A data-driven two-microphone method for in-situ sound absorption measurements
Leon Emmerich, Patrik Aste, Eric Brandão, Mélanie Nolan, Jacques Cuenca, U. Peter Svensson, Marcus Maeder, Steffen Marburg, Elias Zea · 2025
Read A data-driven two-microphone method for in-situ sound absorption measurements by Leon Emmerich, Patrik Aste, Eric Brandão, Mélanie Nolan, Jacques Cuenca, U. Peter Svensson, Marcus Maeder, Steffen Marburg, Elias Zea (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-04143.txt.
Introduction
Leon Emmerich and co-authors measure how much sound a porous material soaks up on site, using two microphones and a neural network, in work from 2025. Lab tubes give clean numbers, but real walls and panels are finite and already installed. The classic two-microphone field method suffers from those edges.
A compact network reads the pressure link between the two microphones and predicts the soaking rate of an endless slab. Training used simulated data from a boundary model with a standard foam law. Bench tests on fiber samples of varied size and source height matched tube and theory values well. The method could rate installed materials in place, without cutting samples.
Catalog record
| CREATOR | Leon Emmerich, Patrik Aste, Eric Brandão, Mélanie Nolan, Jacques Cuenca, U. Peter Svensson, Marcus Maeder, Steffen Marburg, Elias Zea |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 46 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-04143
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A data-driven two-microphone method for in-situ sound absorption measurements Leon Emmerich, Patrik Aste, Eric Brandão, Mélanie Nolan, Jacques Cuenca, U. Peter Svensson, Marcus Maeder, Steffen Marburg, Elias Zea Abstract This work presents a data-driven approach to estimating the sound absorption coefficient of an infinite porous slab using a neural network and a two-microphone measurement on a finite porous sample. A 1D-convolutional network predicts the sound absorption coefficient from the complex-valued transfer function between the sound pressure measured at the two microphone positions. The network is trained and validated with numerical data generated by a boundary element model using the Delany-Bazley-Miki model, demonstrating accurate predictions for various numerical samples. The method is experimentally validated with baffled rectangular samples of a fibrous material, where sample size and source height are varied. The results show that the neural network offers the possibility to reliably predict the in-situ sound absorption of a porous material using the traditional two-microphone method as if the sample were infinite. The normal-incidence sound absorption coefficient obtained by the network compares well with that obtained theoretically and in an impedance tube. The proposed method has promising perspectives for estimating the sound absorption coefficient of acoustic materials after installation and in realistic operational conditions. I Introduction Determining the sound absorption behavior of acoustic materials in their intended application is of great interest in various engineering contexts. In contrast to impedance tube measurements [ 1 , 2 ] or measurements in a reverberation chamber [ 3 ] , in situ and free-field measurement methods make it possible to obtain angle-dependent absorption data. These methods generally rely on an analytical model of the sound field above the sample [ 4 ] , allowing to determine its sound absorption properties from simple measurements of the sound pressure in its vicinity [ 5 , 6 , 7 , 8 , 9 ] . Existing models to describe the acoustic field can be divided according to their wave propagation assumption into plane-wave models and spherical-wave models. Although the plane-wave approximation holds for large source-sample distances or high frequencies, the spherical wave assumption also applies to lower frequencies [ 4 , 8 ] .A comprehensive review of in situ methods up to 2015 can be found in [ 4 ] and several more recent methods have been proposed in [ 10 , 11 , 7 , 12 , 13 , 14 , 15 ] . Despite their attractiveness compared to standardized methods, the underlying models used to retrieve the sound absorption properties generally rely on the assumption that the sample of interest has infinite dimensions. This assumption is not verified in actual measurements of finite-sized samples, leading to uncertainties in the inferred absorption properties. Typically, these uncertainties introduce oscillatory artifacts in the sound absorption coefficient at low frequencies [ 16 , 17 , 18 ] . This so-called edge effect or edge-diffraction effect is especially noticeable for increasing wave incidence angles and decreasing sample