A Discontinuous Galerkin Method for Simulating 3D Seismic Wave Propagation in Nonlinear Rock Models: Verification and Application to the 2015 M w 7.8 Gorkha Earthquake

2025

Read A Discontinuous Galerkin Method for Simulating 3D Seismic Wave Propagation in Nonlinear Rock Models: Verification and Application to the 2015 M w 7.8 Gorkha Earthquake (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-09714.txt.

Introduction

Zihua Niu and five co-authors simulate 3D seismic wave propagation in nonlinear rock models with a discontinuous Galerkin method. The catalog entry lacked author data, while the head carries the full byline used here. Rocks and soils respond nonlinearly to seismic waves, which shapes ground motion from source to site. Monitoring has revealed wave speed drops stretching tens of kilometers after quakes.

A nonlinear damage model constrained by lab experiments drives the simulations of the 2015 magnitude 7.8 Gorkha earthquake. Co seismic wave speed reduction varies from under 0.01 percent to over 50 percent, strongest near the source and inside the Kathmandu Basin. Comparing elastic, viscoelastic, plastic, and damage models shows the damage model best captures low frequency amplification from strain dependent speed loss.

Catalog record

YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE92 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-09714

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Discontinuous Galerkin Method for Simulating 3D Seismic Wave Propagation in Nonlinear Rock Models: Verification and Application to the 2015 M w 7.8 Gorkha Earthquake Abstract The nonlinear mechanical responses of rocks and soils to seismic waves play an important role in earthquake physics, influencing ground motion from source to site. Continuous geophysical monitoring, such as ambient noise interferometry, has revealed co-seismic wave speed reductions extending tens of kilometers from earthquake sources. However, the mechanisms governing these changes remain challenging to model, especially at regional scales. Using a nonlinear damage model constrained by laboratory experiments, we develop and apply an open-source 3D discontinuous Galerkin method to simulate regional co-seismic wave speed changes during the 2015 M w 7.8 Gorkha earthquake. We find pronounced spatial variations of co-seismic wave speed reduction, ranging from < < 0.01% to > > 50%, particularly close to the source and within the Kathmandu Basin. The most significant reduction occurs within the sedimentary basin and varies with basin depths, while wave speed reductions correlate with the fault slip distribution near the source. By comparing ground motions from simulations with elastic, viscoelastic, elastoplastic, and nonlinear damage rheologies, we demonstrate that the nonlinear damage model effectively captures low-frequency ground motion amplification due to strain-dependent wave speed reductions in soft sediments. We verify the accuracy of our approach through comparisons with analytical solutions and assess its scalability on high-performance computing systems. The model shows near-linear strong and weak scaling up to 2048 nodes, enabling efficient large-scale simulations. Our findings provide a physics-based framework to quantify nonlinear earthquake effects and emphasize the importance of damage-induced wave speed variations for seismic hazard assessment and ground motion predictions. † † journal: JGR: Solid Earth † † authors: Zihua Niu, Alice-Agnes Gabriel, Sebastian Wolf, Thomas Ulrich, Vladimir Lyakhovsky, Heiner Igel Department of Earth and Environmental Sciences, Ludwig-Maximilians-Universität München, Munich, Germany Scripps Institution of Oceanography, UC San Diego, La Jolla, CA, USA Technical University of Munich, Munich, Germany Geological Survey of Israel, Jerusalem 9692100, Israel keypoints We propose and verify a 3D discontinuous Galerkin method for nonlinear seismic wave propagation on high-performance computing systems. The 2015 M w 7.8 Gorkha earthquake simulations show co-seismic wave speed reductions from < 0.01% to > 50%, varying with fault slip and geology. The nonlinear model captures low-frequency ground motion amplification in soft sediments, highlighting key effects for seismic hazard analysis. Plain Language Summary Earthquakes cause significant changes in the mechanical properties of rocks and soils, including reductions in seismic wave speeds. These changes, recorded over the past two decades using advanced monitoring techniques, such as ambient noise analysis, reveal valuable information about underground conditions. However, existing models cannot fully