Reconstruction of the vector meson propagator using a generalized eigenvalue problem

Kalman K. Szabo · 2025

Read Reconstruction of the vector meson propagator using a generalized eigenvalue problem by Kalman K. Szabo (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-19186.txt.

Introduction

Frech, Stokes, and Szabo sharpen a lattice computation in 2025 of the rho meson's signal. On the space-time grid of lattice QCD, the rho's correlator drowns in noise at long times. The same channel also hosts pairs of pions, which pollute the signal but can be turned into helpers.

The team measures every two-pion propagator below the rho's mass and solves a generalized eigenvalue problem to separate the energy states. From the separated states they rebuild the vector propagator with far less noise at long distances. An efficient measurement scheme for the pion pairs keeps the cost sane in their test volume.

Catalog record

CREATORKalman K. Szabo
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE15 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-19186

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reconstruction of the vector meson propagator using a generalized eigenvalue problem Kalman K. Szabo Abstract For long distances in the euclidean time the vector-vector correlator ( ρ \rho ) has an exponentially decreasing signal-to-noise ratio. However, the vector correlator not only consists of the vector meson but also receives contributions from a two-pion system with the same quantum numbers. We measure all two-pion propagators with an energy lower than the mass of the resting vector meson and employ a generalized eigenvalue problem (GEVP) to resolve the different contributing energy states. Using those we can reconstruct the propagator with a much smaller noise at large euclidean time distances. In this work we present an efficient way to measure two-pion propagators and our results on reconstruction of the vector meson propagator with staggered fermions in a ( 6 3 × 8.5 ) ​ fm 4 (6^{3}\times 8.5)\,\textrm{fm}^{4} box. [a]Fabian J. Frech 1 Introduction The ongoing investigation of the anomalous magnetic moment of the muon, particularly through the g-2 experiment [ 1 ] and corresponding theoretical predictions [ 2 ] , has highlighted a significant discrepancy exceeding 4\sigma . Lattice computations, on the other hand, tend to confirm the experimental results up to 0.9\sigma [ 3 , 4 , 5 , 6 ] . A particularly intriguing aspect of these studies is the long-distance contribution that is dominated by the two-pion states that have a energy lower than the mass of the vector meson. However, the challenge of poor signal-to-noise ratios at these long distances complicates the analysis. Various approaches have been proposed to address this issue. These include the bounding method [ 3 , 8 ] , the fitting method [ 7 , 9 , 10 , 11 , 5 ] , and data-driven techniques [ 4 ] . This article focuses on the application of the fitting method using staggered fermions, as demonstrated in recent studies [ 12 , 13 , 7 ] . Given the high computational cost of connected two-pion diagrams, we present an efficient approach leveraging low-mode averaging to improve the signal quality, offering a promising pathway for more accurate results. 2 \pi\pi contributions to the vector correlator The study of taste-singlet vector mesons at rest within the staggered symmetry group framework, as detailed in various works [ 12 , 14 , 13 , 16 , 17 , 20 , 15 , 18 , 19 ] , offers critical insights into the computation of two-pion contributions to the vector meson propagator. By employing Clebsch-Gordan coefficients [ 21 ] specific to the staggered symmetry group, it becomes possible to accurately determine these contributions. The methods for computing these coefficients, which are fundamental to the construction of the vector meson from two-pion states, are comprehensively discussed in [ 13 ] . Considering a lattice of approximately L=6\,\mathrm{fm} in spatial extension with a spacing of around a=0.13\,\mathrm{fm} , corresponding to a taste-breaking effect of \Delta_{KS}=39484\,\mathrm{MeV}^{2} as noted in [ 4 ] , this reveals that several two-pion states possess lower energies than the vector meson. These states are highlighted in red in table 1 . \|\vec{p}\|^{2}=0 \|\vec{p}\|^{2}=1 \|\vec{p}\|^{2}=2 \|\vec{p}\|^{2}=3 \|\vec{p}\|^{2}=4 \|\vec{\xi}\|^{2}=0 0 1 1 1 1 \|\vec{\xi}\|^{2}=1 0 2 3 2 2 \|\vec{\xi}\|^{2}=2 0 2 3 2 2 \|\vec{\xi}\|^{2}=3 0 1 1 1 1 Table 1: Multiplicities of the the diagram up to momenta of \|p\|^{2}=4 in units of \frac{2\pi}{L} . For pions at rest there is no overlap to a vector-like state. Due to the multiplicity of some of these spin-taste combination, a total of 10 two-pion states contribute to the vector meson propagator. The detailed Clebsch-Gordan coefficients for these contributions, which are crucial for the accurate construction of the vector meson from these two-pion states, are provided in the table