Beamforming Design for Secure RIS-Enabled ISAC: Passive RIS vs. Active RIS
Vaibhav Kumar, and Marwa Chafii · 2025
Read Beamforming Design for Secure RIS-Enabled ISAC: Passive RIS vs. Active RIS by Vaibhav Kumar, and Marwa Chafii (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-19157.txt.
Introduction
Vaibhav Kumar and Marwa Chafii design beams for a system that must sense and communicate at once, without letting the sensed target listen in. Integrated sensing and communication is slated as a basic sixth-generation service. The catch is structural: the target of sensing sits inside the information-bearing signal, receiver in hand. Reconfigurable surfaces can harden the physical layer, but passive surfaces suffer multiplicative fading.
The paper maximizes beampattern gain under reception quality floors for users and leakage ceilings at the eavesdropping target, for both passive and active surfaces. A successive convex approximation method updates every variable at once each round, unlike alternating schemes. Simulations show clear superiority over a penalty-based alternating benchmark for the passive case. Active surfaces deliver notably higher beampattern gain in turn, at their known energy cost.
Catalog record
| CREATOR | Vaibhav Kumar, and Marwa Chafii |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 96 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-19157
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Beamforming Design for Secure RIS-Enabled ISAC: Passive RIS vs. Active RIS Vaibhav Kumar, and Marwa Chafii Abstract The forthcoming sixth-generation (6G) communications standard is anticipated to provide integrated sensing and communication (ISAC) as a fundamental service. These ISAC systems present unique security challenges because of the exposure of information-bearing signals to sensing targets, enabling them to potentially eavesdrop on sensitive communication information with the assistance of sophisticated receivers. Recently, reconfigurable intelligent surfaces (RISs) have shown promising results in enhancing the physical layer security of various wireless communication systems, including ISAC. However, the performance of conventional passive RIS (pRIS)-enabled systems are often limited due to multiplicative fading, which can be alleviated using active RIS (aIRS). In this paper, we consider the problem of beampattern gain maximization in a secure pRIS/aRIS-enabled ISAC system, subject to signal-to-interference-plus-noise ratio constraints at communication receivers, and information leakage constraints at an eavesdropping target. For the challenging non-convex problem of joint beamforming design at the base station and the pRIS/aRIS, we propose a novel successive convex approximation (SCA)-based method. Unlike the conventional alternating optimization (AO)-based methods, in the proposed SCA-based approach, all of the optimization variables are updated simultaneously in each iteration. The proposed method shows significant performance superiority for pRIS-aided ISAC system compared to a benchmark scheme using penalty-based AO method. Moreover, our simulation results also confirm that aRIS-aided system has a notably higher beampattern gain at the target compared to that offered by the pRIS-aided system for the same power budget. We also present a detailed complexity analysis and proof of convergence for the proposed SCA-based method. PubID: pubid: I Introduction As the commercial deployment of the fifth-generation (5G)-enabled wireless services are underway across the globe, the third-generation partnership project (3GPP) has recently frozen release 17 (Rel-17) of the 5G standard. This latest release focuses on enhancing multicast and broadcast services, standalone non-public networks (SNPNs), non-terrestrial networks (NTNs), and reduced capability (RedCap) services, among others [ 2 ] . The researchers are now looking ahead for the development of next-generation wireless standard to create a smart and connected wireless ecosystem, that requires a paradigm shift to support high-accuracy sensing capability along with high-quality wireless connectivity [ 3 ] . In their latest release (Rel-19), 3GPP has formed a technical specification group (TSG) to study the use-case of such sensing-aided wireless systems for intrusion detection in an outdoor/indoor area, rainfall/flood monitoring, autonomous maneuvering and navigation, monitoring the trajectory of an unmanned aerial vehicle (UAV), collision avoidance in an UAV network via network-assisted sensing, healthcare monitoring, extended-reality (XR) streaming, and advanced driver assistance system (ADAS) among various other applications. Based on the 3GPP-TSG studies, it is envisioned that sensing will be offered as a basic functionality in the sixth-generation (6G) wireless communications