of interacting atomic Hamiltonians in optical lattices are analyzed within this projective measurement paradigm [ 1 , 2 ] . We instead focus on a more realistic description of an experimental setup, where the system of interest is not directly measured. Rather, the system interacts with a second quantum system (called the meter or the apparatus ), and the meter is later measured projectively. Unlike in a projective measurement, after such generalized measurement, one obtains a state that is peaked about an eigenstate |\lambda\rangle with a certain width. A large width means more uncertainty in obtaining the corresponding eigenvalue \lambda . A generalized measurement, where one manages to extract only infinitesimal information about the system, is referred to as a weak measurement . Recently, this concept of weak measurement has been invoked in several optics experiments. For instance, an experiment depicting the spin Hall effect of light treats the phenomenon as a weak measurement of the spin projection of the photons [ 3 ] . Weak measurement schemes were also employed to detect the Goos-Hänchen and Imbert-Fedorov shifts in partial reflection [ 4 , 5 , 6 ] . One need not explicitly include the meter in the description of a weak measurement. It is possible to describe the measurement scheme by the action of a set of generalized measurement operators \{\hat{M}_{r}\} on the system, where \{r\} denotes the corresponding measurement outcomes [ 7 , 8 , 9 , 10 , 11 ] . Note that, by \{r\} , we denote the real eigenvalues of an ancillary observable. After the measurement process, if one obtains a result r , the state of the system is given by \hat{M}_{r}|\Psi\rangle/\mathcal{P}_{r}, where \mathcal{P}_{r} is the probability of getting the particular result r . This probability \mathcal{P}_{r} is defined in terms of the probability operators or effects \hat{E}_{r}=\hat{M}_{r}^{\dagger}\hat{M}_{r} as \mathcal{P}_{r}=\langle\Psi|\hat{E}_{r}|\Psi\rangle. Since \sum_{r}\mathcal{P}_{r}=1 , one must have \sum_{r}\hat{E}_{r}=\mathbb{1} . Compare this with the resolution of identity \sum_{\lambda}\hat{\Pi}_{\lambda}=\mathbb{1} for projective measurements. The set of all these effects \{\hat{E}_{r}:r\} is referred to as a positive operator-valued measure (POVM). The generalized measurement operator given by \hat{M}(\alpha)=\left(\frac{4\mathcal{K}\mathrm{d}t}{\pi}\right)^{1/4}\int_{-\infty}^{+\infty}e^{-2\mathcal{K}\mathrm{d}t\left(x-\alpha\right)^{2}}\left|x\right\rangle\left\langle x\right|\mathrm{d}x (1) corresponds to the Gaussian quantum continuous measurement of the Hermitian operator \hat{X} at a sequence of intervals of length \mathrm{d}t and with measurement strength \mathcal{K} [ 7 , 8 ] . The Hermitian operator \hat{X} has a continuous spectrum of eigenvalues x and orthonormal eigenstates |x\rangle with the property \langle x|x^{\prime}\rangle=\delta\left(x-x^{\prime}\right) . The continuous indices \alpha are the eigenvalues of an ancillary observable and are the possible measurement outcomes. They are not, however, the eigenvalues of either \hat{M}(\alpha) or \hat{X} . At this point, however, it is not immediately clear how the generalized measurement operators are connected to the real experimental setups, e.g., the setup considered in Ref. [ 12 ] . Figure 1: Studying strongly correlated systems inside an optical cavity. In the panel (a) of the schematic diagram above, we show the strongly correlated Hamiltonian \hat{H}_{\text{atm}} realized by trapping ultracold atoms in an optical lattice. The ground state of this Hamiltonian |\Psi_{-}\rangle has interesting properties that one would like to explore. In panel (b) , we depict the strongly correlated atomic system inside a single mode optical cavity. The annihilation (creation) operator for this mode is \hat{a}(\hat{a}^{\dagger}) . Although the cavity mode photons couple the ground state |\Psi_{-}\rangle to the excited state |\Psi_{+}\rangle , it is possible to adiabatically eliminate the excited state and obtain an effective dispersive atom-light Hamiltonian ( 9 ). In panel (c) , we show the external driving laser – input field (\hat{a}_{\mathrm{in}},\hat{a}_{\mathrm{in}}^{\dagger}) – in red [ 13 ] . This then gives rise to the output field (\hat{a}_{\mathrm{out}},\hat{a}_{\mathrm{out}}^{\dagger}) . The input field populates the cavity, and the output field – which is entangled with the strongly correlated system inside the cavity – is finally detected. The output photons are detected with a homodyne setup, see Fig. 2 . In fact, this set up detects the linear combinations of the local oscillator and output mode. We show that in an appropriate limit the measurement record is appropriately described by an SSE ( 62 ) in terms of only the atomic degrees of freedom, which is equivalent to the SSE that is obtained when one performs a Gaussian continuous quantum measurement of an atomic observable \hat{\mathcal{M}}_{0} on \hat{\mathcal{H}}_{\text{atm}} . In this paper, we introduce a scheme to study the properties of a correlated many-body system in Fig. 1 . As shown in Fig. 1 (b), the system of interest – for example, strongly interacting ultracold atoms in an optical trap described by the Hamiltonian \hat{\mathcal{H}}_{\text{atm}} – interacts further with the cavity mode photons. The cavity is driven by an external laser. The small time segments of length \mathrm{d}t of the input light are treated as single modes, which are also considered to be in the coherent state \left|\alpha\right\rangle right before the driving laser enters the cavity [ 14 ] , see Fig. 1 (c). After interaction, however, the output field is entangled with the interacting atomic system and it no longer factorizes. Thus, we vicariously analyse the properties of \hat{\mathcal{H}}_{\text{atm}} by detecting the output field (\hat{a}_{\mathrm{out}},\hat{a}_{\mathrm{out}}^{\dagger}) using a homodyne setup. In this setup (see Fig. 2 ), after mixing the output light further with another beam of coherent light of high intensity (a local oscillator ), we perform projective measurements on the light. Since this measurement procedure does not destroy the quantum entanglement of the system of interest, one can keep probing the atomic system \hat{\mathcal{H}}_{\text{atm}} for a prolonged period of time. Figure 2: In this experimental setup, the gray shaded box represents the cavity, where the strongly interacting Hamiltonian is engineered using cold atoms in optical

Read the complete text