sizes [ 16 , 19 , 18 , 20 , 21 , 17 , 22 ] . Additionally, the edge diffraction is larger for greater source distances in relation to the sample and increasing distance between the sensors and the sample [ 18 ] . In recent years, considerable effort has been devoted to modeling and mitigating edge diffraction effects. Brandão et al. [ 18 ] simulated the edge-diffraction effect of finite-sized samples using a Boundary Element Method (BEM). The edge diffraction resulted in a measured absorption coefficient that oscillates around the absorption coefficient of the corresponding infinite sample. The simulated sound absorption coefficients affected by edge-diffraction effects showed close accordance to the sound absorption calculated from actual measurements. Ottink et al. [ 23 ] proposed an experimental microphone-array method combined with a sound field model accounting for the finiteness of the sample. The approach yielded fairly good results for wave incidence angles up to 85^{\circ} . Finally, Brandão and Fernandez-Grande [ 24 ] numerically investigated the wavenumber spectrum above finite samples to characterize the edge effect and reconstruct the surface impedance. Following a different approach, several studies have made use of machine-learning approaches to investigate the sound absorption behavior of sound absorptive materials [ 25 , 26 , 27 , 28 , 29 , 30 , 31 ] . Eser et al. [ 30 ] showed that it is possible to predict the frequency-dependent and complex-valued surface impedance using 1D-convolutional neural networks while maintaining the frequency resolution. However, the method is based on impedance tube measurements and does not allow a direct investigation of a material’s angle-dependent sound absorption behavior. Zea et al. [ 32 ] presented a deep-learning approach to predict the angle-dependent sound absorption coefficient at 14 octave-band frequencies from absolute sound pressure spectra measurements at 12\times 12 microphone positions above the absorber. A 2D residual neural network was trained and validated using numerical data generated by a BEM and the Delany-Bazley-Miki (DBM) model [ 33 , 34 ] . The approach showed reasonable generalization abilities for various sample parameters and numerical setups, but its experimental success was limited [ 35 ] . Müller-Giebeler et al. [ 36 ] proposed a hybrid physics- and data-driven model to inversely estimate the Johnson-Champoux-Allard-Lafarge (JCAL) parameters of finite porous materials above a rigid floor. The main idea was to fit the sound pressure measured above the sample with the sum of an analytical specular sound field and the edge-diffracted sound field produced by a neural network, both of these fields being functions of the set of JCAL parameters. The approach was experimentally validated with various kinds of wool and PU foam of various square sizes. While both methods in [ 32 ] and [ 36 ] can produce angle-dependent absorption coefficients, the methods differ in (i) their material models (DBM vs. JCAL), (ii) experimental effort (microphone array vs. single microphones; baffled vs. unbaffled samples), and (iii) target function (sound absorption coefficient spectrum vs. scalar values of JCAL parameters). This work proposes a deep-learning approach to predict the free-field absorption coefficient of finite-sized samples using the well-recognized and comparatively simple two-microphone method [ 37 , 38 ] . In this way, the proposed method enables the determination of the sound absorption behavior of the material with a widely used technique. The methodology entails a 1D residual neural network trained to predict the angle-dependent sound absorption coefficient between 100\text{\,}\mathrm{Hz} and 2000\text{\,}\mathrm{Hz} from measurements of the complex-valued transfer function between the spectra of the two microphones. The network is trained and validated on BEM simulations of porous absorbers similar to those in Zea et al. [ 34 ] . Furthermore, the network is experimentally tested with two fibrous samples of different sizes, varying incidence angles, and source positions. The absorption coefficients predicted by the network are compared with those obtained with impedance tube measurements at normal incidence and analytical predictions from the DBM model. The paper is organized as follows. Section II summarizes the two-microphone method and the boundary element method. Section III explains the numerical data generation and the sound absorption measurements and introduces the proposed neural network. Section IV evaluates and discusses the performance of the proposed method using numerical data and measurements on porous absorbers. II Theory II.1 Two-microphone method The two-microphone method