A Linear Quantum Coupler for Clean Bosonic Control

Aniket Maiti, John W. O. Garmon, Yao Lu, Alessandro Miano, Luigi Frunzio, Robert J. Schoelkopf · 2025

Read A Linear Quantum Coupler for Clean Bosonic Control by Aniket Maiti, John W. O. Garmon, Yao Lu, Alessandro Miano, Luigi Frunzio, Robert J. Schoelkopf (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-18025.txt.

Introduction

Aniket Maiti and co-authors propose a cleaner mixer for superconducting quantum computers in a 2025 paper. These machines steer quantum states with driven nonlinear parts, but an ideal part is hard to build: it should switch on wanted processes strongly while staying quiet otherwise. The usual Josephson nonlinearity is so broad that drives trigger stray transitions and wear down the quantum states.

The proposed coupler blends two recent advances, mixers free of one flaw and balanced mixers that forbid many stray processes. Its selection rules make it act almost linear when idle and stay clean even under strong drive. The ideal behavior is simple to analyze and, to first order, shrugs off the main hardware imperfections. The team expect gains in control, readout, and signal boosting.

Catalog record

CREATORAniket Maiti, John W. O. Garmon, Yao Lu, Alessandro Miano, Luigi Frunzio, Robert J. Schoelkopf
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE98 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-18025