standard, resulting in a recent surge of research interest in integrated sensing and communication (ISAC). Through the integration of communication and sensing capabilities in a single network infrastructure, ISAC can exploit common hardware, as well as spectral and signal processing framework; it thereby can enjoy integration as well as coordination gain [ 4 , 5 , 6 ] . At a higher level, ISAC can be classified into two categories: i) device-free ISAC, and ii) device-based ISAC. The former is based on device-free sensing in which the sensing targets do not have any transceiver capability, while in the latter case, sensing is facilitated via device-based sensing where the sensing targets are capable of transmitting and/or receiving radio signals [ 7 ] . However, ISAC systems can also be classified based on the design requirements including radar-centric design [ 8 ] , communication-centric design [ 9 ] , and joint design [ 10 ] . A comprehensive overview of the signal processing techniques for these three types of aforementioned ISAC systems was presented in [ 11 ] . Some of the notable works on different aspects of ISAC were presented in [ 12 , 13 , 14 , 15 ] . The advantages of an ISAC system over a frequency-division sensing and communications (FDSAC) system were studied in [ 12 ] . Using a mutual-information (MI)-based framework, it was shown therein that ISAC has a broader sensing-communication rate region compared to that of FDSAC system in both uplink and downlink scenarios. The problems of joint design of transmit and receive beamformers for power consumption minimization and sum rate maximization in a full-duplex (FD) ISAC system were discussed in [ 13 ] . A detailed channel modeling for ISAC combining forward and backward scattering, and including the non-stationarity and correlation between communication and sensing links was presented in [ 14 ] . In [ 15 ] , the authors presented a resource allocation scheme in a unified ISAC framework considering fairness and comprehensiveness criteria for a scalable trade-off between sensing and communication quality-of-service (QoS). In recent times, passive reconfigurable intelligent surface (pRIS) has gained considerable attention as a groundbreaking hardware technology that can further enhance the performance of a wireless communication system [ 16 , 17 ] , including that of ISAC. These pRISs are composed of software-controlled metasurfaces capable of reengineering the wireless propagation media by controlling the phase of the electromagnetic waves reflected from these surfaces [ 18 ] . The authors in [ 19 ] considered the integration of these two emerging technologies, i.e., pRIS and ISAC, and shown that joint sensing and communication (S&C) designs are mostly beneficial when the two channels were coupled together, and that using pRIS can be advantageous in the presence of such channel coupling. Similarly, it was shown in [ 20 ] that the use of RIS in an ISAC system can result in higher accuracy, wider coverage, and ultra-reliable communication and sensing performance. The problem of joint waveform and passive beamforming design for a multi-user multiple-input single-output (MU-MISO) ISAC system to maximize the signal-to-interference-and-noise-ratio (SINR) for radar and minimizing the multi-user interference was considered in [ 21 ] , where the authors proposed a solution to the challenging non-convex optimization problem using block coordinate descent (BCD) method. Similarly in [ 22 ] , the problem of joint beamforming design for pRIS-aided ISAC system was considered under signal-to-noise ratio (SNR) or Cramér-Rao bound (CRB) constraint, and a solution has been obtained using BCD. The authors in [ 23 ] considered the problem of power allocation and beamforming design in an FD pRIS-ISAC system, and proposed a solution using penalty-dual-decomposition (PDD) method and majorization-minimization (MM). A low-complexity method using alternate direction method of multipliers (ADMM) was also proposed therein. Moreover, beamforming designs for simultaneously transmitting and reflecting (STAR)-RIS-aided ISAC system with non-orthogonal multiple access (NOMA), and pRIS-ISAC with rate-splitting multiple access (RSMA) were discussed in [ 24 ] and [ 25 ] , respectively. It is noteworthy that the problem of beamforming design in [ 21 , 22 , 23 , 24 , 25 ] was solved using AO-based approach which results in a notably suboptimal solution due to the intricate coupling between the decision variables. Although ISAC provides a higher design flexibility and superior performance compared to the FDSAC counterpart, it also posses unique security challenges since the information-bearing communication signals are exposed to the potentially eavesdropping sensing targets. However, physical layer security (PLS) is an effective countermeasure