Spin Hall magnetoresistance at the altermagnetic insulator/Pt interface
Miina Leiviskä a,⋆, Reza Firouzmandi a, Kyo-Hoon Ahn, Peter Kubaščik, Zbynek Soban, Satya Prakash Bommanaboyena, Christoph Müller, Dominik Kriegner, Sebastian Sailler, Denise Reustlen, Michaela Lammel, Kranthi Kumar Bestha, Matěj Hývl, Libor Šmejkal, Jakub Železný, Anja U. B. Wolter, Monika Scheufel · 2025
Read Spin Hall magnetoresistance at the altermagnetic insulator/Pt interface by Miina Leiviskä a,⋆, Reza Firouzmandi a, Kyo-Hoon Ahn, Peter Kubaščik, Zbynek Soban, Satya Prakash Bommanaboyena, Christoph Müller, Dominik Kriegner, Sebastian Sailler, Denise Reustlen, Michaela Lammel, Kranthi Kumar Bestha, Matěj Hývl, Libor Šmejkal, Jakub Železný, Anja U. B. Wolter, Monika Scheufel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-19198.txt.
Introduction
Miina Leiviskä and a very large team of co-authors wrote this 2025 condensed matter paper on a magnetic fingerprint at the border between platinum and an altermagnetic insulator. Spin Hall magnetoresistance lets the resistance of a heavy metal report on the magnet touching it, as spin currents reflect or drain at the interface. Their insulator, a barium cobalt germanate, belongs to the new altermagnet family, magnets that hide their magnetism in compensation.
The pair of materials showed a relatively large resistance signal, and, strikingly, the signal depended on which crystal direction the current took through the channel. The team tested and ruled out several mundane explanations. Their favored reading blames anisotropic spin current channels across the interface itself. The result gives altermagnet research a sensitive electrical probe.
Catalog record
| CREATOR | Miina Leiviskä a,⋆, Reza Firouzmandi a, Kyo-Hoon Ahn, Peter Kubaščik, Zbynek Soban, Satya Prakash Bommanaboyena, Christoph Müller, Dominik Kriegner, Sebastian Sailler, Denise Reustlen, Michaela Lammel, Kranthi Kumar Bestha, Matěj Hývl, Libor Šmejkal, Jakub Železný, Anja U. B. Wolter, Monika Scheufel |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-19198
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Spin Hall magnetoresistance at the altermagnetic insulator/Pt interface Miina Leiviskä a,⋆, Reza Firouzmandi a, Kyo-Hoon Ahn, Peter Kubaščik, Zbynek Soban, Satya Prakash Bommanaboyena, Christoph Müller, Dominik Kriegner, Sebastian Sailler, Denise Reustlen, Michaela Lammel, Kranthi Kumar Bestha, Matěj Hývl, Libor Šmejkal, Jakub Železný, Anja U. B. Wolter, Monika Scheufele, Johanna Fischer, Matthias Opel, Stephan Geprägs, Matthias Althammer, Bernd Büchner, Tomas Jungwirth, Lukáš Nádvorník, Sebastian T. B. Goennenwein, Vilmos Kocsis, Helena Reichlova Abstract The resistance of a heavy metal can be modulated by an adjacent magnetic material through the combined effects of the spin Hall effect, inverse spin Hall effect, and dissipation of the spin accumulation at the interface. This phenomenon is known as the spin Hall magnetoresistance. The dissipation of the spin accumulation can occur via various mechanisms, with spin-transfer torque being the most extensively studied. In this work, we report the observation of spin Hall magnetoresistance at the interface between platinum and an insulating altermagnetic candidate, Ba 2 CoGe 2 O 7 . Our findings reveal that this heterostructure exhibits a relatively large spin Hall magnetoresistance signal, which is anisotropic with respect to the crystal orientation of the current channel. We explore and rule out several potential explanations for this anisotropy and propose that our results may be understood in the context of the anisotropies of the spin current channels across the Pt/altermagnetic Ba 2 CoGe 2 O 7 interface. I Introduction Spin Hall magnetoresistance (SMR) is an actively researched magnetoresistive effect present in bilayers of a magnet - here insulating (MI) - and a heavy metal (HM) [ 1 , 2 , 3 ] . It relies on the concerted action of spin Hall (SHE) and inverse spin Hall effects (ISHE): driving a current ( \mathbf{j_{c}} ) in the HM layer generates a spin accumulation ( \boldsymbol{\mu}_{s} ) at the HM | MI interface via SHE and depending on the spin transparency of this interface the generated spin current ( \mathbf{j_{s}} ) can flow into the MI ( \mathbf{j^{abs}_{s}} ) while any back-reflected spin current ( \mathbf{j^{ref}_{s}} ) is re-converted to a charge current via ISHE. This process is illustrated in Figure 1 a. The spin current transparency of the interface is sensitive to the (sublattice) magnetic moment direction ( \mathbf{m} ) of the MI layer - rotating \mathbf{m} will modulate the resistivity of the HM layer. Typically, when \boldsymbol{\mu}_{s} and \mathbf{m} are parallel more spin current is reflected back at the HM | MI interface resulting in a low-resistance state, while when \boldsymbol{\mu}_{s} and \mathbf{m} are perpendicular to each other, more spin current is absorbed by the MI resulting in a high-resistance state. The SMR ratio, which quantifies the relative resistance difference between these two states, is typically of the order of 0.01% in MI/Pt heterostructures [ 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 ] . † † a These authors contributed equally. *[email protected] In the initial theoretical models describing the SMR, the variation of the interface spin-current transparency as a function of the relative angle of \boldsymbol{\mu}_{s} and \mathbf{m} was explained in terms of the spin-transfer torque (STT) at the interface [ 2 ] : if \boldsymbol{\mu}_{s} and \mathbf{m} are parallel, STT is zero and the spin current is reflected back while if \boldsymbol{\mu}_{s} and \mathbf{m} are perpendicular, maximum STT is exerted on \mathbf{m} and the spin current is absorbed by the MI. However, in principle any mechanism through which the spin accumulation can dissipate from the interface will contribute to the SMR ratio. For example, thermal fluctuations allow for spin-flip scattering at the interface and give rise to injection/annihilation of thermal magnons, resulting in a maximum flow of spin current when \mathbf{m}\parallel\boldsymbol{\mu}_{s} [ 11 , 12 , 13 , 14 , 15 ] . A recent theoretical work by Reiss et al. provides a comprehensive account of the various channels through which spin current can enter the MI layer [ 16 ] . In dc-measurements on HM | MI heterostructures, three primary contributions (summarized in Figure 1 b) are expected: i) STT and spin-pumping at the HM | MI interface, ii) incoherent thermal magnon creation/annihilation at the HM | MI interface, and iii) magnon capacitance (i.e. accumulation and dissipation of magnons in the MI). Figure 1: (Color Online) a) Spin Hall magnetoresistance in HM/MI heterostructures, where charge current ( \mathbf{j_{c}} ) generates a spin current (1) that can be either reflected ( \mathbf{j^{ref}_{s}} ) or absorbed ( \mathbf{j^{abs}_{s}} ) at the interface depending on the available spin current channels across the interface (2,3). When there are no available channels the spin current is reflected and converted back to charge current (2) and when the channels are open the spin current is absorbed by the MI (3). This modulates the resistivity of the HM. b) Three channels contributing to the SMR ratio in magnetic insulators in the dc-limit: i. STT and spin pumping, ii. excitation of longitudinal magnons, and iii. magnon capacitance. Channel i. is relevant when \boldsymbol{\mu}_{s}\perp\mathbf{m} and channels ii. and iii. are relevant when \boldsymbol{\mu}_{s}\parallel\mathbf{m} . c) The crystal structure of BCGO. The spins of the magnetic sublattices are marked in red and blue and the spin canting is exaggerated for the sake of clarity. Altermagnets are a newly identified class of collinear compensated magnets which differ from antiferromagnets by their combined spin and crystal symmetry. Altermagnets have characteristic spin-degenerate nodes and alternating even-parity spin polarization splitting that breaks time-reversal symmetry [ 17 , 18 , 19 , 20 ] . They exhibit unconventional properties that are potentially favorable for spintronics and magnonics, such as the unconventional anomalous Hall effect [ 21 , 22 ] , the generation of highly anisotropic and strongly spin-polarized currents in the absence of a net magnetization [ 23 , 24 , 25 , 26 ] , the accompanying unconventional giant/tunneling magnetoresistance [ 27 , 28 ] and spin-torque effects [ 25 , 26 ] , or anisotropic chirality-split magnon dispersions in the absence of external magnetic field [ 29 , 30 ] . Notably, also the record SMR ratio (0.25 %) in insulators has been observed in heterostructures of Pt and the insulating altermagnetic candidate \alpha -Fe 2 O 3 [ 10 ] . This greatly surpasses the SMR ratio in heterostructures incorporating ferrimagnetic insulators, such as yttrium ion garnet (0.16 %) [ 3 ] , and antiferromagnetic insulators, such as NiO (0.08 %) [ 9 ] . This may suggest that the type of magnetic ordering of the MI plays a role in determining the SMR ratio. Recently, SMR has been even suggested as a tool for determining the spin order in altermagnets [ 31 ] . In this work, we present our measurements of SMR in an altermagnetic candidate and ferroelectric insulator Ba 2 CoGe 2 O 7 (BCGO) [ 32 ] . We first detail the fabrication of devices for SMR experiments on bulk single crystals of BCGO, followed by the analysis of the SMR features on BCGO/Pt heterostructures. Notably, we show that the SMR ratio (of the order of 2 \times 10^{-4} ) is anisotropic depending on the crystal direction of the applied current. We discuss this observation in the context of various factors such as magnetic