Non-unitary time dynamics of topological modes in open planar quantum systems

Saakshi Porwal, Bitan Roy · 2025

Read Non-unitary time dynamics of topological modes in open planar quantum systems by Saakshi Porwal, Bitan Roy (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-04325.txt.

Introduction

Saakshi Porwal and Bitan Roy track how protected edge states fade or revive in open quantum systems in 2025. In flat crystals, bulk math leaves special modes at edges and corners. Their study drives such a system slowly across a phase boundary. The surroundings touch the system through its energy channels. A standard open system equation governs the motion.

Survival of the special modes falls fast at short times, then holds at long times. Stronger contact with the surroundings flips which effect rules. Running the drive backward can birth modes that were absent at first. Strong mixing in the start state aids that revival. The results may guide real materials whose gaps can be tuned in time.

Catalog record

CREATORSaakshi Porwal, Bitan Roy
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE66 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-04325

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Non-unitary time dynamics of topological modes in open planar quantum systems Saakshi Porwal, Bitan Roy Abstract Nontrivial topological invariant of bulk electronic wavefunctions in two-dimensional quantum crystals leaves its footprints on the edge, dislocation, and corner modes. Here we investigate non-unitary time dynamics of these topological modes in square lattice-based open quantum systems in which the time-dependent Hamiltonian smoothly interpolates between topologically distinct insulators across band gap closing quantum critical points. The temporal dynamics of these modes is described by a Lindblad equation in which the instantaneous Hamiltonian plays the role of the Lindblad operator, thereby allowing the environment to couple with the system through the energy channels (weak measurement protocol). We show that in the presence of such a real time ramp, the survival probability of these modes decreases (increases) in short (long) time scale where the dephasing (quantum Zeno) effect dominates with the increasing amplitude of the system-to-environment coupling, for both slow and fast ramps from a topological to a normal insulating state. For a reverse course of the time evolution, the revival or condensation probability of nucleating such topological modes, otherwise absent in the initial system, increases for stronger system-to-environment coupling. This phenomenon can be attributed to the strong decoherence of the initial mixed state among all the energy eigenstates of the final Hamiltonian which also includes the topological modes, causing their enhanced condensation probability. Our findings can be germane to real open topological materials with time-tunable band gap, and should be applicable to open topological crystals of arbitrary dimension and belonging to any symmetry class. I Introduction Nature fosters a variety of topological phases of matter that can be classified into two broad categories, gapped and gapless or nodal. Both classes of topological phases can be found for charged [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 ] and neutral Majorana fermions [ 14 , 15 , 16 , 17 , 18 , 19 ] , with the later ones corresponding to topological superconductors. Irrespective of these details, all topological phases sustain gapless modes at the boundaries of the underlying host crystal, where the translational symmetry is broken. These modes are protected by the topological invariant of the bulk fermionic wave-functions, capturing their non-trivial geometry, a phenomenon known as the bulk-boundary correspondence, with our focus being restricted on two-dimensional (2D) topological insulators (TIs) in this work. Typically, a d -dimensional topological crystal features gapless modes on (d-1) -dimensional boundary. In that case, the boundary modes are characterized by the co-dimension d_{c}=d-(d-1)=1 and we realize a first-order topological phase. Therefore, a 2D first-order TI, such as the quantum anomalous Hall insulator (QAHI), supports one-dimensional topological edge modes, see Fig. 1 . The underlying mechanism responsible behind topological insulation is the band inversion that can take place either at the center of the Brillouin zone (BZ) known as the \Gamma point or at one of the finite time-reversal-invariant-momentum (TRIM) points ( {\bf K}_{\rm inv} ) therein. Finite TRIM points exist in the BZ due to the translational symmetry of the underlying lattice [ 20 ] . A TI with a finite {\bf K}_{\rm inv} is thus also named translationally active TI. Besides harboring boundary modes, they also respond nontrivially in the presence of underlying lattice defects, such as dislocations, realized in the interior of the lattice by breaking the translational symmetry locally around the core of such crystal defects. Dislocation lattice defects are characterized by the Burgers vector {\bf b} . In particular, when {\bf K}_{\rm inv}\cdot{\bf b}=\pi (modulo 2\pi ), midgap zero-energy modes get pinned around the core of dislocation lattice defects. The {\bf K}\cdot{\bf b} rule is otherwise operative in static, dynamic or Floquet, and non-Hermitian topological crystals [ 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 ] . An example of such dislocation modes in a QAHI with the band inversion at the {\rm M}=(\pi,\pi)/a point of the BZ is shown in Fig. 2 , where a is the lattice spacing of the underlying square lattice. On the other hand, when the band inversion occurs at the \Gamma=(0,0) point of the BZ, {\bf K}_{\rm inv}\cdot{\bf b}=0 , and the resulting TI does not host any midgap zero-energy dislocation modes. Figure 1: (a) Energy ( E ) spectra of the static Qi-Wu-Zhang model Hamiltonian [Eq. ( 1 )] on a square lattice with open boundary conditions in the x and y directions for t_{1}=t_{0}=m_{0}=1 , yielding the \Gamma phase with the band inversion at the \Gamma point of the Brillouin zone. Here, n is the eigenvalue index. Inset shows two closest to zero-energy modes. (b) The local density of states of those two near zero-energy modes is highly localized near the edges of the square lattice. (c) Phase diagram of the Qi-Wu-Zhang model. The real time ramp out of (into) the \Gamma phase to (from) other insulating phases are shown by solid (dashed) arrows, labeled by Roman numerals. The corresponding dynamic melting (condensation) of the edge modes are shown in Figs. 4 - 7 (Fig. 15 ). Here, TI (NI) stands for topological (normal) insulator. Specifically in d>1 , it is also conceivable to identify topological crystals harboring gapless modes on boundaries with integer co-dimension d_{c}=n>1 , such as the corners and hinges. Together they constitute the family of higher-order topological phases. Namely, an n th order topological phase hosts robust topological modes, living on boundaries with d_{c}=n [ 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 , 44 , 45 , 46 , 47 , 48 , 49 ] . Therefore, in d=2 besides the first-order TIs, we also find second-order topological insulators (SOTIs) displaying zero-energy modes localized near four corners of a square lattice, for example, as shown in Fig. 3 . Therefore, leaving aside their weak cousins 1 1 1 The following classification encompasses 2D strong TIs in which the boundary and defect modes are protected by a topological invariant defined on a 2D BZ (in momentum space) or a square lattice (real space), leaving aside the weak TIs that for example can be realized by translational invariant stacking (in the y direction) of x directional one-dimensional topological Su–Schrieffer–Heeger insulators [ 50 , 51 , 52 ] . The resulting weak TI (or Dirac semimetal) supports Fermi arc edge modes, but only on the y directional edges. Our results are qualitatively applicable for such topological modes as well. , the landscape of TIs can be broadly classified into three categories that support edge modes (first-order TIs), dislocation modes (translationally active TIs), and corner modes (SOTIs). Their relationship with the bulk topological invariant is well understood in closed static [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 ,

Read the complete text