Automatic Ply Partitioning for Laminar Composite Process Planning Volume: 44 Issue: 2

E. Garner 1,2 and A. M. Mirzendehdel 2 1 Université de Lorraine, CNRS, Inria, LORIA, Nancy, France 2 SRI International, Palo Alto, California · 2025

Read Automatic Ply Partitioning for Laminar Composite Process Planning Volume: 44 Issue: 2 by E. Garner 1,2 and A. M. Mirzendehdel 2 1 Université de Lorraine, CNRS, Inria, LORIA, Nancy, France 2 SRI International, Palo Alto, California (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-04586.txt.

Description

Eric Garner and Amir Mirzendehdel automate a composite manufacturing step in a 2025 paper on ply partitioning. Large aircraft parts are built from wide sheets of layered fiber material, but spools come narrower than the part. Each ply must therefore be split into pieces joined by seams. Those seams must not stack up and weaken the laminate.

Their method inserts fiber-aligned seams one at a time until every piece fits the available stock, respecting quality rules about seam stacking, thickness, and forbidden zones. Because single plies unroll flat, each step becomes a one-dimensional optimization solved by linear programming. A greedy global search matched exhaustive search in tests, including on a wing surface.

Catalog record

CREATORE. Garner 1,2 and A. M. Mirzendehdel 2 1 Université de Lorraine, CNRS, Inria, LORIA, Nancy, France 2 SRI International, Palo Alto, California
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-04586

Browse the full library · About the Tower of Babel