Beamforming with Joint Phase and Time Array: System Design, Prototyping and Performance
Jianhua Mo, Ahmad AlAmmouri, Shenggang Dong, Younghan Nam, Won-Suk Choi, Gary Xu, and Jianzhong (Charlie) Zhang · 2025
Read Beamforming with Joint Phase and Time Array: System Design, Prototyping and Performance by Jianhua Mo, Ahmad AlAmmouri, Shenggang Dong, Younghan Nam, Won-Suk Choi, Gary Xu, and Jianzhong (Charlie) Zhang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-00139.txt.
Introduction
Jianhua Mo and six co-authors design and build a new radio front end for millimeter-wave base stations. Their paper is from two thousand twenty-five. Standard beam forming uses phase shifters to aim one beam per radio chain. Adding true time delay parts lets one chain form several beams at once, each at a different frequency and pointing a different way.
That trick lets one base station serve several users in different directions at the same time. Simulations showed the reach of uplink coverage could double. The catch is the need for delay parts with fine steps and a wide range. With new delay parts in hand, the team built a working unit. One radio chain served four users in four directions in their demo.
Catalog record
| CREATOR | Jianhua Mo, Ahmad AlAmmouri, Shenggang Dong, Younghan Nam, Won-Suk Choi, Gary Xu, and Jianzhong (Charlie) Zhang |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2502-00139
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Beamforming with Joint Phase and Time Array: System Design, Prototyping and Performance Jianhua Mo, Ahmad AlAmmouri, Shenggang Dong, Younghan Nam, Won-Suk Choi, Gary Xu, and Jianzhong (Charlie) Zhang Abstract Joint phase-time arrays (JPTA) is a new mmWave radio frequency front-end architecture constructed with appending time-delay elements to phase shifters for analog beamforming. JPTA allows the mmWave base station (BS) to form multiple frequency-dependent beams with a single RF chain, exploiting the extra degrees of freedom the time-delay elements offer. Without requiring extra power-hungry RF chains, a BS with JPTA can schedule multiple users in different directions in a frequency-division multiplexing (FDM) manner. A BS with JPTA achieves various advantages over the traditional analog beamforming system. Simulation results show that JPTA can bring significant system-level benefits, e.g., extending uplink throughput coverage by 100%. To realize these system benefits of JPTA, high-resolution delay elements with a wide delay dynamic range are essential. With newly developed delay elements, we demonstrate that a single TRX RF chain can serve four users in four different directions in the mmWave band. {jianhua.m, ahmad1.a, s.dong, younghan.n, wswill.choi, gary.xu, jianzhong.z}@samsung.com I Introduction Millimeter-wave (mmWave) technology represents a pivotal advancement in 5G cellular systems, harnessing the vast potential of the mmWave spectrum to deliver unprecedented data rates. This technology capitalizes on the abundant yet underutilized bandwidth in the mmWave band, promising significantly enhanced network performance and user experiences. However, despite its immense potential, mmWave technology comes with challenges primarily stemming from the high pathloss characteristics inherent to mmWave frequencies. The propagation characteristics of mmWave signals are characterized by high attenuation and susceptibility to environmental obstacles, such as buildings and foliage, which significantly limit the coverage area of cellular networks operating in this frequency range. To overcome the limitations imposed by high pathloss, extensive research efforts have been dedicated to developing innovative solutions for enhancing coverage and improving the overall efficiency of mmWave-based cellular systems. One of the key strategies adopted in 5G standards is utilizing large-antenna narrow beamforming techniques [ 1 ] . By employing large antenna arrays and focusing transmission beams into narrow beamwidth, beamforming enables the concentration of signal power towards desired users or areas, thereby mitigating the adverse effects of pathloss and extending the reach of mmWave networks. Despite the effectiveness of beamforming in enhancing coverage, the implementation of large antenna arrays presents challenges, particularly in terms of power consumption and hardware costs. Fully digital beamforming can incur significant power consumption and hardware expenses while offering precise control over beamforming parameters. In response to these challenges, analog beamforming has emerged as a cost-effective alternative, offering a simplified architecture that reduces the complexity and hardware requirements associated with fully digital implementations. Analog beamforming systems typically consist of a single digital transceiver unit (TRX or RF chain) connected to an antenna panel housing multiple antennas. However, the adoption of analog beamforming introduces what is known as the “analog beamforming constraint,” limiting the system to utilizing only a single analog beam across the entire system bandwidth within a given time duration. This constraint can lead to inefficient utilization of available bandwidth, increased scheduling latency, and decreased user throughput, particularly