capture the complex nonlinear behavior of rocks and soils during an earthquake from source to site. To address this, we extend SeisSol, an open-source software for simulating seismic waves, to model 3D nonlinear wave propagation. We demonstrate the efficient execution of the code on powerful computers. This enhancement allows us to study co-seismic wave speed changes while accounting for complex fault geometry and surface topography. We apply this tool to the 2015 M w Gorkha, Nepal, earthquake and find significant variations in wave speed reductions, ranging from less than 0.01% to over 50%, with the largest reductions concentrated in sedimentary basins. Comparisons with other models demonstrate that the nonlinear damage model employed in this study effectively captures the amplification of low-frequency ground motions by soft sediments, a key factor in understanding earthquake impacts. These insights improve our ability to assess seismic hazards and guide the design of infrastructure better equipped to withstand earthquakes. 1 Introduction Large earthquakes generate strong ground motions that pose a significant threat to civil structures and human life ( Ben-Zion et al. 2022 ) . Physics-based models of rocks and soils are essential for simulating potential ground motions from earthquakes in numerical simulations that can account for the spatial heterogeneity and complex surface topography of the Earth’s lithosphere ( Cui et al. 2010 ; Taufiqurrahman et al. 2022 ; Roten et al. 2023 ) . Linear models have successfully explained key phenomena in seismic wave propagation, such as wave field amplification in soft sediments ( Moczo and Bard 1993 ; van Ginkel et al. 2022 ) , directivity effects of large earthquakes ( Boatwright and Boore 1982 ; Roten et al. 2014 ; Wollherr et al. 2019 ) , and resonance in near-surface structures, including surface topography ( Lee et al. 2009 ; Hartzell et al. 2014 ) and sedimentary basins ( Castellaro and Musinu 2023 ) . In recent decades, nonlinear mechanical responses of rocks to seismic waves have been widely observed, covering distances from a few kilometers to over one hundred kilometers from the source ( Sens-Schönfelder and Wegler 2006 ; Gassenmeier et al. 2016 ; Lu and Ben-Zion 2022 ) . Temporal variations in seismic wave speeds during and after earthquakes have been observed using techniques such as repeating earthquakes ( Poupinet et al. 1984 ; Bokelmann and Harjes 2000 ; Schaff and Beroza 2004 ) , cross-correlation of the ambient noise or aftershock recordings between seismic station pairs ( Sens-Schönfelder and Wegler 2006 ; Brenguier et al. 2008 ; Qiu et al. 2020 ) , and auto-correlation of data at individual stations ( Bonilla et al. 2019 ; Qin et al. 2020 ; Li and Ben-Zion 2023 ) . In these observations, rocks typically exhibit a rapid co-seismic reduction in seismic wave speeds, followed by long-term recovery ( Gassenmeier et al. 2016 ) . Measured magnitudes of such co-seismic wave speed reduction range from less than 1% up to over 10%, depending on factors such as rock type, distance from the source, depth of interests, and the temporal resolution of the monitoring technique ( Brenguier et al. 2014 ; Wang et al. 2021 ) . Notably, auto-correlation analyses at single stations reveal that co-seismic reductions in wave speed up to 8% are possible at depths between 1 km and 3 km within 20 minutes after an earthquake ( Bonilla and Ben-Zion 2021 ) . Co-seismic wave speed changes under dynamic perturbation are sensitive to rheology, ambient stress, and thermal and hydraulic conditions ( Manogharan et al. 2022 ; Lu and Ben-Zion 2022 ) . Such changes are potentially new observables that can be extracted from seismic waves to probe subsurface structure and rheology. However, observations of co-seismic wave speed changes may not be adequately captured by linear elastic or visco-elastic models ( Johnson and Sutin 2005 ; Rivière et al. 2015 ; Manogharan et al. 2022 ) , indicating the need for more advanced physics-based frameworks. The nonlinear mechanical responses become most prominent when seismic waves propagate through soft sediments, typically located a few hundred meters below the ground surface ( Wang et al. 2021 ) . Soft sediments typically exhibit low seismic wave speeds, amplifying the strain field to values exceeding 10 -3 and reducing the shear modulus by more than 50% ( Roten et al. 2012 ; van Ginkel et al. 2022 ) . This behavior is accompanied by the damping of ground motion amplitudes ( Rajaure et al. 2017 ) and a change in the frequency components of seismograms toward lower values ( Bonilla et al. 2011

Read the complete text