Strong geometry dependence of the X-ray Thomson Scattering Spectrum in single crystal silicon

Thomas R. Preston, D-22869 Schenefeld, any · 2025

Read Strong geometry dependence of the X-ray Thomson Scattering Spectrum in single crystal silicon by Thomas R. Preston, D-22869 Schenefeld, any (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-19276.txt.

Introduction

Scattering X-rays off a crystal can reveal how its electrons move, but the reading depends on the angle of the setup. Gawne and co-authors measure that effect in single crystal silicon in a 2025 study at a European X-ray laser site. Their setup lets the scattering direction turn through the crystal as the shot runs.

With fine resolution, they saw strong shifts in the scattered spectrum at low angles. Top computer models of electron motion matched those shifts well. The match backs the models for use on other hard materials. Data also came in far faster than in a prior run on the same rig. Fast, sharp reads widen what such lasers can probe.

Catalog record

CREATORThomas R. Preston, D-22869 Schenefeld, any
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-19276

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Strong geometry dependence of the X-ray Thomson Scattering Spectrum in single crystal silicon Thomas R. Preston, D-22869 Schenefeld, any Abstract We report on results from an experiment at the European XFEL where we measured the x-ray Thomson scattering (XRTS) spectrum of single crystal silicon with ultrahigh resolution. Compared to similar previous experiments, we consider a more complex scattering setup, in which the scattering vector changes orientation through the crystal lattice. In doing so, we are able to observe strong geometric dependencies in the inelastic scattering spectrum of silicon at low scattering angles. Furthermore, the high quality of the experimental data allows us to benchmark state-of-the-art TDDFT calculations, and demonstrate TDDFT’s ability to accurately predict these geometric dependencies. Finally, we note that this experimental data was collected at a much faster rate than another recently reported dataset using the same setup, demonstrating that ultrahigh resolution XRTS data can be collected in more general experimental scenarios. 1 Introduction The electronic dynamic structure factor (DSF) S(\bm{q},\omega) of a system is rich with information on its electronic properties. The DSF depends on a number of important system properties – such as its temperature, density, and ionization – and contains information on electron correlations and their localization around ions [ 1 , 2 , 3 , 4 ] . Experimentally, the DSF can be probed directly using the x-ray Thomson scattering (XRTS) technique [ 5 ] . By probing a sample with photons of incident energy E_{i} and measuring the spectrum of the scattered photons E_{s}=E_{i}-\hbar\omega along a particular scattering vector \bm{q} , the resulting XRTS spectrum I(\bm{q},E_{s}) is the convolution of the DSF with the combined source-and-instrument function (SIF) R(E_{s}) of the experiment [ 1 , 5 , 6 ] : I(\bm{q},E_{S})=R(\bm{q},E_{s})*S(\bm{q},E_{s}-E_{i})\,. (1) Given the potential of XRTS to provide the full information about a system and its properties, it has emerged as a leading diagnostic for studying matter in experiments, particularly in the research of matter at extreme conditions. Due to the characteristic extreme temperatures, pressures and densities of these states of matter, such conditions can only be maintained in experiments for very short times, and necessitate the use of in-situ diagnostics that can fully probe the conditions of the sample in this short duration. The rigorous diagnosis of matter in extreme conditions is of great interest. For one, such conditions are very common in the universe and are found in numerous astrophysical objects [ 7 , 8 , 9 , 10 ] . Second, a number of technological advancements in materials discovery [ 11 , 12 , 13 , 14 , 15 ] and inertial fusion energy [ 16 , 17 , 18 ] utilise matter in extreme conditions, and further developments will benefit from the ability to accurately measure system properties. X-ray Thomson scattering is therefore a potentially very powerful diagnostic, if one knows how to extract information from the scattering spectrum. In practice, however, this is very challenging. First, the SIF needs to be removed from the XRTS signal in order to extract any properties [ 6 ] . Owing to both the instability of deconvolution to noise and the finite spectral range of the spectrometer, direct deconvolution is not possible. Additionally, the instrument function of the spectrometer is typically non-trivial [ 19 ] , which adds another layer of uncertainty in whatever deconvolution approach is used. Second, information is encoded in the shape of the DSF and directly extracting that information can, depending on the property of interest, be difficult. For both these reasons, so-called “forward fitting” has become the de-facto method for analysing XRTS data. In this approach, a model of the DSF is fit to the XRTS data, accounting for the SIF broadening, with available models varying wildly in levels of detail and complexity. On the simplest end, there is the Chihara decomposition [ 20 , 21 , 2 ] , which treats systems in a chemical picture, and allows for the extremely rapid estimation of system conditions. While often a decent agreement between model and experiment can be achieved, this does not guarantee a correct interpretation of the measurement to the large number of free parameters in the Chihara approach; for example, Böhme et al. [ 22 ] have recently shown that the physically mandated free-bound contribution to the spectrum, which has been neglected in previous models, was erroneously compensated by other features. Furthermore, such chemical models neglect all the physical structure of a system, meaning detailed examination on the electronic properties of a system are not possible. On the other end of complexity, there are full ab initio approaches such as time-dependent density functional theory (TDDFT) [ 23 , 24 , 25 , 26 ] . In this approach, the full electronic structure is self-consistently calculated, allowing for very detailed predictions of the DSF. Indeed, TDDFT is in-principle a quasi-exact method, where approximations are introduced by use of an approximate form of the exchange-correlation functional and kernel [ 27 , 28 , 29 , 30 , 31 ] , neither of which are known exactly. The added detail in the predictions of TDDFT also comes with a massive increase in computational cost over Chihara models, but the ability to understand the electronic properties of a system in detail makes this is a worthwhile expense in many situations. Of course, we want to be certain in TDDFT’s ability to accurately predict the DSF of a system, particularly as recent TDDFT simulations predict surprising changes in the DSF of materials undergoing isochoric heating [ 32 , 33 ] . Direct comparison of the predictions of TDDFT with experiment seems a natural starting point, however the aforementioned use of models to interpret scattering spectra already presents a problem: theory is used to interpret experiment, which in turn is being used to benchmark the theory, etc.. Useful experimental benchmarking therefore requires many variables, such as the temperature and density of the system, to be as controlled as possible. Furthermore, the convolution with the SIF also makes direct comparisons challenging as the broadening obscures features, and can therefore allow a number of potential DSFs to produce similar looking XRTS spectra. One approach to dealing with the SIF is to use a setup in which it is so narrow and simple that is has a negligible impact on the measured spectrum. This would then allow for the direct comparison of a predicted spectrum with experiment. Such an ultrahigh resolution setup has recently been demonstrated at the HED Scientific Instrument at the European XFEL [ 34 ] , providing a spectral range of 10s of eV but with a resolution \sim 0.1 eV. Comparisons between the scattering spectra of ambient aluminium (Al) measured at multiple scattering angles and the predicted DSFs by TDDFT were also performed, and it was shown that once the broadening effect from the finite size of the spectrometer was properly accounted for, the predictions of TDDFT matched the experimental data very well. This represented a promising result that even relatively simple TDDFT calculations can make accurate predictions of the electronic response of simple metals. As a material, Al is quite a simple system to model: Al foils are polycrystalline, so any measured signal would be the average over

Read the complete text