LiDAR for Robust Exoatmospheric Positioning

L.M. Arthur, R.S. Kemp · 2025

Read LiDAR for Robust Exoatmospheric Positioning by L.M. Arthur, R.S. Kemp (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2502-00091.txt.

Introduction

Arthur and Kemp propose a LiDAR method for positioning spacecraft above the atmosphere in twenty twenty-five. Their system has a transmitter and a receiver, both based on the craft itself. It uses intensity modulated direct detection. A constellation of orbital reflectors returns the signals. The paper discusses how precise the method can be and how much power it needs. It also weighs the method against GPS and other navigation satellite systems now in use. It ends by setting out where such a method could be put to work.

Catalog record

CREATORL.M. Arthur, R.S. Kemp
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2502-00091

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

LiDAR for Robust Exoatmospheric Positioning L.M. Arthur, R.S. Kemp Abstract We present an active method for robust exoatmospheric positioning using space-based intensity modulated direct detection (IMDD) LiDAR with a spacecraft-based transmitter and receiver and a constellation of orbital reflectors. We discuss the precision of the method, the power requirements, the advantages of such a method over existing GPS/GNSS systems, and potential applications. I Introduction Many spacecraft require position and velocity information to plan and execute maneuvers for orbital insertion, rendezvous, or reentry. While early space missions did not require precision, modern applications such as satellite servicing and maintenance, the use of reusable launch vehicles, intercontinental ballistic missile guidance and intercept, and some satellite-to-satellite communications, require precise positioning and velocity information. Global Navigation Satellite Systems (GNSS), such as the United States’ Global Positioning System (GPS), can be used for precise positioning both on the Earth’s surface and in low Earth orbit (LEO). [ 1 ] However, current GNSS systems use a small number of large, complex, and expensive satellites, which cannot be repaired or promptly replaced, meaning that disabling only a few satellites could disrupt the system over a large area. The low received power and the long distances involved also mean that GNSS is susceptible to signal spoofing and jamming. [ 2 ] In the face of proliferating anti-satellite weapons and electronic warfare systems, it may be a priority for governments and commercial entities to seek an alternative method of space navigation that is more robust against interference from adversaries. An existing alternative to GNSS is the use of ground-based tracking. However, radar and optical signals are subject to atmospheric distortions, degrading positional accuracy. Persistent tracking with extended integration times can overcome atmospheric distortions, but this is not suitable for guiding short time-scale maneuvers. Additionally, the limited view of a single ground station means that a large network would be required for persistent tracking throughout an orbit or trajectory, and tracking may be unavailable over contested or remote regions of Earth. Ground tracking is also subject to adversarial disruption. Ground data must be aggregated from a distributed network of stations and transmitted promptly to the vehicle, during which time it may be subject to jamming, spoofing, or other interference. We introduce a more robust approach to space navigation that uses autonomous multilateration against positional fiducials, or benchmarks in the language of geodesy. This avoids trans-atmospheric signals and does not depend on jammable GNSS satellites. Distances to benchmarks can be determined by time-of-flight measurements. In space, however, a benchmark’s position is time dependent as it orbits the Earth. Correspondingly, a benchmark’s location must be estimated using its orbital ephemerides and a precise clock. The exoatmospheric approach is resistant to disruption because the position measuring system is space-based, self-contained, and can take advantage of a large number of brightly reflecting orbiting objects as benchmarks. II LiDAR for Distance Ranging In principle, RADAR, LiDAR, or any other time-domain reflectometry can be used to estimate the range to a benchmark. We illustrate the proposed method using Intensity Modulated Direct Detection (IMDD) LiDAR. We judge that a LiDAR-based system is likely to be more robust to interference from off-axis (sidelobe) signals. LiDAR hardware has already been demonstrated in space for applications such as altimetry and remote sensing of planetary surfaces, and has been used for relative positioning of spacecraft for rendezvous and docking. [ 3 , 4 ] Long-range lasers have also been used for optical communications in space, such as in the ongoing Deep Space Optical Communications (DSOC) project, and have even been demonstrated at interplanetary ranges. [ 5 ] The range to a reflecting benchmark can be determined using the signal time-of-flight, which, when unimpeded by atmospheric effects, is simply: R=\frac{c\Delta t}{2} (1) If four or more reflector satellites are within the vehicle’s field of view and transmitter range, multilateration can provide a fully-constrained position measurement to update the navigation software’s state estimate for the vehicle. The positions of the reflectors must be known to the vehicle in advance. That can be achieved by pre-loading a set of orbital models for all well-tracked brightly reflecting benchmark objects (see Section III ) into the vehicle’s guidance computer. This dataset must be established in advance and maintained using ground-based tracking systems. However, unlike ground-based tracking of a maneuvering vehicle, only a small number of ground stations are required for determining orbital ephemerides. These ground-based stations can be located in protected territory, and no ground-to-space communication is needed. Intensity modulated direct detection (IMDD) is a LiDAR approach that allows for the precise measurement of signal time of flight with a pseudo-random noise (PRN) sequence and without requiring a frequency modulated laser or an optical local oscillator to detect the frequency modulations. A photodetector could register the intensity of the returned signal, and the time of flight could be determined by cross-correlating the received signal with the transmitted signal. This approach allows for the disambiguation of multiple returns. Optical intensity modulation at frequencies above 1 GHz and transmitted powers above 100 mW have been demonstrated. [ 6 ] As we show below, this could be used to achieve nanosecond precision and provides sufficient power for the ranges over which the laser might operate. II-A Accuracy and Error Analysis The error in the estimated position of the vehicle depends on the uncertainty in the measured round trip time-of-flight to the reflectors, and on the accuracy with which the positions of the reflectors are known. The accuracy of the estimated position of the reflectors depends, in turn, on the error in the absolute timekeeping and the accuracy of the ephemerides of the reflectors in the reflector database. The PRN signal modulated at gigahertz frequencies allows for time-of-flight measurements with nanosecond precision from point-source reflectors. [ 6 , 7 ] This contribution to the vehicle’s position uncertainty scales linearly with the time of flight uncertainty. A 1 ns uncertainty in the time of flight corresponds to a 0.15 m uncertainty in the position from a single measurement. For n pulses, the range uncertainty \sigma_{n} can be related to the single-pulse uncertainty \sigma_{sp} by the square root of the number of pulses. \sigma_{n}\approx\frac{\sigma_{sp}}{\sqrt{n}} (2) For a one hundred bit PRN, up to 10^{7} measurements could be made per second. Only 10^{5} measurements are needed to suppress the aleatoric uncertainty to the millimeter scale. Reflected signals are convolutions of the transmitted signature and the reflector geometry. For well-characterized reflectors, the convolution can be known in advance, and the centroid can be identified to millimeter accuracy, as demonstrated by the International Laser Ranging Service (ILRS) for geodesy reflectors. [ 7 ] Reflectors for which deconvolution is not possible produce degraded range measurements, with errors on the scale of the radius of the reflector. The locations of the reflector satellites are estimated from pre-loaded ephemerides evaluated during flight. Use of the ephemerides database requires the guidance system to maintain absolute timekeeping, calibrated to the time standard used by the ground tracking system that established the corresponding ephemeris. The onboard time standard could be calibrated to the ground tracking system prior to launch with 10 ns accuracy, matching GPS timekeeping standards. [ 1 ] The standard could then be maintained during the duration of the

Read the complete text