Evidence of the matrix effect on a compositionally graded oxide thin film
J. Scola, F. Jomard, E. Loire, J. Wolfman, B. Negulescu, G. Z. Liu, M.-A. Pinault-Thaury · 2025
Read Evidence of the matrix effect on a compositionally graded oxide thin film by J. Scola, F. Jomard, E. Loire, J. Wolfman, B. Negulescu, G. Z. Liu, M.-A. Pinault-Thaury (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-09382.txt.
Introduction
Scola and six co-authors show how the mix of atoms around an element can skew a standard tool for measuring thin films. Their paper appeared in two thousand twenty-five. The film studied stacks two oxide layers on a crystal base. The top layer blends barium and strontium in a share that slides smoothly from one end to the other.
They mapped that blend with X-ray methods before blasting the film with an ion beam. The beam tool counts atoms by weight, layer by layer. Titanium stays fixed in the blend, yet its signal rose as strontium took barium's place. Neighbors, it seems, change how likely an atom is to fly off charged. The team also showed the tool reads depth sharply, with blur of just a few atoms' width. Such skews matter whenever films are graded on purpose.
Catalog record
| CREATOR | J. Scola, F. Jomard, E. Loire, J. Wolfman, B. Negulescu, G. Z. Liu, M.-A. Pinault-Thaury |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-09382
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Evidence of the matrix effect on a compositionally graded oxide thin film J. Scola, F. Jomard, E. Loire, J. Wolfman, B. Negulescu, G. Z. Liu, M.-A. Pinault-Thaury Abstract A heterostructure of Ba 1-x Sr x TiO 3 /La 1.1 Sr 0.9 NiO 3 /SrTiO 3 has been analysed by magnetic sector secondary ion mass spectrometry (SIMS). The stoichiometry parameter x x of the top layer was made varying continuously from 0 to 1 along the width of the sample by combinatorial pulsed laser deposition. Prior to SIMS analysis, the composition gradient of Ba 1-x Sr x TiO 3 was quantitatively characterized by chemical characterizations including wavelength and energy dispersive X-ray spectroscopies. Even if the Ti content is constant into Ba 1-x Sr x TiO 3 , its ionic yield exhibits an increasing trend as Ba is substituted by Sr. Such a phenomenon can be explained by the variation of the neighbouring atoms chemistry which affects the ionization probability of titanium during the sputtering process. In addition to the continuously varying composition, the oxide multilayer sample features sharp interfaces hence the in-depth resolution under our analysing conditions has been investigated too. The modelling of the interface crossing profiles reveals that the instrumental contribution to the profile broadening is as low as 5 nm. I Introduction Due to their high dielectric permittivity, low dielectric losses and dielectric tunability Qiu et al. 2016 , dielectric materials are promising for applications in microwave and multifunctional devices Bao et al. 2008 ; Jin et al. 2009 . Ba 1-x Sr x TiO 3 is one of the most famous dielectrics since the Sr fraction can be varied, thus tailoring its dielectric properties. So far, attention has been paid to its fabrication with different Ba/Sr ratios in series of samples having a given composition. Among the methods developed for thin film growth, combinatorial pulsed laser deposition (PLD) provides a unique chance to prepare continuous composition spread libraries in the plane of a single substrate at the same time Wolfman et al. 2020 . Then, the comparison of the properties of the various compounds solely depends on the local chemical composition of the sample, contrary to a batch of samples influenced by run-to-run fabrication parameter alterations that cannot be ruled out. This original growth technique offers an ideal ground for exploring the secondary ion mass spectrometry SIMS matrix effect. This effect designates variations of signal which are not related to the atomic concentration. The secondary ion intensity collected by the instrument indeed combines several factors including the concentration of the atom of interest in the bombarded material, its the sputtering yield and its ionization efficiency. The latter two depends on the chemical and morphological properties of the matrix. Therefore significant variations of the ionic intensity can occur from sample to sample independently to the atomic concentration