TABASCAL: Removing multi-satellite interference from radio interferometry observations

C. Finlay, B. A. Bassett, M. Kunz, N. Oozeer · 2025

Read TABASCAL: Removing multi-satellite interference from radio interferometry observations by C. Finlay, B. A. Bassett, M. Kunz, N. Oozeer (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-00106.txt.

Introduction

Chris Finlay and three co-authors removed satellite interference from radio astronomy observations, in a paper published in 2025. Passing satellites flood radio telescopes with junk signals that swamp the sky. Their tool fits each junk source's path and signal, then subtracts it, while it calibrates the telescope at the same time. They test it on simulated MeerKAT data mixed with up to nine satellites at once.

The tool coped from weak interference to blasts a thousand times the scale of the sky signal. Cleaned maps reached the same noise floor as interference-free data. For point source work, detections ran near complete at all interference levels. Standard flagging tools, by contrast, lost most sources at high interference and left flux errors ten to a hundred times worse. The authors say path fitting beats flagging.

Catalog record

CREATORC. Finlay, B. A. Bassett, M. Kunz, N. Oozeer
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE111 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-00106

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

TABASCAL: Removing multi-satellite interference from radio interferometry observations C. Finlay, B. A. Bassett, M. Kunz, N. Oozeer Abstract In the first trajectory-based radio frequency interference (RFI) subtraction and calibration (TABASCAL) paper, we showed how to calibrate radio interferometers in the presence of RFI sources by simultaneously isolating the trajectories and signals of the RFI sources. In this paper, we show that we can accurately remove RFI (i.e. recover the astronomical signal) from simulated MeerKAT radio interferometry target data. We are able to do so for a single frequency channel, corrupted by up to nine simultaneous satellites, with average RFI amplitudes varying from weak to very strong ( 1 − 10 3 1-10^{3} Jy). Additionally, TABASCAL also manages to leverage the signal-to-noise ratio (S/N) of the RFI to phase-calibrate the astronomical signal. TABASCAL, effectively performs a suitably phased up fringe filter for each RFI source, which essentially allows for an ideal removal of RFI across all RFI strengths. As a result, TABASCAL is able to reach image noises equivalent to the uncorrupted, no-RFI, case. For larger RFI amplitudes, the resulting image noise is 10x - 100x smaller than those from traditional RFI flagging methods such as AOFLAGGER. As a specific application, we show that point-source science with TABASCAL almost matches the no-RFI case with near perfect completeness for all RFI amplitudes. In contrast, the completeness of AOFLAGGER and idealised 3 ​ σ 3\sigma flagging drops below 40% for strong RFI amplitudes, where recovered flux errors are approximately 10x - 100x worse than those from TABASCAL. Finally, we note that TABASCAL works for astronomical sources with both static and varying fluxes. 1 Introduction Radio astronomy has profoundly transformed our understanding of the universe by enabling the study of celestial objects through the detection of radio waves. These extremely faint cosmic signals face a growing threat from radio frequency interference (RFI), which is becoming increasingly problematic as the radio spectrum becomes more crowded due to advancements in modern technology. Defined as unwanted radio emissions that disrupt astronomical observations ( Kocz et al. 2010 ) , RFI arises from various sources such as terrestrial broadcast systems, cellular networks, satellite communications, and everyday electronic devices. Thus, it presents a formidable challenge in radio astronomy, compromising the quality and quantity of astronomical data, and thereby hindering our exploration of the universe. As the sensitivity of modern radio telescopes continue to improve, these instruments face an increasingly invasive RFI environment. These radio signals, which often overlap with the frequency bands used for science, tend to obscure, distort, or mimic the faint astrophysical emissions astronomers aim to detect. The proliferation of communication technologies has exacerbated this issue. For instance, satellite constellations designed for global internet coverage, such as SpaceX’s Starlink, have been shown to unintentionally emit RFI at low frequencies including in the