below. \vec{\xi}^{2}=0(3) \vec{\xi}^{2}=1(2) \vec{p}^{2}=1(4) C^{\alpha}(\lambda\vec{e}_{i},\vec{0})=\lambda\frac{1}{\sqrt{2}}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i},\vec{f}_{j})=\lambda\frac{1}{\sqrt{2}}\delta^{ij}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i},\vec{f}_{j})=\frac{\lambda}{2}(1-\delta_{ij})\delta^{\alpha i} \vec{p}^{2}=2 C^{\alpha}(\lambda\vec{e}_{i}+\mu e_{j},\vec{0})=\frac{\lambda}{2\sqrt{2}}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j},\vec{f}_{k})=\frac{\lambda}{2\sqrt{2}}|\epsilon^{ijk}|\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j},\vec{f}_{k})=\frac{\lambda}{2\sqrt{2}}\delta^{ki}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j},\vec{f}_{k})=\frac{\lambda}{2\sqrt{2}}\delta^{kj}\delta^{\alpha i} \vec{p}^{2}=3 C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j}+\nu\vec{e}_{k},\vec{0})=\frac{\lambda}{2\sqrt{2}}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j}+\nu\vec{e}_{k},\vec{f}_{l})=\frac{\lambda}{2\sqrt{2}}\delta^{il}\delta^{\alpha i} C^{\alpha}(\lambda\vec{e}_{i}+\mu\vec{e}_{j}+\nu\vec{e}_{k},\vec{f}_{l})=\frac{\lambda}{4}|\epsilon^{jkl}|\delta^{\alpha i} Table 2: The Clebsch-Gordan coefficients needed for construcing the vector meson out of two-pion states. The computation of these coefficients as well as further explanations are given in [ 13 ] . Confirmations can be found in [ 7 , 22 ] . 3 Computation of the connected \pi\pi\to\pi\pi diagram u u \bar{d} \bar{d} \pi^{\dagger}(\vec{x},0) \pi(\vec{y},0) \pi(\vec{z},t) \pi^{\dagger}(\vec{w},t) a) u \bar{d} u \bar{d} \pi^{\dagger}(\vec{x},0) \pi(\vec{y},0) \pi(\vec{z},t) \pi^{\dagger}(\vec{w},t) b) u \bar{d} u \bar{d} \pi^{\dagger}(\vec{x},0) \pi(\vec{y},0) \pi(\vec{z},t) \pi^{\dagger}(\vec{w},t) c) \bar{d} u u \rho^{\dagger}(\vec{x},0) \pi(\vec{z},t) \pi^{\dagger}(\vec{w},t) d) u \bar{d} \rho^{\dagger}(\vec{x},0) \rho(\vec{z},0) e) Figure 1: The diagrams that have to be implemented for GEVP. Diagram c) vanishes identically in the I=1 case. The general strategy to compute the diagrams that are shown in Figure 1 is to include wall sources \zeta at an euclidean time t_{0} and apply the operators of the spin-taste-momentum combination ( \rho/\pi_{\xi}(\vec{p}) ) as well as the inverse staggered operator ( M^{-1}_{t_{1},t_{2}} ). One can easily convince oneself that diagram c) vanishes identically for I=1 . While diagram e) can be computed straightforwardly and diagram b) is given by the product of two diagrams of this type, the two remaining diagrams require methods like sequential inversions in this general approach. For computing diagram d) , we can interchange the \rho state and the two-pion state due to the time-reversibility of QCD. The corresponding scalar product is therefore given by \displaystyle C_{\rho\pi\pi}(t)=\langle\zeta_{t_{0}}M^{-1}_{t_{0},t_{0}+t}\rho|M^{-1}_{t+t_{0},t_{0}}\pi M^{-1}_{t_{0},t_{0}}\pi\zeta_{t_{0}}\rangle. (1) Inversions only have to be applied at t_{0} time slices, and therefore the number of inversions does not scale with the time-extent of the lattice or the domain of C_{\rho\pi\pi} . Nevertheless, this is not the case for the connected part of the two-pion propagator, because it requires two operators at each time slice: \displaystyle C_{\pi\pi\pi\pi}^{\textit{conn.}}(t)=\langle\zeta_{t_{0}}M^{-1}_{t_{0},t_{0}+t}\pi\color[rgb]{1,0,0}M^{-1}_{t_{0}+t,t_{0}+t}\color[rgb]{0,0,0}\pi|M^{-1}_{t+t_{0},t_{0}}\pi M^{-1}_{t_{0},t_{0}}\pi\zeta_{t_{0}}\rangle. (2) The red inversion’s column and row have a time dependence. So overall, we have a number of inversions proportional to \displaystyle N_{\zeta}\times N_{O}\times T/a (3) where T/a is the time extent in lattice units, N_{\zeta} is the number of random sources, and N_{O} is the number of pion operators (which has a strong volume and spacing dependence, typically ranging between 10 and 100). We aim to reduce the cost by splitting up M^{-1} into its eigenvalue and residual parts. The lowest eigenvalues \lambda with the corresponding eigenvectors are labeled by i , the projection of M^{-1} on the orthogonal complement of the lowest eigenvectors is called M_{r}^{-1} : \displaystyle M^{-1} \displaystyle=\sum_{i}\frac{1}{\lambda_{i}}\ket{i}\bra{i}+M_{r}^{-1} (4) \displaystyle\approx\sum_{i}\frac{1}{\lambda_{i}}\ket{i}\bra{i}+\sum_{\sigma}\ket{\sigma}\bra{\sigma}M_{r}^{-1} (5) Eigenvectors and values are already computed from the preconditioning of the Dirac operator. The vectors \sigma are stochastic sources normalised to give an approxiamtion of the identity. Now the number of inversions is dominated by the ket-vectors in Equation 2 , so we removed the T/a factor in the total amount of inversions. Figure 2: On the right-hand side, one can see the volume scaling of the LMA method compared to the usual sequential inversion. On the right-hand side, one can see the scaling with the number of operators. Both plots use 1500 eigenvectors and 18 random wall sources \zeta . To estimate the residual part, we include T/2 random sources \sigma . In figure 2 , one can see the scaling of the computational time of the LMA method compared to the usual sequential inversion with respect to the volume and the number of operators. One

Read the complete text