Analysis of adiabatic shear coupled to ductile fracture and melting in viscoplastic metals

J.D. Clayton · 2025

Read Analysis of adiabatic shear coupled to ductile fracture and melting in viscoplastic metals by J.D. Clayton (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-10625.txt.

Introduction

John Clayton analyzes how metals fail in narrow shear bands when fracture and melting join the picture, in a 2025 paper. Under fast shear, heat cannot escape, so the band softens and strain piles up. Three softening routes can act at once: heat, ductile tearing, and melting. The paper builds one frame that couples all three in a lawful way.

A test case on high-strength steel matched lab torsion data well. Melting turned out to be blocked by fracture under real test settings. Pulling pressure sped damage and made flaws matter more. A threshold energy for band onset rose with the strain needed and fell as starter flaws grew worse.

Catalog record

CREATORJ.D. Clayton
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE117 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-10625

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Analysis of adiabatic shear coupled to ductile fracture and melting in viscoplastic metals J.D. Clayton Abstract Material failure by adiabatic shear is analyzed in viscoplastic metals that can demonstrate up to three distinct softening mechanisms: thermal softening, ductile fracture, and melting. An analytical framework is constructed for studying simple shear deformation with superposed static pressure. A continuum power-law viscoplastic formulation is coupled to a ductile damage model and a solid-liquid phase transition model in a thermodynamically consistent manner. Criteria for localization to a band of infinite shear strain are discussed. An analytical-numerical method for determining the critical average shear strain for localization and commensurate stress decay is devised. Averaged results for a high-strength steel agree reasonably well with experimental dynamic torsion data. Calculations probe possible effects of ductile fracture and melting on shear banding, and vice-versa, including influences of cohesive energy, equilibrium melting temperature, and initial defects. A threshold energy density for localization onset is positively correlated to critical strain and inversely correlated to initial defect severity. Tensile pressure accelerates damage softening and increases defect sensitivity, promoting shear failure. In the present steel, melting is precluded by ductile fracture for loading conditions and material properties within realistic protocols. If heat conduction, fracture, and damage softening are artificially suppressed, melting is confined to a narrow region in the core of the band. Key words : adiabatic shear; localization; plasticity; fracture; melting; phase-field; iron; steel 1 Introduction Shear localization is a prevalent failure mode in solid materials that undergo strain-softening mechanisms. In crystalline metals deformed at high rates, near-adiabatic conditions are obtained, promoting a build up of local internal energy and temperature from plastic work, in turn leading to thermal softening as dislocation mobility increases with temperature. A mechanical instability ensues, beyond which localization into a thin band of very high shear strain and strain rate occurs [ 1 , 2 ] . Shear banding is often accompanied by damage mechanisms such as cracking and void growth [ 3 , 4 , 5 , 6 , 7 ] , and melting is theoretically possible if temperatures become large enough [ 8 ] . In this work, “damage” and “ductile fracture” are used to refer changes in local material structure—distinct from phase transformation and deformation twinning and not captured by thermal softening alone in the context of continuum plasticity theory—that induce degradation of local strength. Experiments and models on adiabatic shear spanning the previous four decades are reviewed in the monograph [ 1 ] and more recent article [ 2 ] . Most previous continuum modeling of adiabatic shear localization in metals, be it analytical [ 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 ] or numerical [ 18 , 19 , 20 , 21 , 22 , 23 , 24 ] , did not explicitly address fracture or melting mechanisms. However, several continuum damage mechanics-type models for adiabatic shear [ 25 , 26 , 27 , 28 ] represented degradation distinctly from purely thermal softening. More recently, phase-field models [ 29 , 30 , 31 , 32 , 33 , 34 , 35 ] , extending ideas for depicting brittle fracture and structural transformations in elastic solids [ 36 , 37 , 38 , 39 , 40 , 41 ] , have addressed ductile fracture and adiabatic shear localization in elastic-plastic solids. A common element of many models is a contribution of some fraction of energy from plastic work to the net driving force for fracture [ 29 , 30 , 31 , 42 , 33 , 34 , 35 ] , supported by experiments that show importance of microstructure- and damage-softening relative to thermal softening [ 43 , 44 ] . Furthermore, many continuum damage and ductile-fracture phase-field models include a threshold inelastic energy density at which damage nucleates [ 45 , 27 , 28 , 33 , 34 ] , as opposed to classical phase-field fracture mechanics wherein any elastic energy can initiate (diffuse) cracking [ 41 , 46 ] . Timing of cracking or void nucleation relative to localized flow varies among metals with different compositions and microstructures [ 47 , 4 , 5 , 6 , 48 , 7 ] . Those cited experiments usually suggest that damage mechanisms accompany or follow localization, rather than precede it, since cracks and voids are scarcely seen outside shear bands in those materials tested. Direct evidence of melting has been reported within dynamic shear bands in various titanium and steel alloys [ 47 , 49 , 50 , 51 ] . Known prior analyses of adiabatic shear did not include the thermodynamics of melting, even though local temperatures far exceeding the melting point of iron or steel can be predicted inside the shear band [ 8 , 11 , 14 , 52 ] . Phase-field models combining mechanics of elasticity and thermodynamics and kinetics of melting and solidification exist [ 53 , 54 , 55 , 56 ] , but these do not consider plastic deformation or adiabatic shear. A continuum model described flowing material within a shear band using a Bingham model with Newtonian viscosity [ 57 ] , at temperatures below the ambient melt temperature. Therein, the calibrated viscosity was so low for three different metallic systems that the constant, rate-independent part of the shear stress dominated. A recent theoretical study [ 8 ] advanced the analyses of Molinari and Clifton [ 11 , 12 , 14 ] to account for influences of superposed pressure, external magnetic fields, and solid-solid phase transformations on adiabatic shear localization. Results showed how loading conditions and solid-solid phase transformations can promote or inhibit strain localization in iron and a high-strength Ni-Cr steel. Herein, treatments of Refs. [ 8 , 11 , 12 , 14 ] are further extended to account for damage (i.e., ductile shear fracture) and melting (i.e., solid-liquid transformation) processes. Criteria for localization into a band of infinite shear [ 11 ] are analyzed, and methods for calculating the average shear strain at which localization ensues are developed. The latter require numerical iteration and numerical integration, as closed-form expressions for critical strain cannot be derived analytically. The ductile fracture component of the model further addresses the additional “average” shear strain accommodated by the sample after localization, accounting for the effective shear displacement jump across the band whose shear strain approaches infinity and width approaches zero. This allows for representation of a gradual softening behavior in the macroscopic shear stress versus shear strain response as regularly witnessed experimentally [ 45 , 28 , 5 , 6 , 58 ] . Overly abrupt drops to zero stress upon localization [ 11 , 12 , 8 ] were criticized by Molinari and Clifton [ 12 ] as a notable deficiency of their original approach, therein speculated a result of poor resolution of defects. As assumed or justified in prior works [ 12 , 59 , 1 , 8 ] for materials (e.g., steels) and average strain rates (e.g., 10^{3}-10^{4} /s) of present interest, regularization mechanisms of heat conduction and inertia are omitted to enable a tractable analysis without recourse to advanced numerical methods such as finite elements or finite differences. Similarly, to allow localization into

Read the complete text