protected bands of radio astronomy ( Di Vruno et al. 2023 ; Grigg et al. 2023 ; Bassa et al. 2024 ) . No doubt, the increasing prevalence of these satellite constellations will lead to a worsening of the RFI environment for telescopes across the globe. Similarly, terrestrial sources such as mobile phone networks and radar systems add to the pervasive RFI environment, particularly in densely populated areas. Although international guidelines, such as those established by the International Telecommunication Union, provide some safeguards for radio astronomy, the dynamic and evolving nature of RFI demands more adaptive and sophisticated mitigation strategies. This paper is structured as follows. Section 2 discusses the current state of post-correlation RFI mitigation approaches. Section 3 briefly describes the trajectory-based RFI subtraction and calibration (TABASCAL) algorithm and its intrinsic workings. In Section 4.1 , we describe the basics of Bayesian inference (i.e. Gaussian processes), how they are used to interpolate, and how they can be used as a fringe rate filter. In Section 4.2 , we describe the full Bayesian forward model, how we set our priors based on sound theoretical footing, some of the intricacies when modelling RFI sources accurately, and the computational considerations to allow this method to effectively scale up. In Section 4.3 , we discuss parameter transformations used to effectively perform optimisation in such a large parameter space as well as an optional method to obtain posterior uncertainty estimates in a scalable manner. In Sections 5.1 and 5.2 , we describe the simulation set we generated to test TABASCAL and how we compare our results. In Section 6.1 , we analyse the performance of TABASCAL in the raw, recovered visibilities. In Sections 6.2 and 6.3 , we discuss the performance of TABASCAL recovered visibilities in the image domain, both in terms of image noise and artefacts and point source recovery. TABASCAL’s phase calibration capabilities are analysed in Section 6.4 . The robustness of the prior distribution and potential improvements of the method are discussed in Section 7 . Finally, in Section 8 , we summarise the method and our key results. 2 RFI mitigation There are numerous RFI mitigation strategies and in general it needs to be a multi-faceted approach at any given observatory. For reviews on RFI mitigation strategies see Kesteven (2010) , Briggs & Kocz (2005) & Fridman & Baan (2001) . Among the various mitigation strategies we are interested in offline post-correlation strategies. Post-correlation approaches to RFI mitigation fall broadly into two categories: (1) flagging and (2) subtraction or removal. Flagging is the process of identifying contaminated data samples and flagging them in a way that they are not included in any further downstream data analysis. The second category is removal or subtraction, which our method TABASCAL falls into. Currently, flagging methods fall into three categories: (1) traditional, (2) machine learning, and (3) modified likelihood. One of the most prevalent methods for traditional flagging is AOFLAGGER ( Offringa 2010 ) , based on the SUMTHRESHOLD ( Offringa et al. 2010 ) algorithm. In the past several years, there has been a lot of work on using machine learning for RFI flagging, such as the work of Mosiane et al. (2016) and, specifically, deep learning triggered by Akeret et al. (2017) . Notable deep learning examples are from Kerrigan et al. (2019) and ( Vafaei Sadr et al. 2020 ) as they apply to radio interferometric data. Finally, standing as potential flagging counterparts to our method are modified likelihood models such as Mhiri et al. (2022) ; Leeney et al. (2023) ; Anstey & Leeney (2024) ; Mhiri et al. (2024) . We note that the BEAMS formalism, introduced in Kunz et al. (2007) to deal with supernova contamination, can enable the efficient computation of the full Bayesian posterior for RFI flagging. We refer to these methods as modified likelihood as they do not assume the standard Gaussian likelihood appropriate for thermal noise alone; rather, they modify it to include a contribution from outliers such as RFI contamination. RFI flagging is a staple at radio observatories across the world, however, flagging comes at a cost. For example, with respect to observations by the MeerKAT telescope ( Jonas 2018 ) , Sihlangu et al. (2021) presented a detailed analysis of 200 TB of data, (around 1500 observation hours). This analysis showed that more than 23% of all L-band data is currently lost to RFI, with 37% of

Read the complete text