which is further sought. Lots of efforts have been made to elucidate the effect of a matrix on the ionic yield of diluted traces. Although empirical trends have been identified very early Andersen and Hinthorne 1973 , the vast variety of the material chemistry and of the analysis conditions have made the task tedious and little success to build a unified theory for all cases have been met so far Williams 1979 . A common approach to reach SIMS quantitative measurements consists of interpolating among chemically similar standards using semi-empirical models with limited validity domains Eiler et al. 1997 . This means to track ion yields in samples with similar compositions; it can be either series of alloys Priebe et al. 2020 or multi-implanted samples Prudon et al. 2013 . Here, we report the benefits of the combinatorial chemistry to undoubtedly evidence a matrix effect in a complex oxide. We also took advantage of the sharpness of our sample interfaces to determine the depth resolution in our analysis conditions. II Experiment II.1 Sample The studied sample consists in a two oxide layers grown on a commercial SrTiO 3 substrate by combinatorial PLD. The deposition conditions detailed in Ref. Sandeep et al. 2021 . The intermediate layer of La 1.1 Sr 0.9 NiO 3 acts as a bottom electrode. The top layer is a so-called material library that is a compositionally graded film ranging from BaTiO 3 on one side to SrTiO 3 on the other side. It includes in-between every intermediate compounds Ba 1-x Sr x TiO 3 with 0\leq x\leq 1 (Fig. 1 ). The combinatorial chemistry enables to test a large number of compositions without any growth-to-growth discrepancies. In addition, all compositions are deposit on the same substrate avoiding the growth difficulties of stack of layers and the substitutional approach preserves the crystallographic structure better than implantation. Figure 1: Upper panel: scheme of the Ba and Sr content along the compositional gradient in the Ba 1-x Sr x TiO 3 layer; lower panel: sketch of the multilayer. The local chemistry of the sample was controlled by wavelength dispersive X-ray spectroscopy (WDS) and energy dispersive X-ray spectroscopy (EDS): the stoichiometric parameter of strontium increases linearly from x=0 to x=1 as it substitutes barium along the gradient axis from X=0 to X=1 cm. The quality of the growth was evidenced by X-ray diffraction showing that both out-of-plane and in-plane lattice parameters vary linearly with the strontium content in coherence with the reference compounds Sandeep et al. 2021 ; Qiu et al. 2016 . Figure 2: EDS map at the K_{\alpha} edges of titanium (a) and lanthanum (b) and their integrated profiles across the depth of the sample (d and e respectively). High-angle annular dark-field image of the mapped area labelled with the layer compositions. Detail of the La 1.1 Sr 0.9 NiO 3 /SrTiO 3 interface integrated profile of the lanthanum distribution mapped at a greater magnification (f). The chemical composition was further investigated by electron dispersive spectroscopy (EDS) analysis on a transmission electron microscope (TEM). The EDS chemical mapping was performed on a cross-section of the sample. Figure 2 reports the EDS maps for titanium (a) and lanthanum (b) as well as their integrated profiles (Fig. 2 -d,e). The three compounds of the sample are labelled on the corresponding dark field image (Fig. 2 -c). The maps and integrated profiles evidence a sharp interface between the La 1.1 Sr 0.9 NiO 3 layer and the SrTiO 3 substrate. At greater magnification, the inter-diffusion length at the interface is estimated from the half-width at the half-maximum of the profile derivative: it is less than 2 nm, close to the experimental resolution. II.2 SIMS conditions The SIMS analyses were performed with a magnetic sector analyser (IMS7f-CAMECA). To avoid surface charging, the sample surface was coated with gold (50 nm) prior analyses. We employed the Cs + / M^{+} configuration: positive primary ions with a Cs + source and detection of positive secondary M^{+} ions of mass m . The energy of the Cs + primary beam is set to 10 keV. The raster size is 150 \times 150 \mu m 2 with an analyzed zone restricted to a diameter of 33 \mu m and an electronic gate set to 70%. The analysis chamber is kept under high vacuum ( \approx 10 9 mbar). Secondary ions are detected in the positive mode by