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Linear Quantum Coupler for Clean Bosonic Control Aniket Maiti, John W. O. Garmon, Yao Lu, Alessandro Miano, Luigi Frunzio, Robert J. Schoelkopf Abstract Quantum computing with superconducting circuits relies on high-fidelity driven nonlinear processes. An ideal quantum nonlinearity would selectively activate desired coherent processes at high strength, without activating parasitic mixing products or introducing additional decoherence. The wide bandwidth of the Josephson nonlinearity makes this difficult, with undesired drive-induced transitions and decoherence limiting qubit readout, gates, couplers, and amplifiers. Significant strides have been recently made into building better ‘quantum mixers’, with promise being shown by Kerr-free three-wave mixers that suppress driven frequency shifts, and balanced quantum mixers that explicitly forbid a significant fraction of parasitic processes. We propose a novel mixer that combines both these strengths, with engineered selection rules that make it essentially linear (not just Kerr-free) when idle, and activate clean parametric processes even when driven at high strength. Further, its ideal Hamiltonian is simple to analyze analytically, and we show that this ideal behavior is first-order insensitive to dominant experimental imperfections. We expect this mixer to allow significant advances in high-Q control, readout, and amplification. I Introduction Driven superconducting circuits provide a platform for studying complex nonlinear quantum optics and manipulating quantum information in the microwave domain. The intrinsic nonlinearity of Josephson junctions [ 1 ] has been utilized to design numerous circuit elements, ranging from quantum-limited amplifiers [ 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 ] , novel non-reciprocal devices [ 10 , 11 , 12 , 13 ] , ultra-low-noise detectors [ 14 , 15 , 16 ] , and, most notably, quantum information processing through the field of circuit Quantum Electrodynamics (circuit QED) [ 17 , 18 ] . A significant portion of these applications are enabled by nonlinear quantum mixers that activate specific desired processes when parametrically driven with a microwave drive. Such parametric mixers have found use as couplers [ 19 , 20 , 21 , 22 ] , amplifiers [ 9 ] , and even nonlinear oscillators in their own right [ 23 , 24 , 25 ] . Ideally, one desires fast high-fidelity operations that manipulate sensitive quantum information without introducing errors. This requires the driven quantum mixer to turn on desired interactions at high strength, without activating parasitic processes such as drive-induced frequency shifts and leakage to uncontrolled states. A further complication is the finite coherence of the quantum mixer, where any unintended excitation of the mixer out of its ground state can lead to mixer decoherence dominating the infidelity of the parametric process [ 26 ] . In particular, when the mixer is used as a coupler between high-Q modes, it must activate a parametric coupling between them on demand, while not reducing both their idle and driven coherence. One thus aims to engineer the mixer such that it is minimally invasive when idling, and also remains in its ground state and prevents parasitic processes when driven. A common approach to mitigate some parasitic effects is to use a ‘Kerr-free three-wave mixer’ [ 27 , 28 , 7 , 29 , 30 ] , where one utilizes a third-order nonlinearity to generate the desired process with a single drive tone, while nulling the fourth-order (Kerr) nonlinearity. Suppressing the Kerr suppresses spurious processes like the AC Stark shift, which can lead to reduced saturation power in the amplifier context [ 31 , 32 ] , or frequency collisions with other sensitive modes in the coupler context [ 21 ] . However, for high-fidelity applications, this may still be insufficient – in such fragile systems, the loss of even a single photon to some uncontrolled degree of freedom can ruin sensitive quantum information. In particular, at strong drive powers, even Kerr-free mixers are inevitably spoiled by the onset of numerous transitions induced by nonlinearities beyond the fourth order. The effect of these transitions is especially evident at drive powers where the mixer ionizes [ 33 , 34 , 35 , 26 , 36 ] into higher-lying states or enters a chaotic regime, irreversibly spoiling the system’s information. Figure 1: The LINC, a quantum single-balanced mixer a , Fundamentals of mixer balancing. By taking two identical nonlinear elements and driving them 180^{\circ} out of phase (e.g., with a balun), we can create a single-balanced mixer. If the nonlinear element is a single junction, this circuit is the familiar differentially-driven SQUID (DDS, [ 21 ] ). If the nonlinear element is instead a DC flux-biased RF-SQUID, this circuit results in the Linear Inductive Coupler (LINC). The \Pi -T transformation provides a simpler circuit representation. b , An illustration of the advantage of a balanced mixer. In general, a driven nonlinear element will permit numerous nonlinear processes, of which only a small subset is typically desired. Balancing the nonlinear element will suppress a significant fraction of spurious processes (light orange), but preserve the desired process (black) at high strength. Any remaining parasitic processes (red) still permitted by the symmetry must be avoided through other means, like careful selection of drive frequencies. c , The LINC circuit, with a symmetric loop and capacitive pads, enables a separation of driven and undriven mixer behavior. At the operating point where the total DC flux in the outer SQUID loop is half a flux quantum, the loop junctions are biased to effectively infinite inductance, leaving only the linear shunt as the coupler’s inductor. This simultaneously nulls all nonlinearity when idle, which is beyond just being Kerr-free. When threaded with AC flux, the outer loop activates and drives a balanced three-wave mixing process. fig]fig:fig1 To suppress these higher-order nonlinear processes, we can leverage certain symmetries and intuitions in mixer design that further improve their performance by imposing an explicit selection rule on the types of allowed processes that the mixer can activate. These design principles mimic mixer balancing in the classical electrical engineering context, where for example, a single-balanced mixer utilizes symmetries of both the circuit and the drive delivery to coherently suppress approximately half the undesired mixing products (see a-b). This significantly increases the amplitude and frequencies at which the mixer can be driven without spoiling fidelity, especially in the presence of drive-induced shifts. Such symmetries have been put to use before in circuit QED, both in the amplifier context (for e.g., with the JPC [ 5 , 27 ] ) as well as in high-Q control [ 20 ] . Particularly in the parametric coupler context, employing this symmetry in four-wave mixing with a Differentially Driven SQUID (DDS) has shown significant improvement over regular four-wave mixing with a single junction [ 21 ] . Utilizing similar design principles to the DDS, here we introduce a mixer that has an identical Hamiltonian to a balanced flux-biased RF-SQUID pair ( a), but can manifest as a simple dipole element ( c). When operated at a particular DC bias point, idle effects due to the Josephson junctions disappear, and the mixer is exceptionally linear. When driven, the outer SQUID loop activates a three-wave mixing process that obeys a strict selection rule that we call parity protection, forbidding a significant fraction of the remaining parasitic processes. This means that the mixer

Read the complete text