in scenarios with varying traffic demands and channel conditions. To address the limitations of analog beamforming and enhance the flexibility of beamforming operations, hybrid analog-digital beamforming (HBF) techniques have been proposed [ 2 , 3 , 4 , 5 ] . These techniques involve the incorporation of additional TRXs and phase shifter arrays, allowing for more sophisticated beamforming capabilities while minimizing the associated costs and power consumption. However, integrating extra hardware components introduces challenges, including increased complexity and signal processing requirements, which can impact system performance and scalability. In light of these challenges, there is a growing interest in exploring alternative beamforming architectures that balance cost-effectiveness and performance. One such architecture is the joint phase-time array (JPTA), which integrates true-time-delay (TTD) units alongside traditional phase shifters and switches used in analog and hybrid beamforming [ 6 , 7 , 8 ] . By leveraging TTD units to introduce frequency-dependent phase shifts, JPTA offers enhanced flexibility in beamforming operations, enabling the creation of optimized beam patterns tailored to specific environmental conditions and user requirements. Moreover, compared to conventional approaches involving multiple TRXs, JPTA presents a more cost-effective solution for enabling multi-beam operations, making it an attractive option for future mmWave-based cellular systems. JPTA is also called TTD beamforming, delay-phased array (DPA), delay phase precoding (DPP), and TTD-based hybrid precoding in the literature [ 9 , 10 , 11 , 12 , 13 ] . The rest of the paper is organized as follows: Section II discusses the JPTA architecture and provides two critical types of JPTA beams. Section III presents the prototyping of JPTA beamforming, which serves four users simultaneously. The simulation setup and the simulation results are discussed in Section IV before concluding in Section V . II JPTA Beamforming In this section, we introduce the JPTA architecture, the beam design of JPTA, and its comparison with HBF. Fig. 1: The considered JPTA architecture, where each antenna element is connected through a delay unit and a PS. II-A JPTA Architecture The JPTA architecture is shown in Fig. 1 . Each antenna is connected through an adjustable time delay (TD) element and an adjustable phase shifter (PS). Then all the antenna branches are connected through a single TRX (or called RF chain). Compared to the traditional phased antenna array, the key difference is the extra delay elements. Mathematically, the M\times 1 downlink transmitted signal on sub-carrier k is, \displaystyle\mathbf{x}_{k} \displaystyle=\underbrace{\frac{1}{\sqrt{M}}\begin{bmatrix}e^{{\mathrm{j}}\phi_{1}}&0&\ldots&0\\ 0&e^{{\mathrm{j}}\phi_{2}}&\ldots&0\\ \vdots&\vdots&\ddots&\vdots\\ 0&0&\ldots&e^{{\mathrm{j}}\phi_{M}}\end{bmatrix}}_{\mathbf{T}}\underbrace{\left[\begin{array}[]{c}e^{{\mathrm{j}}2\pi f_{k}\tau_{1}}\\ e^{{\mathrm{j}}2\pi f_{k}\tau_{2}}\\ \vdots\\ e^{{\mathrm{j}}2\pi f_{k}\tau_{M}}\end{array}\right]}_{\mathbf{d}_{k}}s_{k} \displaystyle=\underbrace{\frac{1}{\sqrt{M}}\begin{bmatrix}e^{{\mathrm{j}}\phi_{1}+2\pi f_{k}\tau_{1}}\\ e^{{\mathrm{j}}\phi_{2}+2\pi f_{k}\tau_{2}}\\ \vdots\\ e^{{\mathrm{j}}\phi_{M}+2\pi f_{k}\tau_{M}}\end{bmatrix}}_{\mathbf{p}_{k}}s_{k}, (5) where \phi_{m} is the phase of the m -th phase shifter, \tau_{m} is the delay of the m -th delay element, and s_{k} is the modulation symbol on the k -th sub-carrier f_{k} . {\mathbf{T}} stands for the phase shifts applied to the M antennas, and is independent of the frequency. {\mathbf{d}}_{k} represents the phase drift caused the delay elements at the frequency f_{k} . The phase drift, i.e., 2\pi f_{k}\tau_{m} , is frequency-dependent. The aggregated phase change in JPTA is denoted as {\mathbf{p}}_{k} , which is also frequency-dependent. II-B JPTA Beam Generation (a) Type-1 JPTA Beam: Discrete-angle beam (b) Type-2 JPTA Beam: Rainbow beam or continuous-angle beam Fig. 2: A simple illustration of Type-1 and Type-2 JPTA Beams. Two types of JPTA beam patterns shown in Fig. 2 are considered in this paper. II-B 1 Type-1 JPTA Beam Type-1 beam pattern refers to steering in multiple distinct, discrete directions. In an example shown in Fig. 2(a) , the whole frequency band is split into two subbands steered to two users separately. Denote {\mathbf{b}}_{k} as the desired beamforming weight vector at k-th sub-carrier. For a uniform linear array with antenna spacing d , the steering vector pointing to the direction \theta_{k} at the frequency f_{k} is, \displaystyle{\mathbf{b}}_{k}=\frac{1}{\sqrt{M}}\left[1,\ e^{\mathrm{j}\frac{2\pi df_{k}\cos\theta_{k}}{c}},\cdots,\ e^{\mathrm{j}\frac{2\pi(M-1)df_{k}\cos\theta_{k}}{c}}\right]^{T} (6) where c is the speed of light. We formulate an optimization problem to minimize the total difference between {\mathbf{p}}_{k} and {\mathbf{b}}_{k} over all the sub-carriers: \displaystyle\mathbf{\tau},\mathbf{\phi}=\argmin_{\left\{\tau_{m},\phi_{m}\right\}}\sum_{k}\lVert\mathbf{p}_{k}-\mathbf{b}_{k}\rVert^{2}. (7) The optimization problem can be solved by an iterative algorithm proposed in [ 6 ] or a heuristic single-shot solution in [ 12 ] . Type-1